A reliable self-adhesive patch for emergency tyre repairsHigh strength adhesive developed by 3M keeps the patch where you want itSuper tough film material will survive most conditionsSimply place over the cut or tear on the inside of the tyreCan also be used on tubeless tyre systemsAlways replace a torn tyre as soon as possible
Whether you're into road cycling or mountain bike (MTB) trail riding, these emergency tyre boots from Park Tool are specifically designed to quickly and securely repair a cut or worn sidewall on your tyre. This TB-2 model is produced using a strong, waterproof vinyl membrane with a fibre weave reinforcement for excellent durability in all-weather conditions. Another highlight is it comes equipped with a super-strong pressure-sensitive adhesive that assures each boot patch stays in place in any tubed tyre, road or mountain, high or low pressure. Simply place one of these patches over the cut or tear on the inside of your tyre and continue your ride without any worries. Coming as a pack of three tyre boot patches, each one measures approximately 76x45mm (3x1.75"). Manufacturer's Part Number: QKTB2C
Park Tool Essential Bike Tool Kit (WTK-2)Designed for the casual cyclist, the economical WTK-2 contains the tools needed for many basic adjustments and repairs at home or on the road. Never be caught out on the roadside again by having this kit with you at all times. Features: TL-1.2 tyre Levers (2) AWS-9.2 Fold-Up Hex Wrench Set TB-2 tyre Boots (2) GP-2 Pre-Glued Super Patch Kit Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed for the casual cyclist, the economical WTK-2 contains the tools needed for many basic adjustments and repairs at home or on the road.
Key Features: A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy,Durable composite body is durable and prevents scratching of expensive components,Angled Shimano&Reg; Di2&Reg; E-TUBE&Reg; ends allow for both installation and removal in tight spaces,Universal coin cell tool helps remove and install battery covers on SRAM&Reg; eTap&Reg;.
The Park Tool EWS-1 Electronic Wire 3-Way Tool is a handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy.Durable composite body is durable and prevents scratching of expensive componentsAngled Shimano; Di2; E-Tube; ends allow for both installation and removal in tight spacesUniversal coin cell tool helps remove and install battery covers on SRAM eTap
The Park Tool FAG2 Frame Alignment Gauge helps solve the problem of many bicycles not shifting or tracking properly. This can be the result of the front and rear wheels not being in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop-outs of the frame may be misaligned. For years the accepted method to check the alignment of the rear drop-out was to run a string on either side. This method does work to some extent. However, it is not accurate because the measurement is not taken at the drop-out. With the Park Tool Frame Alignment Gauge the alignment can be checked quickly and accurately at the drop-out. Retractable pointer to fit all sizes and types of bicycles.
The Park Tool FFG2 Frame And Fork End Alignment Gauge Set helps to eliminate improperly aligned frame and fork dropouts. Such issues can cause bent axles and quick release skewers, as well as tracking and shifting problems. The updated FFG-2 quickly determines whether dropouts are aligned and parallel. If an error is detected, long handles and comfortable molded grips afford plenty of leverage for straightening. Works on frames and forks with dropout spacing up to 160mm.
Improperly aligned frame and fork dropouts can cause bent axles and quick release skewers, as well as tracking and shifting problemsThe FFG-2 quickly determines whether dropouts are aligned and parallelIf an error is detected, long handles and comfortable moulded grips afford plenty of leverage for straighteningWorks on frames and forks with dropout spacing up to 160 mm
Sized to fit rings with an outside diameter of 41, 42, 43, and 44mm
Park Tool Fixed-Gear Lockring Wrench (HCW-17)An essential tool for your workshop, this Fixed-Gear Lockring Wrench benefits from two radius hooks for an optimised fit when working on fixed-gear lockrings.Features:11-5/8" (29cm) in length for excellent leverage.Fits: Fixed-gear lockrings with an outside diameter of 41, 42, 43, and 44mm, Single speed cassette hubs using lockrings with external notches, Four-notch Bafang® BBSH, BBS02 Mid Drive motor lockringsBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Flat Faced Socket Set (SKT-6) When it comes to maintaining and tuning your suspension for optimum performance, not only do you require the correct tools, but you need them to offer as precise a fit as possible. The Flat Faced Socket Set SKT-6 provides just that. Shop Quality Precision Sockets These sockets will work with most suspension fork fittings, making them a universally handy tool to have and are perfect for using with park Tool's Torque Wrenches for maximum compatibility. Durable and designed for regular use, the sockets are forged from chrome vanadium steel and are chrome plated to give additional toughness and longevity. Each socket is a 3/8" drive and range from 24mm to 32mm to allow you to work on a number of different sized fittings. The Flat Faced Socket Set SKT-6 is a great addition to any mechanic's toolbox or home workbench. Features: Material: Tough Chrome Vanadium Steel + Chrome Plated Included Sockets: 6 - 24 mm, 26 mm, 27 mm, 28 mm, 30 mm, 32 mm (27 mm is tapered for improved use on Suntour suspension forks) Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.