Park Tool Crown Race Setting System (CRS-15.2)Designed for the fitting of bearing races for 1.5" and 1-1/4" forks, the Crown Race Setting System CRS-15.2 allows you to do so in an easy, damage-free manner. Safe and Accurate Race Seating The system utilises two different insert rings and a further aluminium insert to ensure there is no direct contact with your bearing's surface as you lightly hammer the tube's end cap to seat the race firmly and properly in place. Including an extension that will allow you to work on fork steering tubes up to 425mm, the Crown Race Setting System CRS-15.2 will allow you to fit your races safely and accurately. Features: Material: Aluminium SHIS Terminology: CRS-15 services crown races in SHIS 33 and 40. Compatible Bearing Races: 1.5", 1-1/4" Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Disc Brake Mount Facing Set (DT-5.2) Designed for accurate facing of front and rear disc mounts, the Park Tool Disc Brake Mount Facing Set DT-5.2 is a precision tool system that helps to eliminate poor brake performance, noisy braking and premature wear of parts caused by misaligned disc brake mounts.Robust and VersatileSuitable for facing IS Mounts, Post Mounts and low clearance chainstay mounts, the DT-5.2 works with any open or thru-axle dropout setup and width thanks to its telescopic axle adaptors. Complete with a pair of IS Mount and Post and Flat Mount cutters and a solid, compact storage case, the Park Tool Disc Brake Mount Facing Set DT-5.2 is just the job for any workshop or service area.Features: Compatible Mounts: Any IS Mount, Post Mounts, Flat Mounts, Low-Clearance Chainstay Mounts Compatible Axles: Open, Thru-Axle (including Boost 110, Boost 148 and all fat bike axles) Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Adjustable Crown Race Puller CRP-2The CRP-2 from Park Tool is a highly-precise workshop tool for the accurate, simple and safe removal of fork crown races. This fully adjustable and easy to use tool allows for accurate adjustment of the individual blades, which are positioned around the edges of the crown race, once set tight, the crown race can be pulled off efficiently without any risk of damaging the fork. This tool is very versatile and fits around most possible interferences caused by fork top caps and crown protrusions.Features: Material: Steel Compatible Steerer Diameter: 1", 1-1/8", 1-1/4", 1.5 forks - Suspension and Rigid Compatible Steerer Tube Length: 14 to 43cm (5.5 to 17 inches)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Frame & Fork Alignment Gauge Set (FFG-2)The Park Tool Frame & Fork Alignment Gauge Set FFG-2 is the ultimate toolset to determine if your bike/fork dropouts are out of alignment. Badly aligned dropouts, which are usually caused by frame bending can cause bent axles and skewers, and can also cause tracking, shifting and steering issues. Grip and Leverage for Dropout Re-AlignmentThe FFG-2 quickly and accurately enables you to determine if your bike frame or fork needs re-aligned. If there is an alignment error, the long leverage handles and comfortable moulded grips provide plenty of grip and leverage for straightening and re-aligning the dropouts.Features: Material: Chrome-Plated Steel Compatible Hub Widths: From 100 to 160mmBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Frame Alignment Gauge (FAG-2) The Frame Alignment Gauge FAG-2 from Park Tool is a specifically designed device for accurate measurement of your frame's positioning, taking its reading with precision, direct from the drop out.Quick and Easy Alignment Measurement When your frame is off kilter with your wheels, shifting and tracking can often be impacted, lowering you and your bike's performance. Even after adjusting wheels and derailleurs, your frame may still not be in the right position. With the Frame Alignment Gauge FAG-2, you can quickly and accurately see exactly what realignment is required to straighten out the issue. Suitable for use on all types of bikes, the FAG-2 has a retractable pointer for making sure alignment is properly achieved on any size of bicycle. Features: Retractable pointer for use on all sizes and types of bike Accurate and precise alignment measurement, direct from the drop out Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Cassette Lockring Tool FR-5.2GTThis Cassette Lockring Tool from Park Tool has been designed to easily remove and install lockrings on hubs. Suitable to be used with a variety of cassettes and disc brakes, this versatile tool is ready for the task. Shimano, SRAM and SunRace CompatibleStabilised by a strong 12mm guide pin, the tool fits 12mm thru-axles and ensures a proper and true fit. The depth of the 12-splines on the tool also allows for solid engagement in any compatible lockring. Suitable for use with 12-spline cassette lockrings from Shimano, SRAM, SunRace, SunTour, Chris King and others (23.5mm diameter), as well as other Shimano and similar disc brake rotor lockrings, the Cassette Lockring Tool FR-5.2GT is a must for any mechanic's workshop.Features: Compatibility: Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) + Shimano and similar disc brake rotor lockrings Hex-shaped base of tool fits 1" (25.4 mm) socket or wrenchGuide Pin Size: 12 mm Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Cassette Lockring Tool FR-5.2GReplace and install your Shimano and SRAM lockrings with ease thanks to this Cassette Lockring Tool from Park Tool.Versatile and Easy Lockring RemovalDesigned to help remove most common 12-spline cassette lockrings, this handy device will work with hollow quick-release axles, using its 5mm guide pin to stabilise the tool while in use. The FR-5.2G ensures proper fit and solid engagement with any lockring, while its thin-wall construction allows you to remove them without having to take out any cones or locknuts from the hubs. A great effort-saving addition to any toolbox, the Cassette Lockring Tool FR-5.2G will get your cassettes off and on in no time.Features: Material: Heat-Treated Alloy Tool Steel Compatibility: Shimano, SRAM (including 1x) SunRace, SunTour, Chris King, some Shimano disc brake lockrings and other 12-spline lockringsSize: 1" base, 12 splines approximately 23.4mm acrossBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Fold-Up Wrench Set (FWS-2) Park Tool have paired up their popular TWS-2 and AWS-10 wrench sets to give riders and mechanics alike the ultimate collection of fold-up wrenches with the Fold-Up Wrench Set FWS-2. Bringing all of their hex and Torx compatible wrench sizes to the party in one go, this set of wrenches is another workshop essential from Park Tool. Shop Grade, Professional Quality Tools Housed within lightweight and comfortable handles, the industrial tool steel constructed wrenches easily fold out for quick and efficient use, and thanks to the handle's non-slip grip, 40% stronger than a standard steel handle, you can work away with confidence and quality in your hands. Each of the tool tips have been chamfered for perfect fit and have been tempered for durability and long-lasting use, making the Fold-Up Wrench Set FWS-2 the perfect multi-wrench combination for your toolkit. Features: Material: Hardened and Tempered Industrial Tool Steel Wrench Sizes: AWS-10 hex Wrenches - 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, and 6 mm, TWS-2 Torx Wrenches - T7, T9, T10, T15, T20, T25, T27, T30 and T40 Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover (FR-1.3) The Freewheel Remover FR-1.3 is another well-crafted tool from Park Tool, designed for the efficient and easy removal and installation of the most common thread-on 12-spline 5-10-speed freewheels. Simple Freewheel Removal and Fitting Fitting perfectly on to your axle, the FR-1.3 makes light work of fastening or loosening your freewheel for quick and easy removal and replacement. Compatible with a wide range of freewheels, this Park Tool device features an enlarged thru-hole, capable of accepting wheels with axles up to 14mm diameters, including E-Bike wheels. The 1" hexagonal end of the FR-1.3 makes it easily compatible with most wrenches and bench vices for additional leverage and support. Features: Compatibility: Shimano, Sachs Aris, Sun Race, DNP Epoch and other 5-10-speed freewheels Size: 22.6 mm Diameter + 1" Hexagonal Head Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Frame & Fork Straightener (FFS-2)Keeping your frames and forks as straight as possible e easy by the Park Tool Frame and Fork Straightener FFS-2. Bringing your components back to their true alignment with ease, this is a great tool to have in the workshop or in your kit bag for on-the-go adjustments. Versatile and Professional-Quality Maintenance The Park Tool Frame and Fork Straightener FFS-2 has an adjustable hook which will work with tubes up to 1 3/4" in diameter and makes use of over 8 inches of sliding travel adjustment, to get the perfect alignment of your forks and frames plus your cranks and handlebars. A vinyl coating on both the hook and fulcrum also protects your paintwork meaning you can work away without fear of doing cosmetic damage to your bike, making this a truly versatile and essential maintenance tool. Features: Sliding Travel Adjustment Range: Over 8 inches Compatibility: Frames, Forks, Cranks, Handlebars Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Cassette Lockring Tool FR-5.2Enjoy quick and simple removal and installation of cassette lockrings with this handy tool from Park Tool. Designed to be hassle-free, this lockring tool is suitable for use with a variety of cassette lockrings, making it a versatile essential for any cycle workshop.Easy and Efficient Lockring RemovalDurably built from heat-treated alloy tool steel, for daily garage and workshop use, the Park Tool Cassette Lockring Tool FR-5.2 has a thin wall construction, with 12 splines for accurate engagement with similarly splined lockrings. Specially designed to make the job easy, there is no need to remove cones and locknuts when using this fantastic bit of kit.Sized perfectly to be used with a lockring wrench or bench vice for extra leverage, the tool is compatible with a range of cassette lockrings including Shimano, SRAM, and Chris King, and some Shimano disc brake lockrings. With the Park Tool Cassette Lockring Tool FR-5.2 in your toolbox, you will never be short of work. Features: Material: Heat Treated Alloy Tool Steel Compatibility: Shimano, SRAM (including 1x), SunRace, SunTour, Chris King, and other cassette lockrings + some Shimano disc brake lockrings Size: 1" base with 12 splines (approximately 23.4mm across), 12mm centre bore for axle clearance Note for Usage: Hold the tool in place with a quick-release skewer and have it snug to cogs when loosening. Use the axle nut for solid axles.Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Ratcheting Metric Wrench Set (MWR-SET) Park Tool have put together a fantastic collection of professional standard wrenches with their Ratcheting Wrench Set MWR-SET, which will take pride of place in any toolbox or workshop due to their sturdy and durable steel construction. A Durable and Vibrant Two-Way Ratchet Tool Vinyl-dipped in Park Tool's signature blue for a great look and comfortable grip, each of the 12 double-ended wrenches will make loosening and tightening your components as simple as possible. Constructed from chrome-plated chrome vanadium steel, these wrenches offer exceptional quality and longevity for day-after-day use on nuts and bolt sizes ranging from 6mm to 17mm. Convenient, multi-functional and stylish, the Park Tool Ratcheting Wrench Set MWR-SET is an essential collection for any mechanic. Features: Wrench and Ratchet End Material: Chrome-Plated Chrome Vanadium Steel Handle Material: Vinyl Wrench Sizes: 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.