The Park Tool CC2 Chain Checker helps alleviate poor shifting and uneven drive train wear. Most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with the Park Tool Chain Checker. Simply insert the Chain Checker s pins into two links, press the swing arm gauge tight, and then check the gauge window for an accurate reading. Consider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too.
The Park Tool CC3.2 Chain Wear Indicator can help identify a worn chain and save you money - worn chains will not only shift poorly but they wear sprockets and chainrings at an accelerated rate. The CC3.2 is a "go, no go gauge designed to accurately indicate when a chain reaches 0.5% and 0.75% wear, the points at which most chain manufacturers suggest replacement for the new super narrow 11 and all other (7, 8, 9 & 10 speed) chains respectively as per most manufacturer's recommendations. The latest 3.2 version of this tool is longer for added accuracy and is made from precision, laser cut steel for long life and quality.
A worn chain shifts poorly and wears sprockets at an accelerated rateThe CC-3 is a Go / No-Go gauge designed to accurately indicate when a chain reaches 0.75% and 1% wear - the point at which most chain manufacturers suggest replacementThe chain should be replaced soon if the 0.75% side fits into the chain, before other drive train components also start to wear out fastIf the 1% side fits into the chain, the chain is worn out and should be replaced immediatelyMade from precision, laser cut steelConsider that if you replace a chain because of wear other vital drive-chain components may need to be renewed too10-speed compatible
The Park Tool CCP22C is a favourite of shop mechanics for over 30 years and a benchmark crank puller of the cycle industry for over 25 years. The CCP-22 removes cranks using a square taper, Power Drive, or Power Spline bottom bracket interface. A long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest cranks. Designed with a rotating tip to ensure smooth operation and long life.
The benchmark crank puller of the cycle industry for over 25 yearsThe CCP-22 uses a long comfortable handle and extra fine thread that provides the leverage required to remove even the tightest cranksUnique floating-tip design hasbeen updated over the CCP-2 and ensures even smoother operation and longer lifeFits all cranks using 22 mm x 1 threads and square tapered bottom bracket spindles
The benchmark crank puller of the cycle industry for over 25 yearsThe CCP-22 uses a long comfortable handle and extra fine thread that gives the leverage required to remove even the tightest cranksUnique floating-tip design has been updated over the CCP-2 and ensures even smoother operation and longer lifeFits all cranks using 22 mm x 1 threads and square, tapered bottom bracket spindles
The Park Tool CCP44C is specifically designed to remove cranks using an Octalink or ISIS drive bottom bracket interface. The tool uses a comfortable handle, fine thread, and a special rotating tip for superior leverage, smooth operation, and years of trouble-free service. The CCP44C will not work on crank arms that fit standard square tapered bottom bracket spindles.
The CCP-4 Crank Puller is specifically designed to remove crank arms from splined Shimano Octalink and ISIS Drive bottom bracket spindles that do not use a One Key Release systemIt uses a long, comfortable handle and a fine thread for the leverage needed to remove tight crank armsUnique rotating tip design has been updated over the CCP-4 and ensures even smoother operation and longer lifeNote: The CCP-44 will not work on crank arms that fit standard square, tapered bottom bracket spindles
The Park Tool CCW5C features both 14mm socket and 8mm hex wrench on a long, comfortable handle. The tool is suitable for many common square taper crank bolts. The 8 mm hex can also be used to install some Shimano SPD and SPD-SL pedals range.
14 mm socket and 8 mm hex wrench on a long, comfortable handleSuitable for many common square taper crank bolts8 mm hex can also be used to install Shimano SPD and SPD-SL pedals that feature an 8 mm hex bolt axle design
Park Tool Centering Gauge 1554-1As a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools' many years of experience. The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.Features:The 1554-1 represents a dished rear wheel to assist in centering the TS-2 truing stand The 1554-1 will help align the TS-2 stand, but for accurate work with the TS-2, working with a dishing tool such as the WAG-4 or WAG-5 is recommendedBuy Park Tool Workshop Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.