Park Tool Bike Cleaning Brush Set BCB4.2The essential set for removing dirt and grime from your bike, this bike cleaning brush set from Park Tool has everything you need to keep your bike in good condition. Hard Working and Durable BrushesEach brush in the set has its own set job and is designed for comfort and regular use, with dual density sure-grip handles for a quality feel in your hand. The GSC-1 Gear Clean Brush has two ends, a curved and toothed head to get deep into your gear cogs and a thin brush head to sweep away any exterior debris. The Frame Cleaning Sponge/Bristle Brush will get to work on your bodywork once it's been lathered up using the Soft Bristle Soaping Brush, making sure that there are no stains or stuck-on mud left after each ride. The Tapered Detail Brush will get into the hard to reach nooks on your bike to ensure a top-to-bottom clean is achieved with the Bike Cleaning 4 Brush Set BCB4.2.Set includes:1 GSC-1 Gear Clean Brush1 Tapered Detail Brush1 Frame Cleaning Sponge/Bristle Brush1 Soft Bristle Soaping BrushFeatures:“Sure-Grip” dual-density handles ensure a sturdy grip even with wet handsDouble-ended Gear Brush reaches deep between sprocketsTyre and Frame Tube Cleaning Brush has nylon bristles that wrap around the tyre or frame tubeFrame Cleaning Sponge Brush holds soapy water for maximum cleaning powerTapered Detail Brush reaches into tight access areasBuy Park Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
These bike brushes have “Sure Grip” dual density handles to ensure a positive grip even with wet hands. Each item in this Park Tool Brush Set is specially designed for a specific cleaning purpose: The "Y" brush is for large frame tubes and tyres. It will wrap around these to clean. The wire can also be bent to different shapes for different size tyre and tube shapes. The frame cleaning sponge brush is a combination scrubbing sponge/bristle bush. Very useful between spokes on the rim. Also good for rotors and under the headset, and under the fork. The tapered detail brush also called a "bottle brush" is useful for cleaning hub centres and narrow areas, such as under front derailleurs, behind brakes, etc. The GSC-1 gear brush is for rear derailleur pulleys, rear cogs and any general degreasing. Its comb section is for cleaning between cogs where the bristles cannot reach.
Designed to get the maximum usage out of your chain, this fluid will remove all sorts of dirt and grease build-up from whatever terrain you have been riding. Ideal for use with the CM-5.2 Cyclone Chain Scrubber, and CM-25 Professional Chain Scrubber, or just as a general purpose degreaser, this formula is 100% biodegradable and plant-based, making it a smart and environmentally-friendly choice for getting your chain gleaming again. Safe to use on alloys, plastics and rubber parts and containing a rust inhibitor for added longevity, this Park Tool CB4 fluid will give your chain the best possible clean ahead of lubrication. Note: Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush.
Park Tool Bio ChainBrite Cleaning Fluid CB-4Clean dirt and grime off your bike chain with the ChainBrite Cleaning Fluid from Park Tool. 100% biodegradable, this cleaning fluid is environmentally friendly and offers tough cleaning properties to help lubricate and clean your chain no matter what terrain you've met on the trail. Features:Volume: 450ml/16ozContains rust inhibitor100% BiodegradableCompatibility: CM-5.2 Cyclone Chain Scrubber, CM-25 Professional Chain ScrubberBuy Park Tool from Chain Reaction Cycles, the World's Largest Online Bike Store.
The BKD-1.2 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance.The BKD-1.2 is built for the rigors of daily commercial use, and includes two syringes, hoses with shutoff clips, multi-size bleed blocks and a unique attachable syringe mount, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case.
Park Tool Bladed Spoke Holder BSH-4 A simple yet essential tool for keeping your spokes in check when truing your wheels, the Bladed Spoke Holder BSH-4 will ensure no twists or bends during realignment. Valuable Wheel-Building Aid Suitable for holding a variety of different sized bladed spokes, the holder is equipped with 4 slots to holder your spokes in place while vital repairs are made. It also doubles up as a bladed spoke straightening device when used in conjunction with a spoke nipple wrench, to make sure your wheel remains a wind-cheater and not an egg beater. The Bladed Spoke Holder BSH-4 may look basic, but it proves its worth in keeping your wheels and spokes in check. Features: Compatibility: Spoke Blades from 0.8 mm to 2 mm Width Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fitted with four slots to hold a variety of different sized spokes, the BSH-4 ensures they stay strong and in place while you go about your necessary realignment. Pulling double duty as a spoke straightener when used alongside a spoke nipple wrench, the Bladed Spoke Holder BSH-4 from Park Tool does all it can to make sure your spokes and wheels remain in check.
World famous Park Tool blue vinyl coated handle and stainless steel construction provide years of comfortable use. The ergonomically designed BO-2 is engineered and built to provide tremendous leverage making quick work of any bottle cap. Dishwasher safe Compatible with all major brands of beer Made in the USA and covered by Park Tool's legendary limited lifetime warranty
The ergonomically designed BO-2 is engineered and built to give tremendous leverage, making quick work of any bottle capWorld famous Park Tool blue vinyl coated handle and stainless steel construction provide years of comfortable useDishwasher safeCompatible with all major brands of beer
Park Tool Bottom Bracket Bearing Tool Set BBT-30.4Install and extract bottom bracket bearings with this Bottom Bracket Tool Set from Park Tool. This set includes everything required to easily tackle bottom bracket bearings in a range of bracket systems. Efficient Bottom Bracket Bearing RemovalComprised of a bottom bracket bearing remover and two bushings for fitting new bearings, the Bottom Bracket Bearing Tool Set BBT-30.4 is suitable for removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems. To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings are used with a head cup press (not included) to quickly and accurately press the bearings into the shell.This updated take on the BBT-30.3 features additional length to work with wider fat bottom bracket shells, making the Bottom Bracket Bearing Tool Set BBT-30.4 a great addition to any garage or workshop.Features: Compatibility: BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems Included parts: Extra-long bottom bracket bearing remover, 2 x bushings for use with head cup press (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Park Tool bearing press kit is equipped with one bottom bracket bearing remover and two bushings that will assist with the fitting of new bearings (separately sold headset press tool also required to install pressfit bearing/cups). Ideally suited to removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems, this pack will help you to get the job done in no time at all. An up-to-date version of Park Tool's BBT-30.3, this set gives a longer length to work with wider fat bottom bracket shells, making it a fantastic tool to add to any garage or professional bike workshop. How To Use: To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings (included) are used with a headset press (not included) to quickly and accurately press the bearings into the shell.
Features:A self-contained set for accurate facing of a bottom bracket shell.Simple to use tool which ensures the seating faces of a bottom bracket shell are parallel, which is essential for the smooth running and long life of bottom brackets, especially Shimano HollowTech II.Comes with threaded inserts to ensure the tool is in the perfect position for accurate facing.A powerful spring keeps the cutter at the ideal pressure for a perfect job.High quality cutting head is replaceable.Use with plenty of cutting oil for a superior job.Made in the USA and covered by Park's legendary limited lifetime warranty