Build your own specific tool by adding cutters, reamers and facers to this base tool unit. This kit includes the handle, shaft and the quick release centre cone & nut. Over 20 different reamers and facers are compatible with this central assembly, for numerous headset and bottom bracket standards, or the tool can simply be used to ream a section of the frame which needs a little more clearance Note: No reamers, facers or pilots are included with this set.
Park Tool Head Tube Reaming/Facing Set (HTR-HS)This tool is ideal for customising the actual setup that you require for your bike maintenance. This tool can be modified to face headsets and bottom brackets, press in bearings and headset cups or simply to ream a section of the frame which needs a little more clearance.Build your own specific tool by adding cutters, reamers and facers to this base tool unit. This kit includes the handle, shaft and the quick release centre cone & nut. Over 20 different reamers and facers are compatible with this central assembly, for numerous headset and bottom bracket standards.Note that no reamers, facers or pilots are included with this set.Features:Park Tool part #: HTR-HSUniversally customisable tool for many usesCreate your own tool rather than having many different variants of the same designBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
For the hx-one we had to start with the finest s-2 tool steel, a shock resistant steel which has been refined by swiss and german toolmakers for the optimal balance of strength, hardness, shock resistance and dimensional control. S-2 yields stronger tools with much harder surfaces for prolonged tool and fastener life. The keys are then coated with thin-dense chrome, a process generally reserved for mold tool components or optical grade surfaces inside molding tools. This coating provides the hardest, most dimensionally stable finish possible on each hex key. Finally, each tool is spray coated with a high-grip, high-visibility textured polymer finish for maximum grip and control. No more dropping your tools with greasy fingers or losing them on your workbench!Included with the hx-one essentials kit is the proprietary silca 17-4 stainless magnetic adapter. The adapter with a pleasant magnetic click turns the 6mm hex key into a ¼" socket drive which can fit any common ¼" driver bit. Included in the kit are the 6 most common torx sizes, 2 phillips head and 2 flat head drivers. You can literally handle any modern bicycle fastener with the tools in the box.Each hx-one kit is lovingly packed into a fully CNC machined box made from sustainable beech wood. Each box is hand sanded and finished before receiving the stainless steel silca shield on the lid.One of our goals with this lifetime set of tools was to have it be completely one-hand accessible (we've all been there..). The fine beechwood box uses a magnetic closure system and each tool rests in a CNC machined slot, held in place by a single elastomeric tab. Each tool fits into and out of its slot with a satisfying 'click' so that even when stretched one-handed from work stand to workbench, you can be confident in your placement.
The Park Tool HHP2 Head and Hanger Cup Press accurately aligns and presses 1 , 1-1/8 , 1-1/4 , and 1.5 headset cups. In addition, it presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed cup wrenches firmly in place when removing or installing adjustable-type bottom brackets. Features a quick-release design for fast tool installation and removal, extra long (30cm) handles for superior leverage, and stepped bushings for precise cup alignment.
Features a large work surface (91.5cm x 58.5cm) with specially sized slots, holes, and recesses and for holding tools, shop towels, lubes, beverages, etc. Folding steel legs provide a solid base for a toolbox and supplies.
Park Tool Portable Workbench PB-1Perfect for taking to races and rides, the PB-1 is a workbench that folds for easy transport and storage. Features a large work surface (91.5cm x 58.5cm) with specially sized slots, holes, and recesses and for holding tools, shop towels, lubes, beverages, etc. Folding steel legs provide a solid base for a toolbox and supplies. Park Tool Portable Workbench Content:Dimensions: Folded- 108cm x 58.5cm x 18cm Set up- 91.5cm x 58.5cm x 82.5cm Heavy duty steel legs provide a rock solid base for heavy tools and supplies Folded dimensions: 42.5 x 23 x 7 inches (108 x 58.5 x 18cm) Optional accessories include PB5 hand truck and DPB7 repair stand and wheel truing standBuy Park Tool Portable Workbench from Chain Reaction Cycles, the World's Largest Online Bike Store.
This tool set is designed to fully service DT Swiss hubs and other hub manufacturers that utilize DT Swiss hub internals. The set includes all the bearing guide sizes for front and rear hubs, two low-drag silicone freehub seals and a high-quality, ratchet removal tool.
Key Features:Ideal for repairing and saving damaged threads high-end cranks.Includes one set of tap & five helicoil threads in 9/16”x24TPI for right crank arms, as the left crank arms.With one ergonomic handle to use with tap to enlarge the stripped pedal threads on damaged crank arms.One handle with comfortable rubber grip to install the helicoils threads onto the crank arms.One brush for cleaning.One bottle of cutting fluid (2oz. / 60ml.) .
Key Features:The #752 is used to ream BB30 bottom bracket shells to an ID of 41.94 mm.,Must be used with the HTR-1 Head Tube Reaming and Facing Set with a QK750 Centring Cone Adaptor,
Optional add on for TS-2.2 and TS 2 truing stand to offer incredible accuracy for building and truing wheelsMeasures a wheel's lateral and radial run-out to .01 mmMounts easily to any TS-2 or TS-2.2 Truing StandEnables user to set and follow tolerances for each wheelIncludes two dials mounting brackets and specially designed tips
Key Features: A perfect way to start a bicycle tool collection!,A great combination of tools to help a home mechanic clean, adjust, maintain, and do some basic repairs on their bike,The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks, and includes a custom Park Tool toolbox with extra room for spare parts and more tools .
Key Features: Introducing the PCS-12.2, a bench-mounted version of our popular PCS-10.2 Deluxe Home Mechanic Repair Stand, Features our world-famous cam-actuated micro adjust clamp design, which securely holds bicycles in place while allowing quick installation and removal, Cam actuated, micro adjustable clamp allows quick entry and exit and fits 1" to 3" (25mmÔÇô76mm) diameter tubes and seat posts of any shape and material, Narrow clamping jaws (2.7"/7cm) fit into tight areas or on short seat posts, 360° infinite clamp rotation allows bike to be placed in optimal position for specific repairs, All steel structure for maximum stiffness and durability, Super strong glass-filled nylon composite fittings and top tube internals enable smooth rotation and secure positioning, Mounts to any flat surface (mounting bolts not included), Weight Limit: The PCS-12.2 Home Mechanic Bench Mount Repair Stand has an 80 lb. (36kg) weight limit, provided the stand is securely mounted with appropriate fasteners to a solid and secure bench surface, The user is responsible for making sure the workbench and the fasteners are capable of handling this amount of weight..