When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
Thread the nut onto the TNS, insert into the fork stack, and tap it in with a hammer. Sets the starfangled nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers.
Simple and effective, this chainring has no ramps or pins to throw the chain and the narrow wide tooth profile holds the chain in place virtually eliminating dropped chains.
The Park Tool DH-1 works with all derailleurs and 1/8" chains. The unique design allows the bike to be shifted and works with open dropout and thru-axle frames up to 12mm.
Mounts on any tube with the QuickClip system.
Park Tool Dummy Hub - DH-1This Dummy Hub from Park Tool allows you to remove your rear wheel so you can enjoy easy access to clean your bike chain. Unique and Easy-To-FitThe Dummy Hub, also known as a sleeping hub, will work with all 1/8" and derailleur chains and is designed to allow you full access to your chain for cleaning and scrubbing. It easily slides into your rear dropout, clipping securely in place to keep the shape of your chain, which also makes it ideal for transporting without the hassle of having to completely break down your bike. Working with thru axle frames up to 12mm and open dropout frames, the Park Tool Dummy Hub is an essential accessory for bike shops, home mechanics and casual riders.Features:Perfect for drivetrain cleaning or transportChain Compatibility: All 1/8" and Derailleur ChainsFrame Compatibility: Open Dropout and Thru-Axle (up to 12 mm)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: A bespoke pair of snap ring or circlip pliers designed to work with the fittings found on suspension and hydraulic systems,Forged for strength and durability and then dipped in Park blue vinyl for comfort and grip,1.3mm bent internal size,Covered by Park Tool's legendary lifetime warranty.
Part of a range of combination Headset wrenches that cover all bicycle requirementsThe Y-head design puts metal where it is needed for strength and durabilityThe laser-cut openings are a precise fit, as this operation takes place after the heat treatment processFeatures a 15 mm pedal wrench, and 32 mm wrench for 1 inch Headsets
Compatible with BB30 & PF30; 6805 (25 x 37 x 7mm) and 6806 (30 x 42 x 7mm) BB bearings.Specification:Material: Alloy steel.,Size: 280 x 38mm..
Fork seal driver tool is specially designed for dust seal installation on the suspension forks. The drivers are designed to use the forks bushing as a guide, eliminating crocked seal installation, and ensuring perfect fit of the seal. The tool is made from reinforced plastic and does not damage the seal or the fork housing during the installation. Available in different sizes, each of them corresponding to specific stanchion diameter, and is compatible with both flangeless and flanged seals, making them compatible with most modern forks.,Better compatibility is the biggest virtue of the newest version of this tool, but it also has laser engraved logos & spec, which will stay clearly visible for extended period of time..