Installing a new bottom bracket can give your bike a new lease of life after moulded seasons on the roads and trails. However, pressing the bearings into the frame incorrectly can damage both the bearings and the bottom bracket shell. The LifeLine Press Fit Bottom Bracket Press uses precision bushings to guide the bearings into the shell easily and accurately, helping you get the best from your frame and bottom bracket. Supplied with bushings to fit BB86, BB30 and BB90 press fit bottom bracket standards, theLifeLine Press Fit Bottom Bracket press is essential for any rider who builds and maintains their own bikes.
Easy to use and prevent brake rubbing issues. Set the correct clearance between the brake pads and the rotor. The two thin plates simulate the clearance between the brake pads and the rotor. Follow the simple steps below: 1) Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side. 2/ Insert the Caliper Alignment Tool between the pads and the rotor. 3) Pull the brake lever- focing the pads against the alignment tool and in turn against the rotor 4) While still holding on to the brake lever, tighten the bolts on the brake caliper. 5) Release the brake lever and remove the tool and your pads should now be centred to the rotor with an equal distance either side.
Simply find the relevant slot that matches the brand of rotor you're riding with. If the rotor slides into the slot, then it's worn and needs replacing. If the rotor doesn't fit in the slot, then you've still got enough material on the rotor to ensure effective braking. The tool has been precisely machined to ensure you get accurate results. The 2mm slot minimum thickness is a gauge for Tektro and TRP Ebike rotors. The 1.8mm slot minimum thickness is a gauge for Magura rotors. The 1.55mm slot minimum thickness is a gauge for SRAM rotors. The 1.5mm slot minimum thickness is a gauge for Shimano and Hope rotors.
This workshop-quality tool is ideal for fitting and removing threaded bottom bracket bearing cups.
This workshop-quality tool is ideal for fitting and removing threaded bottom bracket bearing cups.
This workshop-quality tool is ideal for fitting and removing threaded bottom bracket bearing cups.
Simply mount the speed sensor to the centre of the rear wheel hub and the cadence sensor to the inside of the crank arm. Wirelessly connect to devices such as your GPS computer, Iphone/ Android smartphone and record your speed and cadence data. Installation instructions are included in the images and a printout is included with the product.
The LifeLine Pro 2 in 1 Masterlink Pliers make spliting and reconnecting a bicycle chain easier than ever before. The left two prongs pince the chain together. Meanwhile the right two prongs split the chain with a simple squeeze.
The LifeLine Pro 3 Drawer Work Station comes with 2 shallow drawers and 1 deep. In addition, lift the lid and you'll find a tool tray and another large storage compartment. All the drawers are lined and the work station has a handy locking system with the closure of the lid preventing the drawers from opening- keeping your tools safe in transit. On the lid are two detachable compartment boxes for keeping all your small essential safe. (note the tools shown in the images are not included)
This workshop-quality tool is ideal for fitting and removing threaded bottom bracket bearing cups.
Pro-quality bottom bracket cup removal tool from LifeLine.