Instructions for proper use: Unwind the handle to make room for the chain to be fitted to the tool Unwind the adjustable support screw at the rear of the tool Place the chain on the rear teeth of the tool (nearest the adjustable support) Tighten the adjusting support screw until it comes firmly into contact with the back of the chain Tighten the handle of the tool gently until the tool pin comes into contact with the centre of the chain pin If the two pins are not lined up, back off the handle and re-position the chain in the tool (repeat until the two pins are aligned) Now firmly tighten the handle to push the pin out, splitting the chain
The LifeLine Chainring Peg Spanner is an essential tool for any mechanic, home or professional.
The LifeLine Headset Cup Remover is simple to use and makes headset removal quick without damaging your frame. Instructions Start by securing your frame or bike in a workstand. Feed the closed end through the steerer tube until the splayed end opens inside the steerer tube. Make sure the splayed end of the tool is sat on the lip of the cup and hammer the cup out. When removing the tool follow the closed end down to protect the tool and repeat with the remaining cup. Tip: when hammering the cup out use a rag to catch the cup instead of sending it across the room.
The LifeLine Pro Long Nose Pliers combine serrated jaws for gripping and cutting edge perfect for crimping cable ands and cutting cable ties. The insulated rubber handles improve grip and make them both comfortable and safe to use. If you're looking to increase your tool collection these should be next on the list.
Essential tool for any ride.
With the ability to fit a wide range of wheel sizes and widths the LifeLine Pro Mechanic Wheel Truing Stand allows high truing accuracy whilst being easy to use. The LifeLine Pro Mechanic Wheel Truing Stand uses a spring loaded caliper to prevent the guides from sticking to the wheel, whilst being adjusted by ergonomic knobs.
Instructions for proper use: Unwind the handle to make room for the chain to be fitted to the tool Unwind the adjustable support screw at the rear of the tool Place the chain on the rear teeth of the tool (nearest the adjustable support) Tighten the adjusting support screw until it comes firmly into contact with the back of the chain Tighten the handle of the tool gently until the tool pin comes into contact with the centre of the chain pin If the two pins are not lined up, back off the handle and re-position the chain in the tool (repeat until the two pins are aligned) Now firmly tighten the handle to push the pin out, splitting the chain
They feature a flush and diagonal outside cutting edge, which allows you to easily and accurately trim tyres or cut cable ties flush; even in the most awkward of locations. The high leverage handle design helps to make light work of repetitive jobs such as when cutting down and shaping a spike tyre for that crucial race run.
Chains wear over a period of use and can lead to poor quality of gear shifting and the potential for the chain to brake whilst in use. The industry standard for chain replacement is when the chain wear is between 0.75% and 1.0%. Simply place one end into a link on your chain and if the 0.75% side fits in your chain will soon need replacing, if the 1.0% side fits in replace your chain immediately.
Put an end to snapped tyre levers and sore thumbs. Installing tyres can sometimes be a struggle, even after pushing the tyre beads into the centre of the rim and working the bead with a tyre lever, some rim/tyre combinations just won’t budge. The LifeLine Tyre fitting tool makes light work of tight tyre beads; simply position the slotted jaw onto the opposing rim and place the hook under the stubborn bead, then roll the bead over the rim into place.
The LifeLine 18 in 1 Multi-Tool with Co2 Inflator features the following tools: - Chain Tool with Retaining Hooks to secure the chain as you split or repair it - Press- on Co2 Inflator, compatible with presta and schrader valves - 2/4/5/6/8MM Hex Keys - Phillips and Flat head screwdrivers - Torx T25 and T30 Tools - 10MM Open Wrench - 3.23/ 3.33/ 3.45/ 3.96 Spoke Wrenches - Mavic® compatible Spoke Wrench
The LifeLine Pro Cutting Nippers feature induction hardened edges to create a long lasting high quality tool. The rubber handles are insulated for comfort, safety and grip. If you want to grow your tool box the LifeLine Pro Cutting Nippers are perfect addition.