Pin Tool for Remove/Replace Lefty Cap on Cannondale Lefty Hubs.
This tool set is designed to fully service DT Swiss hubs and other hub manufacturers that utilize DT Swiss hub internals. The set includes all the bearing guide sizes for front and rear hubs, two low-drag silicone freehub seals and a high-quality, ratchet removal tool.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
This product allows for the precise adjustment of the three axis which are important when installing cleats: fore/aft position, the stance (Q-Factor), and foot angle. While pedalling, leg power is transformed over your feet into propulsion. Therefore, the right position of the feet is of the utmost importance, as it determines performance and comfort. The Ergon TP1 is a serious piece of kit that won't let you down when you need it most.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.