Tool for removing the bearing from the crank spindle on Campagnolo cranks.
Park Tool Adjustable Crown Race Puller CRP-2The CRP-2 from Park Tool is a highly-precise workshop tool for the accurate, simple and safe removal of fork crown races. This fully adjustable and easy to use tool allows for accurate adjustment of the individual blades, which are positioned around the edges of the crown race, once set tight, the crown race can be pulled off efficiently without any risk of damaging the fork. This tool is very versatile and fits around most possible interferences caused by fork top caps and crown protrusions.Features: Material: Steel Compatible Steerer Diameter: 1", 1-1/8", 1-1/4", 1.5 forks - Suspension and Rigid Compatible Steerer Tube Length: 14 to 43cm (5.5 to 17 inches)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool PRS4W - Deluxe wall-mount repair stand with 100-3D clampTop quality wall Mounted Repair Stand
Park Tool Deluxe Wall Mount Repair Stand PRS-4W-2Simple to mount on to posts or walls, the PRS-4W-2 Repair Stand benefits from Park Tool’s renowned quality and easy to use design. Once your bike is held in the clamp, this advanced bike work stand has a rotatable design, so you can position the bike at any angle for accessing hard to reach areas. Ready for frame sizes up to 76mm (3”) in diameter and aero shaped frames, the clamping pressure of the quick release clamp can be carefully adjusted to prevent damage to expensive carbon frames and seatposts. Features: Material: Steel with powder coat finish Clamp Type: 100-3D Grips nearly any tube from 23-76mm (7/8" - 3"), including aero tubes Cam-actuated adjustment system for quick entry, adjustment and exit Fully adjustable clamping pressure prevents damage to thin-walled tubes Narrow clamping jaws (7cm / 2.7") designed to clamp securely yet fit into tight areas or on short seat posts Durable replaceable clamp covers (#1960) Wall mount extends 14cm (5-1/2") from mounting surface, centre of clamp sits 33cm (13") from mounting surface when installed Mounting bolts not included Weight Limit: 45kg / 100lbs Wall Mounting Plate Size: 15x6cm (6" x 2.5") Mounting Hole Sizes: 13mm (0.5") in diameter and 100mm (4") apartManufacturer's Part Number: QKPRS4W2 Weight: 4.5kg (10lbs)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
With a powder coat finish, the The Park Tool wall mount repair stand is designed to be fitted easily to any post or wall stud, and places the clamp approximately 13 inches from the wall. Note: Mounting bolts not included.
Specification: Functions: 20 pieces.,Size: 46 x 28 x 8cm.,Weight: 4.35 kg.,. Contains: Torx Key Set:T10 / T15 / T20 / T25 / T27 / T30 / T40,Hex Key Set: 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 8 / 10mm,Chain Wear Indicator:0.5% / 0.75% / 1%, Patch Kit,Tyre Lever Set ,Shimano Cartridge B.B. Tool ,Shimano HG Cassette:Fits Shimano® & SRAM®,Shimano MF Freewheel ,Universal Crank Puller:For ISIS Drive® & Octalink® crank arms,Cable Cutter ,Hollowtech ll BB Socket:For 16 external notches Ø44mm Also fits rotor lockrings and Shimano BB Tool Adaptors TL-FC24 & TL-FC25.,Socket Wrench:For 1/2" Drive hex bit sockets,Crank Arm Installation Tool 8-notch Hollowtech:And 16mm internal hex SRAM® crank caps.,Spoke Wrench:12 / 13 / 14 / 15G / Shimano® 4.3 / 4.4,Chain Rivet Extractor:5-12 speed, 1/8" and 3/32", single speed chains,Pedal Wrench:15mm,Chain Whip:7-12 speed,Flathead Screwdriver:5.5,Crosshead Screwdriver:#2,Combination Wrench:8/10mm.
Designed to cut new threads on fork steerers, or clean up existing threadsExpandable cutting dies are made from the highest quality high speed steel, to ensure a precision cut and a long lifeThe thread guide system allows the metal shavings produced to fall through the guide, preventing damage to the threadsIncludes a 1 inch x 24 tpi cutting die, and a 1 inch cutting guide1-1/8 inch x 26 die, 1-1/4 inch x 26 die, 1-1/8 inch guide, and 1-1/4 inch guide are also available, and will fit the same handle
A workshop quality repair stand for mounting onto a wall.Key Features:Uses the same 100-3C heavy duty adjustable clamp as the PRS-2OS1 and PRS-3 OS1 deluxe oversize workshop stands.Heavy duty adjustable linkage clamp fits frame tubes up to 1-5/8inches (41 mm).Designed to be wall mounted>Clamp rotates 360 degrees.Mounts easily to any flat surface.Mounting bolts not included.Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repairIt features 18 (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing,The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability,The PCS-9.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.*,The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion,The PCS-9.3 is the perfect way to upgrade your home shop !, The new PCS-9.3 features: Fully adjustable clamp fits 7/8 to 3 (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts, Narrow clamping jaws (2.7/70mm) fit into tight areas or on short seat posts, Durable textured powder coat finish, Maximum weight capacity: 80lbs. (36kg), Height adjustable from 39 to 57 (990mm - 1450mm), Base when open forms a triangle of 36 x 36 x 48 (920mm x 920mm x 1210mm), Folds down to 44 x 14.5 (1140mm x 370mm), Weight: 16lbs. (7.2kg), QK2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray, Note :The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs, .
Adaptor for the Park CRC-1 that allows the quick and perfect facing of 1.5' / 39.8 mm standard crown racesDesigned for use on tapered steerer forksGrub screws lock adaptor and cutter in place for easy useIncludes precision ground crown race cutterFor best results use plenty of Park CF-2 cutting fluid
A full-featured bicycle workstand designed and built for the home mechanicThe PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment,Featuring 18 (460mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing,The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability,The PCS-10.3 is able to hold up to 80lbs. (36kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.*,The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach,Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion,The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair, The new PCS-10.3 features: Cam-actuated micro-adjustable clamp fits 7/8 to 3 (22mm - 76mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts, Narrow clamping jaws (2.7/70mm) fit into tight areas or on short seat posts, Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage, Durable, textured powder coat finish, Integrated height-adjustable parts tray, Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), Maximum weight capacity*: 80lbs. (36kg), Height adjustable from 39 to 57 (990mm - 1450mm) using convenient quick-release lever, Base when open forms a triangle of 36 x 36 x 48 (920mm x 920mm x 1210mm) ,Folds down to 45 x 14.5 (1140mm x 370mm), Weight: 16lbs. (7.2kg), Note :The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs,.
The Fairdale Lookfar 700c Bike makes cruising and commuting easy, it makes those mundane commutes fun and brings back the joy or riding a bike. Built for ease-of-use the Lookfar has 8 gears that can be switched through by one thumb shifter, wide reliable tyres are fast on the road and big enough to handle rougher terrain. The Lookfar boasts a durable steel frame that shares it's geometry with Fairdale's Weekender model, that's known for its all day comfort. It's loaded with high-quality parts like the FSA Tempo 1x Crankset, an FSA Sealed Integrated headset, Continental Ride Tour 700c tyres and Odyssey's Twisted PC pedals. ###section### Product Specs FRAME MATERIAL: 1020 Steel WHEEL SIZE: 29" TOP TUBE LENGTH: 575mm-606mm CHAIN STAY LENGTH: 440mm HEADTUBE ANGLE: 73° SEAT TUBE ANGLE: 71° FORKS: 1020 Steel, 1 1/8” BARS: Fairdale Archer v3, Aluminum STEM: 70mm, Forged Aluminum HEADSET: FSA, Sealed Integrated, 45º/45º BRAKE MOUNTS: Caliper BRAKES: Aluminum, Dual Pivot, 55-75mm reach w/Quick Rels FRONT HUB: 36H, 3/8” Axle, Aluminum Shell, Looseball FRONT RIM: 700c, 36-Hole, Schrader Valve, Aluminum REAR HUB: 36H, 3/8” Axle, 8-Speed, Aluminum Shell, Looseball REAR RIM: 700c, 36-Hole, Schrader Valve, Aluminum TYRES: Continental Tour Ride, 700c x 42mm SPROCKET: 42t CRANKS: FSA Tempo 1X (S=165mm, M=170mm, L/XL=175mm) BB: FSA PEDALS: Odyssey Twisted PC SEAT: Fairdale GEARING: 8 speed WEIGHT: TBC ###section### Product Highlights Larger Wheels for that road bike performance with a BMX feel Larger wheels allow for a more comfortable ride without sacrificing too much of that BMX feel High-quality aftermarket tires Great for cruising Responsive brakes