Wolf Tooth Limited Edition Remote Dropper LeverUtilising sealed cartridge bearings for a silky-smooth action and a low profile, this textured lever is machined to the highest quality. Compatible with all cable-actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Features: Use: MTB Dropper Post Compatibility: All cable-actuated dropper posts (see compatibility for more info) Clamp Diameter: 22.2mmTechnologies: Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Compatibility: Compatible with all cable actuated dropper posts. Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. Manufacturer's Part Numbers: WTREMOTECLMPBLU Blue Blue One Size 22.2mm WTREMOTECLMPPRP Purple Purple One Size 22.2mm WTREMOTECLMPRED Red Red One Size 22.2mm WTREMOTECLMPNI Silver Nickel One Size 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Magura Light Action Remote Dropper LeverThis Light Action dropper seatpost lever is engineered to solve common dropper remote problems with its ergonomic, compact and sturdy design. This Light Action version aims to solve common dropper remote complaints with its compact, ergonomic and sturdy design. The ReMote Light Action Dropper Lever has a longer lever arm than the standard ReMote, reducing the actuation force required by a third and making it ideal for dropper posts with a harder pull or if you prefer a light actuation feel. This dropper seatpost lever is another option in Wolf Tooth's industry-leading ReMote line of dropper remotes. Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers.Sealed Cartridge BearingIn an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with a captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Lightweight with Hassle-free InstallationWolf Tooth's team has also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice for those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to the engineered failure point, the lightweight ReMote leads in every category.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Clamp Type: Magura Clamp Included: Yes Ergonomic Easy to Install Sealed cartridge bearings Textured lever Made in USATechnologies: UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Number: WTREMOTELAMAGURABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Magura MTB Remote Clamp Conversion KitBy attaching your dropper remote to your Magura brakes, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. This model is specifically designed for use with Magura brakes.Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Magura Brake conversion kit is for Magura brakes but is compatible with some 2-bolt SRAM brakes as well. Features: Material: Delrin and Aluminium Compatibility: Magura brakes Part Number: WTMAGCONVKITBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Magura Remote Dropper LeverThis dropper seatpost lever is developed for use with Magura brakes. Thanks to its robust 6061 T6 aluminium construction, it's tough and reliable as you tackle demanding mountain terrain conditions. Ergonomic and easy to install, this dropper lever makes it easy to change your seatpost positioning without having to stop your ride. Its sealed cartridge bearings and textured lever also make it a perfect choice for smooth and consistent operation in all weather and terrain conditions.Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Clamp Type: Magura Clamp Included: Yes Ergonomic Easy to Install Sealed cartridge bearings Textured lever Made in USATechnologies: UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Number: WTREMOTEMAGURABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This dropper post lever is specifically designed for use with Magura brakes. It features a hard-wearing 6061 T6 aluminium construction, which makes it tough and dependable as you charge from trail to trail. Ergonomic and easy to install, this dropper lever makes it easy to change your seatpost positioning without having to stop your ride. Its sealed cartridge bearings and textured lever also make it a perfect choice for smooth and consistent operation in all weather and terrain conditions. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category. Technologies: UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTEMAGURA
The Wolf Tooth Pack Pliers are not only a brilliant exercise in design innovation but are precision engineered to an unrivalled standard – at once durable, functional and reliable, these are a must-have addition to your kit list if you’re touring, bikepacking or exploring untrammelled trails with a lightweight setup.Explicitly designed to fill existing gaps in the lightweight multi-tool market, these pack pliers function as a tyre lever, presta valve core remover, valve stem lock nut wrench and master link pliers.With the in-built storage space, you can carry two additional master links. Magnetised for simple closure and remarkably lean, you’ll be glad to have these out on the trails or in the wilds.Key Features:Handcrafted from 7075-T6 aluminium in the USA,Tyre lever, presta valve core remover, valve stem lock nut wrench and master link pliers,Weighs 38.5g.Compatibility:Compatible with 9, 10, 11, 12-speed master links and chains,Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links,Not compatible with Connex Links by Wipperman,Tyre lever not recommended for use on carbon rims.
Stay hydrated and ride. These bottles are made and printed in the USA.Easy to open, effortless to use, and leak-proof when closed. Key Features: 22oz / 26oz capacity,BPA free and dishwasher friendly.
Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.,Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.,Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required..
Wolf Tooth Pack Hanger Alignment Tool KitThis thru-axle kit is specifically designed to work on 12mm thru-axle and 5mm quick release bikes. Using this handy tool kit, alignment fixes are quick and intuitive as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This tool is suitable for use on 12mm thru-axle and 5mm quick release bikes. And for simple and durable storage, the components of this tool also nest inside of the handle.- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.Features: Material: 7075-T6 Aluminium, 6061-T6 Aluminium and 303 Stainless Steel Use: MTBIncludes: Thru Axle and Quick Release KitCompatibility: Works on 12mm thru axle and 5mm quick release bikesMade in the USAWeight: 324gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Pack Hanger Thru Axle Alignment ToolThis thru-axle kit is specifically designed to work on 12mm thru-axle bikes. Using this handy thru-axle tool, alignment fixes are quick and intuitive as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. And for simple and durable storage, the components of this tool also nest inside of the handle.- Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle.- Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing.- Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required.Features: Material: 7075-T6 Aluminium, 6061-T6 Aluminium and 303 Stainless SteelType: Thru Axle Kit - Works on 12mm thru axle bikesMade in the USAWeight: 297gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Pack PliersThese pliers work as a multi-tool that serves as a tyre lever, Presta valve core remover, valve stem lock nut wrench and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self closes the tool.Compatibility:- Pliers work with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains).- Master Link storge is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman). Tyre lever not recommended for use on carbon rims.Features: Material: 7075-T6 AluminiumMaster Link/Chain Compatibility: 9, 10, 11 and 12 speed master links and chains (not compatible with Campagnolo 12 speed chains)Size: 116x20x9mmMaster links are not includedMade in the USAWeight: 38.5gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Pack PliersThese pliers work as a multi-tool that serves as a tyre lever, Presta valve core remover, valve stem lock nut wrench and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self closes the tool.Compatibility:- Pliers work with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains).- Master Link storge is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman). Tyre lever not recommended for use on carbon rims.Features: Material: 7075-T6 AluminiumMaster Link/Chain Compatibility: 9, 10, 11 and 12 speed master links and chains (not compatible with Campagnolo 12 speed chains)Size: 116x20x9mmMaster links are not includedMade in the USAWeight: 38.5gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.