Key Features:Use with the Elite My Etraining App to transform a compatible Elite turbo trainer into a digital trainer with your ANT or Bluetooth Smart enabled device as a headunit.,Please ensure your chosen device is ANT or Bluetooth Smart enabled before purchasing..
The DynaPlugger is a simple, rugged, rad way to repair your tubeless tyre. Just find the puncture, align the tool, push into puncture, pull out and the plug stays in place. Now you're ready to get back to shredding! The DynaPlugger is a fast, dependable and lightweight tubeless repair kit, never leave home without it!No need to remove the tyre, no messy glues or solvents, just plug and rideIf a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there!A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationWhen not in use, the DynaPlugger is a pack-friendly 127 mm long and weighs just 34 grams, less than an energy gelPush fit cap ensures fast deployment when required and a spare pre-loaded insertion tube can be kept in the handleKit includes the durable glass-filled nylon tool, 4 x soft nose plugs, 2 stainless steel insertion tubes and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageDynaPlug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the insertion tube straight into the hole and extract the tool, depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the non-abrasive brass tip will not scratch your rim or puncture your rim tape. DynaPlugger is a moulded of Glass-Filled Nylon. Even though it weighs only 35 grams, this tool is extremely strong. The push-on silicone end cap can store an extra insertion tube and seals the interior storage compartment.
Effetto Mariposa Cog BrushThe Cog Brush from Effetto Mariposa is a durable and easy to use cassette cleaning brush that is designed with two sets of bristles for deep cleaning your cassette sprockets. Its first brush features lateral bristles, with shorter and denser bristles that is ideal for cleaning chain, chainring and cogs. At the tip of the brush handle are longer and harder bristles that are ideal to reach the dirt deeper in the cassette between the sprockets.This brush, equipped with sturdy nylon bristles, is designed for cleaning chain, chainrings and cogs, removing dirt even inside the cassette.The Cog Brush is specifically designed to remove mud and dirt from chain and sprockets. It is equipped with two different sets of bristles. The lateral brush is more extended and with short and dense bristles - it is ideal for chain, chainrings and cogs. The brush at end of the tip is smaller but with longer and harder bristles - it reaches the dirt inside the cassette and the spaces between the sprockets.Functional and Comfortable HandleThe curved and thin handle can be slipped between the cogs and act against the mud deposited in the cassette (up to 10 speeds), thanks to the teeth in the lower part.Durable and Made to LastCog Brush is made of nylon, shockproof and resistant to solvents. Features: Specifically designed to remove mud and dirt from chain and sprockets Equipped with two sets of bristles: lateral, with shorter and denser bristles, for chain, chainring and cogs; at the tip, with longer and harder bristles, to reach the dirt in the cassette The curved and thin handle can be slipped between the cogs and act against the mud deposited in the cassette (up to 10 speeds), thanks to the teeth in the lower part Made of nylon, shockproof and resistant to solventsBuy Effetto Mariposa Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Seeker pedal was born out of desire and need. Eclat PRO riders like Devon Smillie and Shane Weston asked for a pedal with a larger platform than most, but with a slightly thinner profile. By using regular unsealed bearings you are limited
The Street Tool is the Swiss-Army knife for your BMX. All the functions of the tool are hidden inside the anodized tube. Throw it in your bag and make sure you don’t lend it to anyone, as you’ll never get it back!
Description for Eclat Maverick Assembling And Removal Tool not available
This superb model is specifically designed to fit SRS+ chain guides. Additionally, it is a genuine E Thirteen replacement part.
The Ratchet LN upgrade kit enables the conversion of DT Swiss 3-pawl hubs to the renowned DT Ratchet freehub system. Key Features: Pawl freehub systems create relatively small engagement surfaces, which result in higher stress on the contact area. The Ratchet System is extremely reliable due to the simultaneous engagement of the ratchet faces, distributing the force evenly over a large area, In addition, the Ratchet System is modular, so the engagement angle can be increased by replacing the included 18 tooth ratchets with 36 or 54 tooth units (sold separately), DT are the original ratchet hub innovators, with over 25 years of development and refinement behind it no other manufacturer has matched DT's system for ease of service, reliability and durability, Tool-free servicing concept make maintenance quick and simple, even mid-ride in a pinch, LN system is specific to 370 hubs such as those found on 1900 series DT complete wheels, the LN freehubs are not compatible with standard Ratchet or Ratchet EXP hubs.
Ring Nut tool required for removing and replacing inner bearings of the 240 / 240s / FR rear hubs which are located behind the internal ring nutSimple to use and fits into a vice for workshop use
The DMR V8 / V8 mag pedal service tool is designed to easily remove and fit bearings into your pedals.
The Deda Tool Zip Case is an elegant and useful bag to keep all your spares. Ideal for the shorter rides when only one bottle is needed, this fits neatly into your bottle cage. A waterproof solution to holding your keys, phone or general spares like tyre levers, co2 cartridges and tubes.Material: EVA,Size: 73x67x210mm,Colour: Carbon look.
Several bike frame models are compatible with the Deda Elementi DCR system (Deda internal cable routing), but for some brands, there are specific adaptors available that have been developed for a perfect fit. With several options available to choose from to match your set-up, this top cover adaptor is specifically designed for use with the Deda Elementi Alanera with Deda Internal Cable Routing (DCR) system. Compatibility The Trek option is designed to fit Madone and Emonda models. The Ridley option is designed to fit Noah Fast, Kanzo Fast, Fenix and Eddy Merckx 525 models. The Colnago option is designed to fit C64, Concept and V3RS models. Manufacturer's Part Numbers: DWS40E Black Trek DWS40G Black Ridley DWS40B Black Colnago