Key Features:Machined from 7075-t6 aluminium in Minneapolis, USA.,Includes the wrench only. Steel inserts are not included but can be purchased separately or as a set.,1-inch hex drive interface compatible – inset magnets enable quick coupling and decoupling of steel inserts.,16-notch 44 mm bottom bracket tool (or centerlock rotor tool) compatible,Weight - 88g.
Mounts under Ninja water bottle cage with interchangeable Cage Mount or use alone with Frame Mount. This weatherproof tool box contains a 30 function tubeless tire repair mini tool for road or trailside repair and maintenance. * The chain tool is compatible with single and multi-speed chains up to 12 speed NOT including Campagnolo® hollow pin chains. . Tools • 2L / 2.5 / 3 / 4 / 5 / 6 / 8 mm Allen wrenches • 10 mm hex socket • T10 / T15 / T25 Torx® wrenches • 14G / 15G • Mavic M7 • Shimano® 4.5mm spoke wrenches • CrMo steel chain tool* • Chain hook • CrMo master link pliers • #2 Phillips / flat head screw drivers • Tire reamer plug insertion tool • Serrated knife / saw • Disc insertion spacer TOOL MATERIAL Chrome vanadium steel TOOL BODY MATERIAL Forged aluminum Mount Mount to Ninja Master+ series Cages with included Cage Mount Install on frame stem seatpost or water bottle boss with included Frame Mount and zip ties ADDED FEATURES Knife blade & plug insertion tool lock extendable for leverage secondary chain link fence chain pin breaker and master link storage compartment WEIGHT 169g / 5.96 oz (Mini PT30) 55 g / 1.94 oz (ToolBox)
Two-part tool set for correctly adjusting SPD pedal cone lock nutsOne socket holds the adjusting cone and the other tightens or loosens the locknut
For installation of HOLLOWTECH II press-fit bottom bracket. USP Compatible with up to 107 mm bottom bracket shell width Hardened steel for rigidity and durability REMARK 10 mm longer axle than Y13098250
A quick and easy way to remove bearings from press fit type bottom brackets with an inside diameter of 37-41 mm (BB90 BB92 Shimano Press Fit SRAM Press Fit GXP)The BBT-90 works similar to a small head cup remover to safely extract low profile bearings from inside the bottom bracket shell as the tool slides through the shell it expands behind the bearing once the tool is in place the bearing is removed by tapping on the top cap with a hammer such as the Park HMR-3The BBT-90.3 set also includes installation cups to be used in conjunction with the Park Tool HHP-1 2 or 3 Headset Cup Press to quickly and precisely press the bearings into the bottom bracket shell
Replacement ANT+ heart rate sensor for CatEye Padrone Digital, Padrone Smart, Padrone Smart+ and Strada Smart computers. Includes elasticated, adjustable sensor strap.This Bluetooth sensor can be used with BLE-enabled smartphone cycling apps including Cateye Cycling.
A commonly used and required mechanics aid, this set of Park Tool sockets is made of shop-grade, tough chrome vanadium steel and is chrome plated for added longevity and durability. With each socket featuring a 3/8" drive, they are brilliantly compatible with Park Tool's Torque Wrenches to help you get the best leverage and grip when loosening and tightening your fitting. The set of six sockets range from 24mm to 32mm, letting you work on a variety of fitting sizes, ideal for whatever job you need to take on. The Flat Faced Socket Set SKT-6 is an essential collection of sockets that no mechanic or tinkerer should be without.
Park Tool Flat Faced Socket Set (SKT-6) When it comes to maintaining and tuning your suspension for optimum performance, not only do you require the correct tools, but you need them to offer as precise a fit as possible. The Flat Faced Socket Set SKT-6 provides just that. Shop Quality Precision Sockets These sockets will work with most suspension fork fittings, making them a universally handy tool to have and are perfect for using with park Tool's Torque Wrenches for maximum compatibility. Durable and designed for regular use, the sockets are forged from chrome vanadium steel and are chrome plated to give additional toughness and longevity. Each socket is a 3/8" drive and range from 24mm to 32mm to allow you to work on a number of different sized fittings. The Flat Faced Socket Set SKT-6 is a great addition to any mechanic's toolbox or home workbench. Features: Material: Tough Chrome Vanadium Steel + Chrome Plated Included Sockets: 6 - 24 mm, 26 mm, 27 mm, 28 mm, 30 mm, 32 mm (27 mm is tapered for improved use on Suntour suspension forks) Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth - Precision Is Integrated Standard HeadsetAny Frame That Uses Is (Integrated Standard) Headsets With 41mm Upper And 52mm Lower Outer Bearing Diameter,Uppers And Lowers Sold Separately,Enduro Stainless Steel Sealed Bearings Included On Both The Upper And Lower,.Upper Assembly Features:Ultralight Stem Cap With Integrated Spacer Plus An Aluminium Bolt And A Star Nut,7, 15 And 25mm Stack Height Top Cover Options (7mm Cover = 8mm Total Stack, 15mm Cover = 15mm Total Stack, 25mm Cover = 25mm Total Stack,O-ring Seal Prevents Water Intrusion Around The Steerer Tube,Custom Moulded Upper Lip Seal Provides Additional Protection For The Upper Bearing,.Lower Assembly Features:Custom Moulded Dual Lip Seal On The Crown Race To Protect The Lower Bearing In The Toughest Conditions.
The Wolf Tooth Direct Mount Chainring for Race Face Cinch is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Race Face Cinch cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:Any Race Face Cinch™ system crankset.,Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability,Both standard (142mm rear hub spacing) and Boost (148mm hub spacing) offsets available. ,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline: Standard Offset 49mm for 26-34t, 51mm for 36t (additional chainstay clearance),Chainline: Boost Offset 52mm .
Key Features:Compatible with a wide range of road, gravel and cyclocross bikes,If your rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle, you will need to use the inline version which is also available. This is because the tanpan barrel adjuster end sits too close to the frame for the internally routed cable to exit the frame and enter the tanpan barrel adjuster..
The Park Tool QTH-1 Quick Change Bit Driver Set is an ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on the majority of bikes.Ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on bikesThe magnetic quick-change handle allows for one-handed operation and makes changing bits quick and easyThe bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box, or can be permanently mounted to any wall or tool board and also includes empty spaces for 2 extra bitsIncludes the following magnetic 1/4" bits - 2mm, 2.5mm, 3mm, 4mm, 5mm & 6mm hex, T25 Torx compatible and #2 Philips cross tipThe QTH-1 is a professional-grade tool built to withstand the rigours of daily shop use, and is fully rebuildableThe magnetic "quick-change" handle allows for one-handed operation and makes changing bits quick and easy. The bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box, or can be permanently mounted to any wall or tool board. The QTH-1 is a professional-grade tool built to withstand the rigors of daily shop use, and is fully rebuildable.