Key Features: Fills gaps and helps retain non-threaded parts like press fit bottom bracket parts, sealed bearings, etc,Competes with Loctite® 290,10ml bottle,Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fibre surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
Key Features: Cleans bicycle chain quickly, easily, and effectively without the hassle and mess of removing the chain from the bike, The Cyclone™ uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts, Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes, The handle can be mounted on either side allowing the CM-5.3 to be used easily with e-bikes, Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain, Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess, Sturdy handle makes the Cyclone™ easy to use and control, Holds 2 fluid ounces (59ml) of solve.
The Wolf Tooth Wolf Axle Cap For 12mm Rear Thru-axles Not Only Protects Your Cherished Frames From Rock Scrapes, Scratches And Tough Terrain But Adds A Flicker Of Anodised Colour.Inexpensive To Replace And Fitting Into A Dedicated Recess In The Wolf Tooth Rear Thru-axle This Is A Nifty Addition To Your Ride.Simply Install And Remove With An 8mm Hex Key.
The Wolf Tooth Aluminium Single Speed Cog utilises extra tall teeth for reliable chain retention when using a chain tensioner. Fitting perfectly onto any Shimano freehub, this cog is optimised for 9, 10 or 11-speed chains but will work with all chains.Machined in-house at Wolf Tooth's Minnesota HQ from high-grade 7075-T6 aluminium in a variety of vivid colours, this is a great way to add some flair to your beloved single speed.Compatibility:These will fit on any Shimano-type freehub spline (geared or single speed),Designed to work with any chain,Tooth width optimized for 9-,10-, and 11-speed chains.
We designed these bolts to be the best on the market. These single chainring optimized bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut so no spanner is needed. These are 6 mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs.Compatibility:Any Wolf Tooth bolt-on Drop-Stop® chainrings with through holes,Works with other brands single chainrings as well,.Complementing products:Wolf Tooth Drop-Stop chainrings,GCX and GC cassette expanders,.Tech Specs:Designed and manufactured in Minneapolis, MN USA,7-8 NM tightening torque with light grease on threads only,Material: 7075-T6 aluminum,Size: M8 x.75 x 5,Weight: 4 bolts - 8 grams.
Key Features:Any Race Face Cinch™ System Crankset.,Compatible With Shimano 12-speed Hyperglide+ Chains.
The Wolf Tooth Razer Grips are made from lightweight, low-profile silicone foam – primed for longer adventures and available in striking colourways. Built for those of us who prefer thinner grips and providing a solid alternative to more traditional grips, these are a must-have for your MTB adventures.5mm thick foam gives you balanced comfort whilst the silicone foam maintains just the right level of softness and vibration absorption out on the trails. The tacky texture of the Razer grips makes them perfectly suited to anything from blazing sunshine to torrential rain. Key Features:30mm Installed Diameter Including Handlebar Diameter,100% Proprietary Dual-density Silicone Compound Provides Excellent Vibration Damping And Conforms To Your Hand For Improved Comfort While Maintaining Durability,Tacky Texture Provides Excellent Grip With Or Without Gloves In All Weather Conditions,Includes Bar End Plugs.
The Wolf Tooth Fat Paw Cam Grips are made from super-thick silicone foam – phenomenally comfortable in all-weather conditions, ergonomic and available in striking colourways. Built for larger hands and providing a solid alternative to more traditional grips, these are a must-have for your MTB adventures. 9.5mm thick foam gives you unbeatable comfort whilst the silicone foam maintains just the right level of softness and vibration absorption out on the trails – with the addition of the contoured Cam shape, these are unbeatable for on-trail comfort. The tacky texture of the Fat Paw grips makes them perfectly suited to anything from blazing sunshine to torrential rain.Key Features:36mm Installed Diameter Including Handlebar Diameter,100% Proprietary Dual-density Silicone Compound Provides Excellent Vibration Damping And Conforms To Your Hand For Improved Comfort While Maintaining Durability,Tacky Texture Provides Excellent Grip With Or Without Gloves In All Weather Conditions,Includes Bar End Plugs.
The Wolf Tooth Precision Headset Spacers Are Handcrafted In The USA From Premium-grade Anodised Aluminium. If You're Looking To Add Some Extra Vibrancy To Your Ride, Look No Further. This 5 Pack Comprises Of 5 Identical Spacers Of The Colour And Size Of Your Choice.Including Nifty Measurement Details On The Top Edges For Ease Of Set Up And Perfectly Paired With Wolf Tooth Precision Headsets, These Are A Must-have.Key Features:Handcrafted By Wolf Tooth In Minneapolis, USA,1 1/8" Top (Straight 1 1/8" Or 1 1/2" To 1 1/8" Taper) Steerer Tubes Only,6061-t6 Aluminium,Options: 3mm, 5mm, 10mm, 15mm, 20mm, 25mm, 30mm,5 X Identical Spacers Of Size And Colour Of Your Choice,Weight: 3mm - 2g , 5mm - 3g, 10mm - 5g, 15mm - 7g, 20mm - 9g, 25mm - 11g, 30mm - 13g.
Patented Drop-stop® Wide-narrow Tooth Profile For Minimised Dropped Chains,Perfect For 1x Setups,Machined In-house At Wolf Tooth's Hq In Minnesota, USA,.CompatibilityFour Of The Holes Are Threaded And One Is A Normal Through Bolt Hole (Done For Surly Compatibility). Use A Stock 10mm Chainring Bolt For The Fifth, Hidden Arm.,These Rings Fit Any 94 Bcd 5 Bolt Crankset,For Plus Size Bike Applications With The Surly Od Crankset, E.g. Instigator And Krampus, You Will Need To Use The Stock Spacers (Spacer Kit Qbp Part Number Cr8609) That Came With Your 1x Setup. You Will Also Need Some 16mm Bolts.,For 1x9, 1x10, 1x11 And 1x12 Drivetrains (Including Sram Eagle)Compatible With All 10, 11, And 12-speed Chains Except Shimano 12-speed Chains.,If Using A 9-speed Drivetrain Use A 10-speed Chain (Shifts And Works Well On A 9-speed Drivetrain And Fits The Ring Tighter For Better Chain Retention).,.,Chainline (Approximate As Bb Centring And Cranksets Vary).
The Wolf Tooth 64 BCD Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from an MTB to a road bike, the Wolf Tooth 64 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.Looks great when paired with the Wolf Tooth 104 BCD bash ring.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:Fits any 104/64 BCD crankset (104 BCD is the middle/big position 64 is the smallest ring position),The Universal Model fits both 104/64 BCD cranksets and the Shimano 11 speed XT M8000 cranks and SLX M7000 cranks. ,Drivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrains,Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains,Shimano 12-speed chains require the use of our Shimano 12-speed specific chainrings,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention,Chainline (approximate as BB centring and cranksets vary),Chainline is 46 mm on a triple and 48 mm on a double crank,Chainline on a Standard M8000 or M7000 crankset is 48mm and 50mm on a boost version.,You can use the stock bolts to mount this chainring.
The Wolf Tooth 130 BCD Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and designed to work your road or cyclocross bike, the Wolf Tooth 130 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:These rings are for use with 130 BCD 5 arm cranksets. ,Does not fit on the cranksets for Shimano DA 9000 / Ultegra 6800,Not compatible with Campagnolo CX10/11..Chain Compatibility:9, 10, 11, & 12spd Eagle - These chainrings are designed to work with all 9-speed, 10-speed, and 11-speed chains. They also work with 12 speed Eagle and 12-speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12-speed Flattop chain.,If using a 9-speed drivetrain use a 10-speed chain as it fits tighter for better chain retention.,Sram Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features fifth bolt with a 1x specific shoulder. This kit can be found online. ,Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position..38T important note: The chain may contact the spider arm slightly when using the 38T chainringWe recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for a 39T smallest ring....