Any dropper post with a 25mm or 26mm stanchion diameter - when in doubt, measure your stanchion.,Note that discrete position droppers will likely lose the lowest position because the valais 25 reduces the dropper travel by 25mm,Valais 25.25 (posts that have a confirmed 25mm diameter)Easton haven,Giant contact (internal routing),Raceface turbine,Rockshox reverb stealth,Specialized command post,9point8 fall line,Other 24.75-25.25mm (cable routing dependent),.,· valais 25.26 (posts that have a confirmed 26mm diameter)Thomson covert,Fox transfer,Other 26-26.5mm (cable routing dependent),.,Valais limits the dropper travel by at least 25mm. There are 2 models as noted in the compatibility section, one for the 25mm diameter stanchions and one for the 26mm stanchions.,At full compression, the valais' deep skirt contacts the seal collar first and will not contact the seal lip (protecting delicate seals from damage).Installation:,Remove the screw and slide valais over the seatpost stanchion,Put the valais at the highest position, install the screw and tighten to 2-3 nm,Install your saddle bag with it as full as it will be on the trail.,Let all the air out of your frame shock, drop the post, and compress the bike suspension all the way.,Assure there is adequate tyre to saddlebag clearance. If there is not tyre clearance, raise the dropper, and lower the valais until there is adequate tyre to saddlebag clearance.,Re-inflate your shock and be sure that the valais is torqued to 2-3 nm.
The Wolf Tooth Remote Clamp Conversion Kit allows you to attach a Wolf Tooth Dropper Lever to a specific handlebar diameter or brake lever.By attaching the dropper level to a brake calliper this gives the advantage of minimising components on the handlebars, creating a more compact set up. This also means the the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly.Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Hope brakes, Magura brakes, Shimano IS-AB, Shimano IS-EV, Shimano IS-II, and SRAM Matchmaker X.The Magura Brake conversion kit is for Magura brakes but is compatible with some 2-bolt SRAM brakes as well. The Hope conversion kit is also compatible with Tech3 Hope brakes. Key Features: Conversion kit to fit Wolf Tooth Remote Action Dropper Lever or Remote Light ,Action Dropper Lever to different brake levers and handlebar diameters,22.2mm clamp for flat mtb bars and 31.8mm for drop road bars,Conversion kit for: Hope brakes, Magura brakes, Shimano IS-AB, Shimano IS-EV, Shimano IS-II, SRAM Matchmaker X,Delrin and aluminium parts.
The Wolf Tooth ReMote Dropper Lever is ergonomic, lightweight and easy to install. Utilising sealed cartridge bearings for a silky-smooth action and a low profile, textured lever machined to the highest quality, this is the ultimate dropper upgrade.Compatible with all cable actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Compatibility:Compatible with all cable actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. ,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.,ReMote for Magura is compatible with the 2-bolt clamp SRAM brakes that do not feature Matchmaker X clamps.,ReMote for Hope is only compatible with Tech 3 brakes..Mounting Types:ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware,ReMote IS-II for Shimano I-Spec II - includes IS-II hardware ,ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.,ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem,ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware,ReMote Hope for Tech3 Hope Brakes - includes Hope hardware,ReMote IS-EV for Shimano I-Spec EV - includes IS-EV hardware.
The Wolf Tooth Giant Cog Is The Ultimate Upgrade For 1x Setups – Extending Your Cassette's Bottom Gear And Unlocking A Whole New Level Of Climbing Potential. Whether You're A Trail Shredder, Gravel Grinder Or Altitude Addict, This Cog Will Keep You Riding Even On The Toughest Climbs.Simply Replacing Your Existing Stock Sprocket On Shimano 10-speed Cassettes, This Gc Is The Result Of Endless Testing And Refinement By Wolf Tooth's Master Engineers And Riders. With Multiple Colour Options, You Have The Option To Add Some Additional Flair To Your Ride.
Key Features:These striking wolf tooth bar end plugs employ the distinctive wolf tooth logo and are perfectly primed for your mtb, gravel or road bike. Highly durable and built for the trails, these offer a great way to celebrate your love for all things adventure-led..
The Wolf Tooth Direct Mount Chainring for Race Face Cinch is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Race Face Cinch cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:Any Race Face Cinch™ system crankset.,Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability,Both standard (142mm rear hub spacing) and Boost (148mm hub spacing) offsets available. ,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline: Standard Offset 49mm for 26-34t, 51mm for 36t (additional chainstay clearance),Chainline: Boost Offset 52mm .
Wolf Tooth - Precision Is Integrated Standard HeadsetAny Frame That Uses Is (Integrated Standard) Headsets With 41mm Upper And 52mm Lower Outer Bearing Diameter,Uppers And Lowers Sold Separately,Enduro Stainless Steel Sealed Bearings Included On Both The Upper And Lower,.Upper Assembly Features:Ultralight Stem Cap With Integrated Spacer Plus An Aluminium Bolt And A Star Nut,7, 15 And 25mm Stack Height Top Cover Options (7mm Cover = 8mm Total Stack, 15mm Cover = 15mm Total Stack, 25mm Cover = 25mm Total Stack,O-ring Seal Prevents Water Intrusion Around The Steerer Tube,Custom Moulded Upper Lip Seal Provides Additional Protection For The Upper Bearing,.Lower Assembly Features:Custom Moulded Dual Lip Seal On The Crown Race To Protect The Lower Bearing In The Toughest Conditions.
Wolf Tooth Karv GripsGreat for longer rides, these superb grips are slightly thinner than Wolf Tooth's Fat Paw grips at 6.5mm thick. This makes them ideal for riders who enjoy going the extra distance across the forest as they reduce hand fatigue and finger numbness. Coming equipped with a dual-density silicone compound, these also provide you with fantastic vibration damping and conform to your hand for improved comfort while maintaining durability. Features: Material: 100% Silicone Use: MTB Diameter: 32mm Thickness: 6.5mm Length: 135mm Includes: Bar end plugs Weight: 75g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Karv GripsGreat for longer rides, these superb grips are slightly thinner than Wolf Tooth's Fat Paw grips at 6.5mm thick. This makes them ideal for riders who enjoy going the extra distance across the forest as they reduce hand fatigue and finger numbness. Coming equipped with a dual-density silicone compound, these also provide you with fantastic vibration damping and conform to your hand for improved comfort while maintaining durability. Features: Material: 100% Silicone Use: MTB Diameter: 32mm Thickness: 6.5mm Length: 135mm Includes: Bar end plugs Weight: 75g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth ShiftMount MTB Brake-Shifter MountThis adaptor mount is specifically designed to enable riders to integrate their SRAM or Shimano shifters with several different brakes such as Shimano, SRAM, and Magura (select option from the menu). Designed for simple and seamless drivetrain integration, this ShiftMount adaptor lets you mount your shifter to a specific brake type. This means that you'll benefit from more handlebar space thanks to this model's clever design that easily integrates your brakes and shifters for a clean look.Features: Use: MTB Mount Type: Multiple options available to select Compatibility: Designed to work with rear (right side) brakes and shiftersManufacturer's Part Numbers: SHF-MM-IS11 Black SRAM MM - I-Spec II WTSHF22ISII Black 22.2mm I-Spec II WTSHF22ISEV Black 22.2mm I-Spec EV WTSHFISEVMM Black I-Spec EV SRAM MMBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Magura Light Action Remote Dropper LeverThis Light Action dropper seatpost lever is engineered to solve common dropper remote problems with its ergonomic, compact and sturdy design. This Light Action version aims to solve common dropper remote complaints with its compact, ergonomic and sturdy design. The ReMote Light Action Dropper Lever has a longer lever arm than the standard ReMote, reducing the actuation force required by a third and making it ideal for dropper posts with a harder pull or if you prefer a light actuation feel. This dropper seatpost lever is another option in Wolf Tooth's industry-leading ReMote line of dropper remotes. Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers.Sealed Cartridge BearingIn an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with a captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Lightweight with Hassle-free InstallationWolf Tooth's team has also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice for those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to the engineered failure point, the lightweight ReMote leads in every category.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Clamp Type: Magura Clamp Included: Yes Ergonomic Easy to Install Sealed cartridge bearings Textured lever Made in USATechnologies: UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Number: WTREMOTELAMAGURABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth I-Spec EV to I-Spec II ShiftmountThis adaptor mount is specifically designed to enable riders to integrate their Shimano I-Spec EV shifter to a Shimano I-Spec II brake. Designed for simple and seamless drivetrain integration, this ShiftMount adaptor lets you mount your shifter to a specific brake type. This means that you'll benefit from more handlebar space thanks to this model's clever design that easily integrates your brakes and shifters for a clean look.This Shiftmount is perfect if you value seamless drivetrain integration and want to make efficient use of handlebar space. It allows you to mount your Shimano I-Spec EV shifter to a Shimano I-Spec II brake.Features: Use: Mountain Bike (MTB) Type: I-Spec EV to I-Spec II Shiftmount Designed to work with rear (right side) brakes and shiftersManufacturer's Part Number: WTSHFISEVISIIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.