The Park Tool HCW5 Double Sided Bottom Bracket Locking Hook Spanner is a popular and versatile Crank Wrench featuring Park Tool's proven Y head design. The HCW5 is double ended tool which saves space in the workshop and features a combined lockring tool, with a single hook on one end for the greatest versatility, and 3 pins on the other end for maximum engagement.
The Birzman M-Torque Ranger 6 Multi-tool allows you to take the precision of your torque wrench out on the road or trail! With the perfect selection of tools, you can easily adjust precision components without fear of over tightening.Have the precision of a torque wrench in the body of a multi-toolLightweight and durable aluminium and chromed vanadium constructionFeatures 4/5mm hex keys, T25 torx key and a flathead screwdriverCompact 112 x 36 x 25mm dimensions and weighs just 113gWith the M-Torque Ranger 6 Multi-tool, the precision of a torque wrench is at your fingertips whenever you need it. Your bike is just a reassuring click away from ultimate accuracy. As you tighten a bolt, the force through your thumb pushes on the raised button. When this force reaches 5Nm, the button will give a reassuring click. This click indicates the bolt has been tightened to the correct torque value. The tools include 3/4/5mm hex keys, T25 torx key and a flathead screwdriver, while body cover also doubles as a tyre lever. With a lightweight but durable polymer body and S2 Steel tools, the M-Torque Ranger 6 Multi-tool weighs just 113g and is designed to last for years to come, requiring no calibration or maintenance to keep going.
The Topeak Nano TorqBox Range is a series of neat TorqSockets that handily turn any multi-tool with a 5mm Allen key, making tightening those carbon handlebars or seat posts a little less stressful! Constructed from hardened steel with a small carry case, the each TorqBox features 5 Allen/Torx bits, giving you all the tools you should need for torque sensitive areas on your bike and is available in 3 pre-set torque setting. With typical Topeak design and execution, the Nano TorqBox is a great addition to any toolbox, hydration pack or saddle bag. Turns your multi-tool into a torque wrenchContains 5 Allen/Torx Bits 3mm / 4mm / 5mm / T20 / T25
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
The LifeLine Headset Cup Remover is simple to use and makes headset removal quick without damaging your frame. Instructions Start by securing your frame or bike in a workstand. Feed the closed end through the steerer tube until the splayed end opens inside the steerer tube. Make sure the splayed end of the tool is sat on the lip of the cup and hammer the cup out. When removing the tool follow the closed end down to protect the tool and repeat with the remaining cup. Tip: when hammering the cup out use a rag to catch the cup instead of sending it across the room.
Instructions for proper use: Unwind the handle to make room for the chain to be fitted to the tool Unwind the adjustable support screw at the rear of the tool Place the chain on the rear teeth of the tool (nearest the adjustable support) Tighten the adjusting support screw until it comes firmly into contact with the back of the chain Tighten the handle of the tool gently until the tool pin comes into contact with the centre of the chain pin If the two pins are not lined up, back off the handle and re-position the chain in the tool (repeat until the two pins are aligned) Now firmly tighten the handle to push the pin out, splitting the chain
The LifeLine 18 in 1 Multi-Tool with Co2 Inflator features the following tools: - Chain Tool with Retaining Hooks to secure the chain as you split or repair it - Press- on Co2 Inflator, compatible with presta and schrader valves - 2/4/5/6/8MM Hex Keys - Phillips and Flat head screwdrivers - Torx T25 and T30 Tools - 10MM Open Wrench - 3.23/ 3.33/ 3.45/ 3.96 Spoke Wrenches - Mavic® compatible Spoke Wrench
Featuring a square drive, plus 5 and 5.5 mm hexes that slip perfectly into the tight surroundings of most rims, the Park Tool nipple wrench works on wheels made by numerous manufacturers. These include the following (but are not limited to): FSA, Blackwell, Planet-X, HED, Rolf, Bontrager, Campagnolo and Mavic.
Although economically priced, the Park Tool pedal wrench pw5 with its 15mm head is like all Park Tool products, as it’s built to last. It's long enough to give you the leverage you need, but also compact enough to bring with you on your cycling holiday or to bike racing events.
Designed to get the maximum usage out of your chain, this fluid will remove all sorts of dirt and grease build-up from whatever terrain you have been riding. Ideal for use with the CM-5.2 Cyclone Chain Scrubber, and CM-25 Professional Chain Scrubber, or just as a general purpose degreaser, this formula is 100% biodegradable and plant-based, making it a smart and environmentally-friendly choice for getting your chain gleaming again. Safe to use on alloys, plastics and rubber parts and containing a rust inhibitor for added longevity, this Park Tool CB4 fluid will give your chain the best possible clean ahead of lubrication. Note: Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush.
Note: Axles must be removed before mounting these adaptors.
Constructed from CNC’d 7075 T-6 aluminium for a low weight and durability, this round-shaped version is specifically designed to be used with any cranks which feature a RaceFace Cinch interface. When working in tandem with modern clutch derailleurs, the possibility of chain drops is eradicated, making for a strong and confidence-inspiring experience.