The new, advanced non-contact Labyrinth seals yield a buttery-smooth spin with unparalleled protection against dust, water and mud. Ultra rigid plastic caps give high compression and deformation resistance, facilitating crisp shifting. Constructed of CNC machined 7075 aluminium. Adaptor cups and bearings for the installation of 24mm cranks in BB30 PF frames.
Rotor BSA 30mm Steel Bottom BracketCreated to enable you to run Rotor 3D+ BB30 Chainsets in frames that have threaded bottom bracket shells, this elegant bottom bracket is low in weight and spins freely on its steel ball bearings. The benefit of this design is that you can enjoy the added stiffness of a chainset with a larger 30mm spindle, but still have the larger and more durable bearings of an external bottom bracket.Please Note: The BSA30 is not compatible with BB89 or BB90 frames.Features: BSA 30 for BSA (English thread) frame Lathe and CNC T6 heat treated 7075 Aluminium Silicone seals offer low drag, quality-bearing protection For use with BB30 type chainsets with 30mm spindles only Part Number: C04-014-01010-0 Weight: Steel (black cups) 96gBuy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor BB30 to 24mm Steel Road Bottom BracketAn ingenious design, this converter bottom bracket enables you to use chainsets with 24mm spindles (eg. Shimano) in a frame with a BB30 bottom bracket shell. It can be used in both MTB frame and road bike frames and with its labyrinth no contact seals, it delivers smooth, unrestricted rotation and is protected from dirt and wet weather.Features: Material: T6 heat treated 7075 Aluminium cups Size: for BB30 shell only Axle/Spindle Compatibility: 24mm Threaded interface ensures perfect bearing alignment Provides airtight seal from frame contaminants and allows for self-installation /extraction For all Rotor and Shimano compatible 24mm cranks Available only with steel bearings in black Part Number: C04-015-01010-0 Weight: Steel (black): 122.5gPlease Note: This product is not suitable for use with Cannondale frames with "BB30A" shells, these frames require a specific chainset and bottom bracket systemBuy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor PF46 Steel Road Bottom BracketRotor's Press Fit bottom bracket bearings are compatible with all BB90 Press-Fit system frames that are manufactured to Shimano specifications. The new, advanced non-contact Labyrinth seals yield a buttery-smooth spin with unparalleled protection against dust, water and mud.Ultra rigid plastic caps give high compression and deformation resistance, facilitating crisp shifting. Available with steel or ceramic bearings. Constructed of CNC machined 7075 aluminium. Adaptor cups and bearings for the installation of 24mm cranks in BB30 PF frames.Features: Adaptor cups and bearings for the installation of 24mm cranks in BB30 PF frames.Steel (black) 137g.Anodized and lasered Aluminium cups.Lathe & CNC produced anodized AL cups with T6 annealing.High quality silicone external seals and inner seal tube prevent bearing contamination, increasing BB service life.Buy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor PF46 EVO386 Steel Bottom BracketRotor's Press Fit bottom bracket bearings are compatible with all BB90 Press-Fit system frames that are manufactured to Shimano specifications. The new, advanced non-contact Labyrinth seals yield a buttery-smooth spin with unparalleled protection against dust, water and mud.Ultra rigid plastic caps give high compression and deformation resistance, facilitating crisp shifting. Available with steel or ceramic bearings. Constructed of CNC machined 7075 aluminium.Features:For use in BB386EVO 46mm systems to convert down to 24mm axle systems.This can be used with Rotor 3D & Agilis cranks, and all shimano 24mm axle systems.Steel (black) 111g.Anodized and lasered Aluminium cups.Lathe & CNC produced anodized AL cups with T6 annealing. High quality silicone external seals and inner seal tube prevent bearing contamination, increasing BB service life Buy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Chrome steel 6805 bearings.,Fully CNC machined external cups.,Co-moulded bearing shields.,Wave washer spacers included.,BSA threading: 1.37" x 24T.,Fits 68/73mm wide brackets.,Fits 24mm spindle cranksets.,Cup tool: 16-notch 44mm OD (BTL-27L).,Made of: 7075 T6 aluminium..
A double-sided B.B. Socket born out of the increasing popularity of 30mm crank spindles.Made from CNC machined 7075 aluminium it's durable and provides very precise engagement with all the notches of the bottom bracket so won't chew up the bottom bracket.Compatible with Rotor® BSA 30, RaceFace® Cinch, Zipp® Vuma, Hawk Racing® BB3086 or other 12-notch Ø46.5mm external bearing bottom bracket cups.Compatible with FSA® EVO 386 or other 16-notch Ø48.5mm external bearing bottom bracket cups.Specification:Functions: 1/2" Dr.,Material: Alloy steel..
The Park Tool BB press removes and install the bearings and bearing units used in BB86, BB92, Shimano Press Fit, SRAM Press Fit GXP, Race Face Press Fit and other press fit bottom bracket systems using the nominal 24mm spindle. The Park Tool bb tool includes a bearing removal tool, which slides through and expands behind the bearing (like a head cup remover) so it can be tapped out with a hammer. The BBT-90.3 also includes two installation bushings (#669). Use the bushing in conjunction with an HHP-2 or HHP-3 Bearing Cup Press (sold separately) to press the bearings into the frame. Click here to see the user instruction manual for this product
DMR Axe Bottom Brackets to fit the below bottom bracket standards. Both press fit BB's require the specific BB tool. Before fitting the BB92 BB, you must check your frame is within the required tolerances using the BB92 gauge. Please Note: The axe crank uses a specific 30mm bottom bracket axle and is only compatible with the Axe Bottom Bracket. Other 30mm crank systems and BB's are not cross compatible.BB92 pressfit68/73mm BSA threadedPlease note: Image for illustration purposes only
Designed for running, the Zone3 Lightweight Phantom Run Shorts - 7 inch are lightweight with four-way stretch fabric and a short split helps to create the optimum running gait whether training or racing. Sacrificing weight doesn’t mean sacrificing comfort - a silk touch inner pant, combined with a lightweight ventilated waistband, soft elastic cord and a combination of wicking fabrics, ensure comfort no matter how hard the run. Finished with 360-degree reflectivity to aid visibility during low light conditions, while a back pocket provides convenient storage for a phone and front inner pocket keeps small items such as your keys safe.
Designed for running, the Zone3 Lightweight Phantom Run Shorts - 5 inch are lightweight with four-way stretch fabric and a short split helps to create the optimum running gait whether training or racing. Sacrificing weight doesn’t mean sacrificing comfort - a silk touch inner pant, combined with a lightweight ventilated waistband, soft elastic cord and a combination of wicking fabrics, ensure comfort no matter how hard the run. Finished with 360-degree reflectivity to aid visibility during low light conditions, while a back pocket provides convenient storage for a phone and front inner pocket keeps small items such as your keys safe.
Replacement External Bearing BB to fit FSA Gamma Drive MegaExo compatible cranks.Key Features:Oversized cartridge bearings,Forged steel and CNC machined external cups,Composite centre sleeve with double o-ring seals,Weight: 200g,Spindle: 19mm,Shell: 68, 73mm.