Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's tested and proven stainless bottom brackets are now available in a road specific version and make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ/SRAM road cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers for increased lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on the lightweight internal aluminium centre tube.
Genuine Hope bottom bracket replacement bearings.
Genuine Hope bottom bracket installation tool.
Fitted with high quality seals and bearings, our threaded bottom brackets are renowned for their durabilityKey FeaturesExternal bottom bracket designed for threaded bottom brackets,The machined aluminium cups hold either stainless steel cartridge bearings or ceramic bearings in stainless races,Custom Swiss made bearings are double sealed which gives a much greater life span than stock units,Cartridge bearings are replaceable,The unit is suitable for 68, 73, 83 and 100mm width bottom brackets,Designed to suit 24mm crank axles.Tech SpecsAll common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required),Available with replaceable stainless or ceramic bearings for less friction and greater durability,Designed to fit 24mm crank axles,Available for road, mtb, DH and Fatbikes,Free running labyryinth seal protects bearings and has less drag,Available in: black, silver, red, blue, purple and orange,Weight: 110g.
"High quality press fit 41mm bottom bracket bearing solution for 30mm crank axles."Key Features30mm axle compatable,High quality stainless bearings,designed to fit Press fit 41mm threadless bottom bracket shells,Suitable for road, mtb and fatbikes.Press Fit 41 30mm bottom bracket Tech Specs Fits 89.5, 92, 104.5, 107 and 121mm bottom bracket widths,Designed to suit cranks with a 30mm axle in a Press Fit 41mm bottom bracket shell,**NOTE**30mm PF41 bottom bracket does not use a threaded centre tube,Weight 77g.
As you might have worked out by now, headsets are a bit of a minefield! Integrated, integral, reducers, dimensions and types all contribute to confusing the situation. Don’t panic! We have now made top and bottom cups available separately allowing our headsets to fit almost any frame and fork combination. Hopefully this brochure will help you through choosing the right headset for your bike.A couple of things to remember though - we don’t necessarily do a headset to fit your bike! We have 4 ‘off the shelf’ combinations and a further 18 ‘Pick n Mix’ options. There are other styles, types and fittings out there. The first thing to remember is that you need accurate dimensions if you are at all unsure of what type you need.The second point to remember is that unfortunately there is no ‘standard’ - OK, we have the dimension 1 1/8 inch, which covers the majority of headsets now, but as far as Integral, integrated etc... these are simply terms used by different manufacturers to determine what they consider that style to be. Measure, check and measure again!One thing that is common throughout our range is the quality of materials used to manufacture them, here in our Barnoldswick Factory, the quality of the custom made stainless steel bearings and the time taken to hand assemble each and every one before it leaves, on it’s way to you!Our traditional headset is made to fit standard frames and 1 1/8 inch fork steerers. They include custom made stainless steel bearings (which are replaceable). The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The integral headset is made to fit low stack 1 1/8 inch frames (please check drawings for exact sizing). They include custom made stainless steel bearings (which are replaceable). The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The integrated headset is made to fit in 1 1/8 inch frames where the bearings fit directly into the frame. They include custom made stainless steel bearings (which are replaceable). The taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The tapered headset is designed to fit frames which are sized to accept integral 1 1/8 inch top cup and 1.5 inch integral bottom cups, where the fork steerer has a 1.5 crown and a 1 1/8 inch top. It is also possible to fit a standard 1 1/8 inch steerer using an additional conversion crown. The headsets include custom made stainless steel bearings (which are replaceable).The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium. All off the shelf headsets come complete with the Hed Doctor. Sealing is achieved through an adjustable taper ring cover and integrated rubber seal.The bearings also incorporate their own sealing, and being made from stainless steel to resist corrosion - a real advantage over a conventional steel bearing.
WTB i35 Custom MTB WheelThis i35 Custom mountain bike (MTB) wheel features superb components and a high-quality build to tackle wherever your next trail-riding adventure takes you. It comes kitted out with a Tubeless Ready WTB KOM Tough i35 TCS Rim, a Hope Pro 4 MTB Hub and stainless steel, plain gauge spokes. As a result, you'll benefit from its smooth and dependable rolling performance as you carve your way around the mountain. This wheel is ideal for enduro, all mountain and gravity/downhill riding.WTB KOM Tough i35 TCS RimThis rim features a super-durable alloy construction to ensure it can take everything the mountain throws at it, and it's also lightweight to ensure exceptional climbing efficiency. The durability is further enhanced by the I-Beam construction, while the dual support beams increase the stiffness for consistent, reliable handling. Plus, the 4D angled-spoke drilling disperses tension evenly to allow for a fast-rolling performance. Rim Features: Rim Material: Aluminium Rim Type: Clincher Tyre Compatibility: Standard clincher and tubeless clincher Tubeless Compatible: Yes Usage: Trail, Enduro, Gravity Width: 35mm (inner) Brake Compatibility: Disc brake only ERD: 27.5": 568mm; 29": 604mm 4D angled spoke drilling eliminates binding and lateral loading, dispersing tension more evenly over a greater area Recessed channel along rim centre has enabled installation of WTB's Solid Strip Solid Strip prevents tubeless tape sagging at the spoke holes for a smooth, consistent tyre/rim interface Weight: 602g (27.5"), 630g (29")Rim Technologies: UST Tubeless Ready: The UST concept improves traction, control and comfort while reducing inertia and flats. TCS 2.0 Technology: This refined version of the “Tubeless Compatible System” offers the same high-performance, lightweight mountain bike rim structure, but is now easier to install and more dependable.Hope Pro 4 MTB HubFrom their very first Ti-glide hubs launched back in 1993, Hope has had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstay of this reputation has been their attention to detail in both the bearings they use and their inspection processes. All bearings are from world-renowned manufacturers to ensure the highest quality. Also, every hub shell, freehub and axle are produced in their Barnoldswick factory and checked and inspected to the highest degree. The Hope Pro 4 hub builds upon the brand's Pro 2 EVO hub and offers superb attention to detail and excellent rolling performance thanks to the high-quality Schaeffler bearings throughout. Hub Features: Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Bearing Type: Sealed Stainless Steel cartridge bearings 4 Pawl Ratchet with 44 tooth engagement (8.2 deg) Conversions available for QR, 10mm bolt in, 10mm, 12mm and 142x12mm thru-axles Boost hub flanges move outboard 3mm compared to standard Pro 4 rear hub to increase complete wheel stiffness, only compatible with boost forks and frames. Freehub Options: Aluminium Shimano/SRAM 10-11 speed or SRAM XD cassette options Axle Compatibility: Multiple options available Weight: QR:311g; 142mm: 300gPlease Note: there are multiple front and rear hub options and rim sizes available for these wheels via the selection menu at the top of this page. Buy WTB Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Custom Enduro MTB Rear WheelHand-Built in the UK, this Custom Enduro MTB Rear Wheel from Hope combines the best of the best in mountain bike (MTB) hubs with the best of the rest in rims. The Race Face AR Plus rim is laced to Hope's Pro 4 Hub to bring you an exclusive MTB wheel ideal for enduro riding.The Hope Pro 4 hub is also convertible to suit most modern axle standards and the Race Face rim's 40mm internal width means it's compatible with plus-sized off-road tyres.Race Face AR Plus RimEngineered to roll with stability and pace over the most demanding terrains, this robust and reliable AR Plus MTB Rim boasts an impressive 40mm width that ensures you get the perfect tyre profile when using Plus tyres. Plus, this rim is tubeless-ready.Hope Pro 4 MTB Rear HubThe Hope Pro 4 hub builds upon their Pro 2 EVO hub and offers superb attention to detail, excellent rolling performance and thanks to the 4 pawl ratchet, a 10% quicker engagement. A highly durable, beautiful looking hub from Hope.From Hope's very first Ti-glide hubs launched back in 1993, they have had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstay of this reputation has been their attention to detail in both the bearings they use and their inspection processes. All the bearings used are from world-renowned manufacturers to ensure the highest quality. Also, every hub shell, freehub and internal axle are produced in their Barnoldswick factory and checked and inspected to the highest degree.Features: Rim Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Use: Enduro Internal Rim Width: 40mm - can be used with plus size tyres (2.8"+) External Rim Width: 44mm Spoke Holes: 32 Tubeless Ready: Yes Hub Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Bearing Type: Sealed Stainless Steel cartridge bearings Hand-built in the UK Race Face AR Plus Rim paired with Hope Pro 4 Hub to create a high-performance, unique and durable Enduro wheel 4 Pawl Ratchet with 44 tooth engagement (8.2 deg) Rear Boost hub flanges move outboard 3mm compared to standard Pro 4 rear hub to increase complete wheel stiffness Freehub Options: Aluminium Shimano/SRAM 10-11 speed or SRAM XD cassette options Axle Compatibility: Multiple Axle and Hub Spacing Options, see selection menu Spoke count: 32 hole Weight: 12x142mm: 300g; 12x148mm Boost: 311gPlease Note: there are multiple front and rear hub options for these wheels via the selection menu at the top of this page.Axle Options: Rear: Boost - 12mm x 148mm Thru Axle. Non Boost - 12mm x 142mm Thru Axle Freehub Options: Shimano HG or SRAM XDBuy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Custom Enduro MTB Rear WheelHand-Built in the UK, this Custom Enduro MTB Rear Wheel from Hope combines the best of the best in mountain bike (MTB) hubs with the best of the rest in rims. The Race Face AR Plus rim is laced to Hope's Pro 4 Hub to bring you an exclusive MTB wheel ideal for enduro riding.The Hope Pro 4 hub is also convertible to suit most modern axle standards and the Race Face rim's 40mm internal width means it's compatible with plus-sized off-road tyres.Race Face AR Plus RimEngineered to roll with stability and pace over the most demanding terrains, this robust and reliable AR Plus MTB Rim boasts an impressive 40mm width that ensures you get the perfect tyre profile when using Plus tyres. Plus, this rim is tubeless-ready.Hope Pro 4 MTB Rear HubThe Hope Pro 4 hub builds upon their Pro 2 EVO hub and offers superb attention to detail, excellent rolling performance and thanks to the 4 pawl ratchet, a 10% quicker engagement. A highly durable, beautiful looking hub from Hope.From Hope's very first Ti-glide hubs launched back in 1993, they have had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstay of this reputation has been their attention to detail in both the bearings they use and their inspection processes. All the bearings used are from world-renowned manufacturers to ensure the highest quality. Also, every hub shell, freehub and internal axle are produced in their Barnoldswick factory and checked and inspected to the highest degree.Features: Rim Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Use: Enduro Internal Rim Width: 40mm - can be used with plus size tyres (2.8"+) External Rim Width: 44mm Spoke Holes: 32 Tubeless Ready: Yes Hub Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Bearing Type: Sealed Stainless Steel cartridge bearings Hand-built in the UK Race Face AR Plus Rim paired with Hope Pro 4 Hub to create a high-performance, unique and durable Enduro wheel 4 Pawl Ratchet with 44 tooth engagement (8.2 deg) Rear Boost hub flanges move outboard 3mm compared to standard Pro 4 rear hub to increase complete wheel stiffness Freehub Options: Aluminium Shimano/SRAM 10-11 speed or SRAM XD cassette options Axle Compatibility: Multiple Axle and Hub Spacing Options, see selection menu Spoke count: 32 hole Weight: 12x142mm: 300g; 12x148mm Boost: 311gPlease Note: there are multiple front and rear hub options for these wheels via the selection menu at the top of this page.Axle Options: Rear: Boost - 12mm x 148mm Thru Axle. Non Boost - 12mm x 142mm Thru Axle Freehub Options: Shimano HG or SRAM XDBuy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Custom Enduro MTB Rear WheelHand-Built in the UK, this Custom Enduro MTB Rear Wheel from Hope combines the best of the best in mountain bike (MTB) hubs with the best of the rest in rims. The Race Face AR Plus rim is laced to Hope's Pro 4 Hub to bring you an exclusive MTB wheel ideal for enduro riding.The Hope Pro 4 hub is also convertible to suit most modern axle standards and the Race Face rim's 40mm internal width means it's compatible with plus-sized off-road tyres.Race Face AR Plus RimEngineered to roll with stability and pace over the most demanding terrains, this robust and reliable AR Plus MTB Rim boasts an impressive 40mm width that ensures you get the perfect tyre profile when using Plus tyres. Plus, this rim is tubeless-ready.Hope Pro 4 MTB Rear HubThe Hope Pro 4 hub builds upon their Pro 2 EVO hub and offers superb attention to detail, excellent rolling performance and thanks to the 4 pawl ratchet, a 10% quicker engagement. A highly durable, beautiful looking hub from Hope.From Hope's very first Ti-glide hubs launched back in 1993, they have had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstay of this reputation has been their attention to detail in both the bearings they use and their inspection processes. All the bearings used are from world-renowned manufacturers to ensure the highest quality. Also, every hub shell, freehub and internal axle are produced in their Barnoldswick factory and checked and inspected to the highest degree.Features: Rim Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Use: Enduro Internal Rim Width: 40mm - can be used with plus size tyres (2.8"+) External Rim Width: 44mm Spoke Holes: 32 Tubeless Ready: Yes Hub Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Bearing Type: Sealed Stainless Steel cartridge bearings Hand-built in the UK Race Face AR Plus Rim paired with Hope Pro 4 Hub to create a high-performance, unique and durable Enduro wheel 4 Pawl Ratchet with 44 tooth engagement (8.2 deg) Rear Boost hub flanges move outboard 3mm compared to standard Pro 4 rear hub to increase complete wheel stiffness Freehub Options: Aluminium Shimano/SRAM 10-11 speed or SRAM XD cassette options Axle Compatibility: Multiple Axle and Hub Spacing Options, see selection menu Spoke count: 32 hole Weight: 12x142mm: 300g; 12x148mm Boost: 311gPlease Note: there are multiple front and rear hub options for these wheels via the selection menu at the top of this page.Axle Options: Rear: Boost - 12mm x 148mm Thru Axle. Non Boost - 12mm x 142mm Thru Axle Freehub Options: Shimano HG or SRAM XDBuy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.