The Campag Crank & Bearing Tool Set CBP-8 comes equipped with everything you need to get to work on your specialised cranks and bearings, taking them off and putting them back firmly and safely to keep your pedalling in peak condition. The set features a Power Torque compatible crank puller, crank removal extension plug and crank bearing removal adaptor as well as a bearing puller and setter which will also work with Ultra-Torque systems. Completing the set are protective pads and adaptors for use with both carbon and aluminium cranks, making it just the job for an often arduous task.
This Park Tool bearing press kit is equipped with one bottom bracket bearing remover and two bushings that will assist with the fitting of new bearings (separately sold headset press tool also required to install pressfit bearing/cups). Ideally suited to removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems, this pack will help you to get the job done in no time at all. An up-to-date version of Park Tool's BBT-30.3, this set gives a longer length to work with wider fat bottom bracket shells, making it a fantastic tool to add to any garage or professional bike workshop. How To Use: To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings (included) are used with a headset press (not included) to quickly and accurately press the bearings into the shell.
After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell.
Park Tool Bottom Bracket/Cassette Tool BBT-5/FR-11Specially created by Park Tool to suit Campagnolo’s bottom brackets and cassette lockrings, the BBT-5/FR-11 bike tool is an essential workshop addition. Made from tool-specific alloy steel, it’s made for repeated use and its large nut-style base makes it easy to use with wrenches or your vice, enabling you to get the grip you need to remove stubborn components. Plus, despite its high strength, Park Tool gave it thin-walled sides, so you can easily remove cassettes without the need to disassemble the hubs axle.Features: Material: Heat Treated Alloy Tool Steel Fits all Campagnolo cassette lockrings Also fits Campagnolo Record, Chorus, Centaur, and Athena bottom brackets The outside diameter of the BBT-5/FR-11 is 22.8mm and has 12 splines Always use a skewer or axle nut to hold the tool firmly in place during removal and installation Centre bore for axle or spindle clearance is 16mmBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Tool (BBT-29)If you’re a busy shop or home mechanic that’s regularly working on bike drivetrains, the BBT-29 Bottom Bracket Tool is an ideal addition to your kit. Easy to use and bringing you plenty of leverage, Park Tool has given it two 16-notch cut-outs. One of the sizes suits cups with a 39mm outer diameter such as Shimano types and one has a 48.5mm size to suit FSA MegaEvo models.Features: Removes bottom brackets with 16-notch bearing cups Suitable for 39mm bottom bracket cups such as Shimano Dura-Ace 9000 series and XTR 980 series Suitable for 48.5mm (e.g. FSA MegaEvo).Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Bearing Tool Set BBT-30.4Install and extract bottom bracket bearings with this Bottom Bracket Tool Set from Park Tool. This set includes everything required to easily tackle bottom bracket bearings in a range of bracket systems. Efficient Bottom Bracket Bearing RemovalComprised of a bottom bracket bearing remover and two bushings for fitting new bearings, the Bottom Bracket Bearing Tool Set BBT-30.4 is suitable for removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems. To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings are used with a head cup press (not included) to quickly and accurately press the bearings into the shell.This updated take on the BBT-30.3 features additional length to work with wider fat bottom bracket shells, making the Bottom Bracket Bearing Tool Set BBT-30.4 a great addition to any garage or workshop.Features: Compatibility: BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems Included parts: Extra-long bottom bracket bearing remover, 2 x bushings for use with head cup press (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Crank & Bottom Bracket Wrench HCW-4As a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools' many years of experience. The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.Features:Our popular and versatile Crank Wrenches feature the Park Tool proven “Y” head design. 36mm box-end and bottom bracket pin spannerCenter to center measurement between pins is 29mm. Pin diameter is nominally 2.3mm. Part number for pin is #1501Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Compact Bottom Bracket Tool BBT-18The BBT-32 is a heavy duty, investment cast tool for installing and removing the following eight-notch bottom bracket cups:Features:Shimano ISIS Drive ISIS OverdriveNote: The BBT-32 is an updated version of the current BBT-8. The outside diameter of the tool has been changed so it provides a universal fit on all Shimano and ISIS Drive eight-notch cups. The BBT-32 has 8 notches with an outside diameter of nominally 43.4mm. The inside-to-inside width is approximately 38mm. Each notch is approximately 3.9mm wide. The hole in the center of the casting is 22.5mm, and will not fit over the 30mm spindles.Buy Park Tool Workshop Toolsfrom Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Tool (BBT-22)The professional-level BBT-22 tool is a tough and long-lasting steel socket and it's ideal for extracting even the most stubborn bottom brackets and fitting new ones. Park Tool gave it flat splines to combine accurately with compatible models, giving you a reliable grip as you're loosening or tightening.This tool is compatible with Shimano Octalink and FSA ISIS Drive splined 20-tooth bottom bracket cups and can be used with a 3/8" drive torque wrench, a 3/8" ratchet driver, a 32mm wrench, a Park Tool FRW-1 Freewheel Remover Wrench or a 1” wrench.Features: Material: Investment Cast Steel The BBT-22 replaced the BBT-2, and will fit all bottom brackets serviced by the BBT-2 The twenty tooth pattern is used on a wide variety of bottom brackets, including models from Shimano®, Truvativ®, Race Face®, FSA®, and others The tool clears the oversized spindles of ISIS Drive and Octalink Can be used for removal and installationBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Lockring Wrench HCW-5Double sided bottom bracket lockring hook spanner. One side is a single hook, the other is a hook spanner with 3 notches for better engagement in the lockrings. The three-hook end will fit 3-notch lockrings with a maximum outside diameter of 46mm, and minor diameter (in the notches) of 40mm.NOTE: The HCW-5 is designed for bottom bracket lockrings. For fixed gear lockring, use the HCW-17.Buy Park Tool BB Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Tool BBT-47The Park Tool BBT-47 is engineered for fitting and removal of 12-notch Chris King, Enduro BBRight and Rotor external bottom bracket cups with a outer cup diameter of 50-53mm and 48.2mm internal. This tool is also compatible with other bottom brackets with these dimensions. And it's compatible with 3/8" torque ratchet drive wrenches.Precision CNC machined dual-sided aluminium tool for the installation and removal of 12 external notch T47 and PF30 bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. Features: Fits 12-notch bottom bracket tool fittings with Outer Diameter: 50-53mm and inner diameter: 48.2 mm Compatibility: BBInfinite T47 Chris King ThreadFit T47 Chris King ThreadFit 30 Enduro BBRight Torqtite Hambini T47 Rotor T47 External 30mm Rotor BBright, BB30, BB386EVO, and PF30 thread-togetherBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Tool BBT-47The Park Tool BBT-47 is engineered for fitting and removal of 12-notch Chris King, Enduro BBRight and Rotor external bottom bracket cups with a outer cup diameter of 50-53mm and 48.2mm internal. This tool is also compatible with other bottom brackets with these dimensions. And it's compatible with 3/8" torque ratchet drive wrenches.Precision CNC machined dual-sided aluminium tool for the installation and removal of 12 external notch T47 and PF30 bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. Features: Fits 12-notch bottom bracket tool fittings with Outer Diameter: 50-53mm and inner diameter: 48.2 mm Compatibility: BBInfinite T47 Chris King ThreadFit T47 Chris King ThreadFit 30 Enduro BBRight Torqtite Hambini T47 Rotor T47 External 30mm Rotor BBright, BB30, BB386EVO, and PF30 thread-togetherBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.