Custom built by us here at the Source. One of the best racing wheelset we have every built these wheels are built around Onyx patented sprag clutch mechanism which gives you instant engagement when pedaling and instant disengagement coasting for less drag. The wheels have been topped of with Stay Strong V3 pro carbon rims with double butted Halos spokes to make them super light and saving on that rotaion weight! ###section### Product Specs WHEEL SIZE:20" HUB:Onyx BMX Ultra HG 10mm Race Hubset AXLE:Rear 100/10mm Front /110/10mm RIM:Stay Strong V3 Pro 1.75" Carbon Rims SPOKES:Double Butted NIPPLES: WEIGHT:Front 727g / Rear 945g
Custom built by us here at the Source. These wheels are built around Onyx patented sprag clutch mechanism which gives you instant engagement when pedaling and instant disengagement coasting for less drag. The wheels have been topped of with Stay Strong 1 1/8" Reactiv rims. ###section### Product Specs WHEEL SIZE:20" HUB:Onyx BMX Pro HG 10mm Race Hubset AXLE:Rear 100/10mm Front /110/10mm RIM:Stay Strong 1 1/8" Reactiv Rims SPOKES:Rear Double Butted / Front Straight Gauge WEIGHT:Front 607g / Rear 862g
Custom built by us here at the Source. These wheels are built around Onyx patented sprag clutch mechanism which gives you instant engagement when pedaling and instant disengagement coasting for less drag. The wheels have been topped of with Stay Strong 1 1/8" Reactiv rims. ###section### Product Specs WHEEL SIZE:20" HUB:Onyx BMX OHM HG 10mm Race Hubset AXLE:Rear 100/8mm Front /110/10mm RIM:Stay Strong 1 1/8" Reactiv Rims SPOKES:Rear Double Butted / Front Straight Gauge NIPPLES: WEIGHT:Front 576g / Rear 768g
Tom Dugan's signature sprocket from Odyssey. The fang sprocket is machined from 7075 aluminum and increases in thinkness towards the center of the sprocket for increased strength ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 71g / 2.5oz
Hand Built right here at Source by BMXers! This Custom Rear Wheel is built to the highest standards with super tight spokes and is ready to ride right out of the box. This wheel is built around Odyssey’s C5 cassette hub which is designed to work either as a right hadn’t drive or left hand drive hub. The hub also comes with plastic non drive side hub guard and male 14mm axle with 9t driver, laced into the Proven Cinema 333 rim for a super reliable cassette wheel.
Hand Built right here at Source by BMXers! This Custom Rear Wheel is built to the highest standards with super tight spokes and is ready to ride right out of the box. This wheel is built around Odyssey’s Antigram V2 cassette hub which is designed to work either as a right hand drive or left hand drive hub. The hub also comes with plastic non drive side hub guard and female 14mm axle with 9t driver, Laced into the Odyssey Quadrant rim for a super reliable cassette wheel.
Hand Built right here at Source by BMXers! This Custom Front Wheel is built to the highest standards with super tight spokes and is ready to ride right out of the box. This wheel is built around Odyssey’s C5 hub which features two sealed bearings and beefed up flanges for better durability. The hub also comes with 2 plastic hub guards and has female 10mm bolts. Laced into the Proven Cinema 333 rim for a reliable and clean looking from wheel
Chase Hawk signature model. This stem features a front-load design with unique asymmetric bolt pattern for a smooth profile Internal clamping system, Forged 6061-T6 aluminum increases strength and minimizes waste, 53mm reach, 9.5mm rise or 22.5mm when flipped and weighs only 9.2 oz. (261g). Available in Black or Raw only ###section### Product Specs TYPE: Front Load REACH: 53mm RISE: 9.5mm CLAMPING DIAMETER: 22.2mm WEIGHT: 261g
The American National Standards Institute, ANSI, has developed standards for impact resistance and materials of Safety Glasses in the workplace. That is where Oakley’s Industrial Collection comes in. The Industrial collection takes our top Impact Resistant styles and marks them with the appropriate ANSI markings to designate them as official Safety Glasses.Oakley Standard Issue introduces a revolutionary competitive shooting eyeshield, Tombstone™. We worked with top marksmen to identify the most crucial problems they encountered with conventional eyewear. The response focused on three specific areas: Field of View, Contrast/Clarity, and Lens Interchangeability. Solving these problems was at the forefront of designing all aspects of Tombstone™. Using eye-tracking technology, we identified the key zones in your field of view to allow for 120 degrees of vision. We incorporated PRIZM™ technology to provide contrast enhanced viewing to help lock in your target and decrease eye fatigue/eye strain. Finally, we integrated a single release trigger for rapid lens exchange that is fingerprint free. The end result: Tombstone™, our most advanced shooting eyeshield delivering unprecedented performance for the modern day marksman.• Lens Mark: Z87+• Temple Mark: UL AN/NZS 1337• * Z87+ Molded into the Frame• Switchlock Quick Lens Exchange allows for a lenses to be switched out easily, without placing fingerprints on lens surface• Thin Stem technology enables compatibility with over-ear hearing protection and comms• Unobtanium® nosepad provides a no slip grip even under wet conditions• Lens profile expands zone to a full 120 degree view and a lens curvature that extends the peripheral view allowing shooters to easily acquire a comfortable sight picture
Designed for ease of use, this spacer allows you to fine-tune the chain line of your bottom bracket. This will work with all brands of threaded bottom brackets. Key Features: Material: Alloy,Use: MTB,Compatibility: Threaded bottom brackets.
Prepared for intense MTB rides, this bottom bracket is engineered for unpredictable riding conditions on your mountain bike. It features a machined alloy construction, which makes it more than capable of handling all the abuse associated with all-day epics on the mountain bike trails. Nukeproof has also equipped this trail-ready bottom bracket with an anodised finish, which gives it an extra layer of protection against corrosion. MTB Bottom Bracket with Titanium Coated Bearings All set for fast-paced mountain bike adventures, this bottom bracket is equipped with titanium coated race bearings and stainless-steel balls. The titanium coating is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. ABEC 5 certified and protected against the elements, the Nukeproof Bottom Bracket SRAM DUB BSA is an excellent upgrade for riders who want a reliable component on tough mountain bike rides. Please note: Nukeproof are also offering a two-year warranty on their bottom brackets including the bearings. Key Features: Cup Material: Alloy,Bearing Material: Titanium coated race bearings,Ball Material: Stainless-Steel,Finish: Anodised,Use: MTB,Compatibility: SRAM DUB cranks,Thread: BSA 1.37"x24 TPI,Certification: ABEC 5.
Prepared for intense MTB rides, this bottom bracket is engineered for unpredictable riding conditions on your mountain bike. It features a machined alloy construction, which makes it more than capable of handling all the abuse associated with all-day epics on the mountain bike trails. Nukeproof has also equipped this trail-ready bottom bracket with an anodised finish, which gives it an extra layer of protection against corrosion. MTB Bottom Bracket with Titanium Coated Bearings All set for fast-paced mountain bike adventures, this bottom bracket is equipped with titanium coated race bearings and stainless-steel balls. The titanium coating is applied in a vaporised vacuum environment, which allows its structure and density to be fine-tuned. ABEC 5 certified and protected against the elements, the Nukeproof Bottom Bracket SRAM DUB BSA is an excellent upgrade for riders who want a reliable component on tough mountain bike rides. Please note: Nukeproof are also offering a two-year warranty on their bottom brackets including the bearings. Key Features: Cup Material: Alloy,Bearing Material: Titanium coated race bearings,Ball Material: Stainless-Steel,Finish: Anodised,Use: MTB,Compatibility: SRAM DUB cranks,Thread: BSA 1.37"x24 TPI,Certification: ABEC 5.