Constructed with a carbon reinforced-polymer shell, it maintains a low weight and reliably sturdy performance at high-speeds, with its carbon fibre rails keeping a firm and dependable hold, however hard you ride. Padded with EVA foam and equipped with a large central cut out, this Falcon has a focus on comfort and keeps you protected from perineal pressure and sit bone stress. The flat design increases stability on descents and makes moving across its PU-covered surface an absolute breeze as you find your optimum position for the hunt.
Hand Built right here at Source by BMXers! This Custom Front Wheel is built to the highest standards with super tight spokes and is ready to ride right out of the box. This wheel is built around Federal’s Stance Pro hub which features oversized bearings and flanges for better durability on the streets. The hub also comes with 2 plastic hub guards and has female 10mm bolts. laced into the Odyssey Quadrant rim for a super reliable front wheel.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Industry Nine Race Face AR40 Custom Front WheelThis custom front wheel combines a Race Face AR Plus Rim with an Industry Nine Torch Hub for the best balance of toughness, reliability and smooth-rolling performance as you hit the trails. It also comes complete with Mach1 double-butted spokes and Sapim nipples for exceptional strength, wherever your next MTB ride takes you. Benefitting from tubeless ready technology and 6-bolt disc brake rotor compatibility, this is a perfect choice of upgrade for a wide range of riding disciplines.Race Face AR Plus RimHand-built in the UK to roll with stability and pace over the most demanding terrains, this robust AR Plus MTB Rim boasts an impressive 40mm internal width that ensures you get the perfect tyre profile when using Plus tyres. Thanks to its machined and forged 2014 T6 aluminium billet construction, it provides excellent strength without adding any unnecessary weight. Another highlight is its tubeless ready design, which means that you can enjoy tubeless advantages such as lower rolling resistance, increased stability on tough terrains and fewer chances of flats or punctures.Industry Nine Torch Classic HubThe Industry Nine Classic Hub is the heart of your wheel, everything revolves around it, literally. Every Classic mountain hub is made from start to finish in the brand's Asheville, NC machine shop. From turning and milling bar stock 7075-T6 aluminium for shells, axles and endcaps, wire EDM cutting A2 tool steel for pawls and drivers, to its own in-house anodization lab, every step of design, engineering, manufacturing and assembly is done on-premises to its exacting standards.The Torch mountain hub is loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools.Mach1 Double Butted Spokes with Sapim NipplesComing equipped with Mach1 double butted spokes, this custom front wheel delivers maximum stiffness without compromising weight. The additional benefit of high-quality Sapim nipples ensures extra strength as well as anti-corrosion properties. This front wheel hub uses 20x110mm Non Boost axle spacing, which makes it ideal for handling the demands of modern MTB riding. It also has 6-bolt disc brake rotor mounts, so you can fit your favourite hydraulic disc brakes for powerful and consistent braking performance.Features: Rim Material: Machined from Forged 2014 T6 Aluminium billet Use: Mountain Bike (MTB) Axle Size: 20x110mm Non Boost Spoke Type: Mach1 Double Butted Nipple Type: Sapim nipples Hole Count: 32 Hub: Industry Nine Torch Hub Brake Compatibility: 6-bolt disc brake Internal Rim Width: 40mm - can be used with plus size tyres (2.8"+) External Rim Width: 44mm Tubeless Ready: Yes Single or Pair: Single front wheel Hand-built in the UK Rim Weight: 595g (without hub and spokes)Manufacturer's Part Number: CWB100 27.5"Buy Industry Nine Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
BSA 30 bottom bracketServiceable double lip sealed Angular Contact Enduro bearingsUSA machined aluminium shell for superior function and durabilityEnglish threadBlack anodized
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g
Hope's well proven stainless bottom brackets make an ideal upgrade or replacement for Shimano, Race Face and with an additional conversion kit (sold separately) Truvativ MTB cranksets - Not suitable for road bike cranksets.The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal and o-rings on on internal aluminium centre tube. Compatible with most 24mm axle MTB cranksets - Not suitable for road bike cranksets.
Hope's well proven stainless bottom brackets make an ideal choice for the consumer who is looking for longevity and a smooth transition. The machined aluminium cups hold full stainless steel INA Swiss made cartridge bearings which are custom made to give much greater life span than stock units and are also replaceable to reduce wastage and minimise expense. The bearings are designed to run directly on the crankset axle, without the use of shims or spacers which further increases lifespan and reliability when combined with the non contact, free running external labyrinth seal. Shell Width: 68/73mmAxle Width: 30mmWeight: 110g