The Ratcheting Wrench from Park Tool is a combination metric wrench with both an open and 12-point two way ratcheting box end.This wrench has been constructed from vanadium steel which has then been chrome plated and polished giving you a high strength, high quality finish.The wrench is finished with a Park Tool blue vinyl which gives a secure positive grip. This is a world-famous Park Tool quality wrench which will last you a lifetime.
Spare mounting bars allow you to attach your WeeRide Safe Front product to another bike without having to move the fixing point. This will save a lot of time as a seat can be moved from one bike to another in under a minute.Fits all WeeRide centre mounted bicycle child carriersSturdy steel frame with powder coated finish for extra durabilityCoated brackets to help protect your bike's finishFits most adult bicycle framesIncludes tools for assembly
If you need to refresh the wiring of your Exposure Revo Dynamo light, the Revo Connecting Kit is just what you need. Including the cable and associated frame mounts, the Revo Connecting Kit has all you need to get the job done.
The Park Tool CRS1 Crown Race Setting System has taken a fresh new approach to crown race installation. Traditionally, a mechanic would slam a tube down onto the bearing surface to set the race in place. The CRS1 offers a different approach that offers faster, safer, and more precise installation. The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube and into the top end of the insert. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS1 set includes one universal setting tube, three 1 inserts, and three 1-1/8 inserts.
Installing cables internally though your frame can test anyone s patience however with this Internal Cable Routing Kit from Park Tool you can get the job done efficiently without any stress.This kit can help you to route gear cables, electric wires, brake cables etc on any type of bike frame whether its carbon, aluminium, titanium etc. This kit has four plastic coated 250cm cables with magnets attached and each with a unique fitting for different cable types. There s also an external guide magnet which allows you to speed up the operation. Opposite polarity magnets on the cables will attach themselves inside the frame tube making it simple to route through the frame.To keep up with new technologies this kit now includes a dedicated e-tube Di2 cable connector that will easily pull through a 6mm frame hole. This makes it easy to route through the frame saving you valuable time and this kit can be used with any frame size including tandems.This kit includes:4 x Plastic coated 250cm Cables with magnetsUnique fittingsExternal Guide Magnet
The Ratcheting Wrench from Park Tool is a combination metric wrench with both an open and 12-point two way ratcheting box end.This wrench has been constructed from vanadium steel which has then been chrome plated and polished giving you a high strength, high quality finish.The wrench is finished with a Park Tool blue vinyl which gives a secure positive grip. This is a world-famous Park Tool quality wrench which will last you a lifetime.
This Ratcheting Wrench Set from Park Tool consists of 12 high quality open and two-way box end ratchet wrenches from with sizes ranging from 6mm up to 17mm.Each wrench has been constructed from vanadium steel which has then been chrome plated and polished giving you a high strength, high quality finish.Every wrench has also been finished with a Park Tool blue vinyl which gives a secure positive grip. This is a world-famous Park Tool quality wrench set which will last you a lifetime and help you to have the correct wrench for any task.This set includes the following sizes:MWR-6 6mmMWR-7 7mmMWR-8 8mmMWR-9 9mmMWR-10 10mmMWR-11 11mmMWR-12 12mmMWR-13 13mmMWR-14 14mmMWR-15 15mmMWR-16 16mmMWR-17 17mm
The Park Tool TSB2.2. is the tilting base specifically designed for use with the Park Tool TS2 and TS2.2 Professional Wheel Truing Stands. It allows for adjustment of the truing stand 20 degrees forward or backward for comfortable use at any bench height. The handy bins in the front of the Tilting Base are specially designed to hold Park Tool Spoke Wrenches and other small items such as spoke nipples.
The V4 vented rotor is specifically for use with the Hope Tech V4 Evo brake as it is slightly wider than the standard floating Hope rotors this rotor will not fit into any other Hope caliper in the range. The vented rotor is designed specifically for our Tech V series brakesThe rotor uses internal fins to allow the air to flow between the two friction partsThe induced air flow significantly reduces heat build up in the rotorFantastic and consistent braking performance in wet conditions thanks to its capability to clear the water layer through its finsDyno tests show up to 15% less heat build up compared to our floating rotors6 BoltWeight 203mm: 288gThe V4 rotor effectively reduces the temperature of the disc by up to 15% and enables superior braking performance when the going really gets tough on steep Alpine descents and on the worlds toughest downhill tracks.The V4 rotor also gives exceptional braking performance in wet conditions as its fins enable water and moisture to be shed consistently keeping the braking the surface dry and ready for when you slam the anchors on when hurtling towards a berm at break neck speeds.
The V4 vented rotor is specifically for use with the Hope Tech V4 Evo brake as it is slightly wider than the standard floating Hope rotors this rotor will not fit into any other Hope caliper in the range. The vented rotor is designed specifically for our Tech V series brakesThe rotor uses internal fins to allow the air to flow between the two friction partsThe induced air flow significantly reduces heat build up in the rotorFantastic and consistent braking performance in wet conditions thanks to its capability to clear the water layer through its finsDyno tests show up to 15% less heat build up compared to our floating rotors6 BoltWeight 203mm: 288gThe V4 rotor effectively reduces the temperature of the disc by up to 15% and enables superior braking performance when the going really gets tough on steep Alpine descents and on the worlds toughest downhill tracks.The V4 rotor also gives exceptional braking performance in wet conditions as its fins enable water and moisture to be shed consistently keeping the braking the surface dry and ready for when you slam the anchors on when hurtling towards a berm at break neck speeds.
The V4 vented rotor is specifically for use with the Hope Tech V4 Evo brake as it is slightly wider than the standard floating Hope rotors this rotor will not fit into any other Hope caliper in the range. The vented rotor is designed specifically for our Tech V series brakesThe rotor uses internal fins to allow the air to flow between the two friction partsThe induced air flow significantly reduces heat build up in the rotorFantastic and consistent braking performance in wet conditions thanks to its capability to clear the water layer through its finsDyno tests show up to 15% less heat build up compared to our floating rotors6 BoltWeight 203mm: 288gThe V4 rotor effectively reduces the temperature of the disc by up to 15% and enables superior braking performance when the going really gets tough on steep Alpine descents and on the worlds toughest downhill tracks.The V4 rotor also gives exceptional braking performance in wet conditions as its fins enable water and moisture to be shed consistently keeping the braking the surface dry and ready for when you slam the anchors on when hurtling towards a berm at break neck speeds.
The V4 vented rotor is specifically for use with the Hope Tech V4 Evo brake as it is slightly wider than the standard floating Hope rotors this rotor will not fit into any other Hope caliper in the range. The vented rotor is designed specifically for our Tech V series brakesThe rotor uses internal fins to allow the air to flow between the two friction partsThe induced air flow significantly reduces heat build up in the rotorFantastic and consistent braking performance in wet conditions thanks to its capability to clear the water layer through its finsDyno tests show up to 15% less heat build up compared to our floating rotors6 BoltWeight 203mm: 288gThe V4 rotor effectively reduces the temperature of the disc by up to 15% and enables superior braking performance when the going really gets tough on steep Alpine descents and on the worlds toughest downhill tracks.The V4 rotor also gives exceptional braking performance in wet conditions as its fins enable water and moisture to be shed consistently keeping the braking the surface dry and ready for when you slam the anchors on when hurtling towards a berm at break neck speeds.