SRAM Alloy GXP Road/MTB Bottom BracketSuitable for road or mountain bike use, this SRAM bottom bracket is equipped with Gutter Seal technology, which significantly improves protection from wet weather and reduces drag on the seals. SRAM has given it a revised, cleaner look with its redesigned, forged cup. The SRAM Alloy GXP Bottom Bracket brings a new standard in external bearing performance as the custom steel bearings, sealed cartridge bearings, and tungsten finish offer a high-end, reliable bottom bracket.Features: Use: Road or MTB Compatible with SRAM and Truvativ chainsets only Gutter Seal technology Improved tool engagementSealed cartridge bearingsCustom steel bearingsTungsten finish Compatibility (check your bike's frame first):68/73mm for most MTBs, 83mm for many Downhill bikes, 70mm for many Italian road bikesTechnologies:GXP: Giga X Pipe External Bottom Bracket Bearing Assembly. While other systems rely on side loading the bearings to eliminate play, which causes premature bearing wear, the GXP system is different. The GXP system captures the left side bearing between the spindle and the left crank arm while allowing the drive-side bearing to float axially on the spindle, thereby eliminating the necessity to side-load bearings during adjustment. The simplicity of installation is refined: once it is tightened to the proper specifications you are ready to roll with a worry free BB. The GXP system uses two bicycle specific cartridge bearings and eight seals for a smooth and long-lasting ride.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM DUB BSA Bottom BracketThe SRAM DUB BSA Bottom Bracket is the single, unified replacement for both 30mm and 24mm crank spindle and bottom bracket systems. The Durable Unified Bottom Bracket (DUB) system features a 28.99mm crankset spindle/inner bearing diameter alongside incredibly lightweight BB30 bearings and a strong crank spindle with all the advantage of the 24mm bottom bracket systems high-quality.Precise Bottom Bracket, Spindle and Bearing EngagementThe precise bottom bracket, spindle and bearing engagement is the foundation of DUB technology. This superb merger creates the ultimate in stiffness, reliability and performance without sacrificing weight. SRAM has set a new standard for drivetrain performance, adjustability and reliability by creating a system that is not complicated to set up and fine-tune; meaning everyone can have the highest levels of performance, without the need to spend hours in the workshop/garage.Please Note: All SRAM DUB bottom brackets are only compatible with DUB type cranksets which have a 28.99mm spindle. Other cranksets with 30mm spindles will not fit into this bottom bracket and cranksets with 24mm spindles will be too small for it.Features:Material: AluminiumCompatible Frame Standard: Birmingham Small Arms (BSA) Threaded 68/73mmCompatible Crankset Standard: SRAM DUB cranksets onlyWeight: 76gPart No: BB-DUB-BSA-A1Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM DUB BSA Bottom BracketThe SRAM DUB BSA Bottom Bracket is the single, unified replacement for both 30mm and 24mm crank spindle and bottom bracket systems. The Durable Unified Bottom Bracket (DUB) system features a 28.99mm crankset spindle/inner bearing diameter alongside incredibly lightweight BB30 bearings and a strong crank spindle with all the advantage of the 24mm bottom bracket systems high-quality.Precise Bottom Bracket, Spindle and Bearing EngagementThe precise bottom bracket, spindle and bearing engagement is the foundation of DUB technology. This superb merger creates the ultimate in stiffness, reliability and performance without sacrificing weight. SRAM has set a new standard for drivetrain performance, adjustability and reliability by creating a system that is not complicated to set up and fine-tune; meaning everyone can have the highest levels of performance, without the need to spend hours in the workshop/garage.Please Note: All SRAM DUB bottom brackets are only compatible with DUB type cranksets which have a 28.99mm spindle. Other cranksets with 30mm spindles will not fit into this bottom bracket and cranksets with 24mm spindles will be too small for it.Features:Material: AluminiumCompatible Frame Standard: Birmingham Small Arms (BSA) Threaded 68/73mmCompatible Crankset Standard: SRAM DUB cranksets onlyWeight: 76gPart No: BB-DUB-BSA-A1Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Maxle DH - FrontRockShox Maxle DH - Front Designed for the downhill crowd, this tooled version of the RockShox Maxle Lite is light, stiff and has loads of clearance. A genuine RockShox replacement DH MaxleBuy RockShox Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Can Fit Any Frame Standard The SRAM DUB bottom bracket does not introduce any new frame bottom bracket standards or specific's that must be adhered to in order to get the performance benefits. The DUB system can fit any frame standard and enables the use of the SRAM Eagle DUB cranks with these frames. More Durable & Larger Bearings Compared to 30mm (BB30) & Lighter than 24mm (GXP) The DUB system cranksets use a 28.99mm diameter spindle, which is significantly smaller than the current BB30 standard, enough to enable the use of larger bearings and substantially greater seals. On the flip side of the design adjustment, this new bottom bracket system is as durable as the superb SRAM GXP system but is also much lighter. The SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, SRAM engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket specification. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. The DUB bottom bracket system is the bearing setup from SRAM that is compatible with all frame bottom bracket standards and is compatible with SRAM DUB range or cranks. The SRAM DUB threaded bottom bracket finds the perfect balance between weight, strength and durability.
SRAM have designed the Maxle ultimate to be lightweight, reliable, extremely durable and easy to use. You can concentrate on the road ahead, knowing that your wheels are held in place by a thru-axle system that has proven itself at competition level across multiple cycling disciplines.
With their new DUB cranksets and bottom bracket standards, SRAM have upped their game, with the two products combining to create a lighter, stiffer and more durable system. SRAM's DUB Threaded Bottom Bracket fits in your standard threaded bottom shell and provides a stiffer and more durable bottom bracket compared to the competition and SRAM's own GXP design. By using a 28.99mm axle, the DUB bottom bracket offers bigger bearings than bottom brackets used for 30mm crank axles, improving durability and stiffness, as well as being lighter. The DUB system replaces SRAM's previous GXP and BB30 crank and bottom bracket systems to provide improved durability, better compatibility and a stiffer, stronger and lighter product. DUB cranks can be used with any existing bottom bracket standard when used with the appropriate DUB bottom bracket. Performance benefits aside, it also means your crank is future proofed in case you happen to swap your frame. Easy to install and highly durable, SRAM's DUB Threaded Bottom Bracket sets a new standard in durability and longevity.
With their new DUB cranksets and bottom bracket standards, SRAM have upped their game, with the two products combining to create a lighter, stiffer and more durable system. SRAM's DUB Threaded Bottom Bracket fits in your standard threaded bottom shell and provides a stiffer and more durable bottom bracket compared to the competition and SRAM's own GXP design. By using a 28.99mm axle, the DUB bottom bracket offers bigger bearings than bottom brackets used for 30mm crank axles, improving durability and stiffness, as well as being lighter. The DUB system replaces SRAM's previous GXP and BB30 crank and bottom bracket systems to provide improved durability, better compatibility and a stiffer, stronger and lighter product. DUB cranks can be used with any existing bottom bracket standard when used with the appropriate DUB bottom bracket. Performance benefits aside, it also means your crank is future proofed in case you happen to swap your frame. Easy to install and highly durable, SRAM's DUB Threaded Bottom Bracket sets a new standard in durability and longevity.
With their new DUB cranksets and bottom bracket standards, SRAM have upped their game, with the two products combining to create a lighter, stiffer and more durable system. SRAM's DUB Threaded Bottom Bracket fits in your standard threaded bottom shell and provides a stiffer and more durable bottom bracket compared to the competition and SRAM's own GXP design. By using a 28.99mm axle, the DUB bottom bracket offers bigger bearings than bottom brackets used for 30mm crank axles, improving durability and stiffness, as well as being lighter. The DUB system replaces SRAM's previous GXP and BB30 crank and bottom bracket systems to provide improved durability, better compatibility and a stiffer, stronger and lighter product. DUB cranks can be used with any existing bottom bracket standard when used with the appropriate DUB bottom bracket. Performance benefits aside, it also means your crank is future proofed in case you happen to swap your frame. Easy to install and highly durable, SRAM's DUB Threaded Bottom Bracket sets a new standard in durability and longevity.
15mm Q-loc thru axle by SR Suntour for touring forks.Key Features:Installation dimension: 15 x 100 mm,Compatible with NCX, NRX15 and NEX-E25,Weight: approx. 110 g.
Sportful Fiandre Pro Medium JacketSpring and autumn weather is hard to predict but pulling on Sportful's Fiandre Pro Medium Jacket ensures you'll be protected come what may - cycle through fickle weather in comfort. Polartec® NeoShell® x NoRainJust like the Fiandre Pro Jacket, the Fiandre Pro Medium Jacket is all about reliable protection against the elements, but with the back in mid-weight NoRain fabric, it's a touch more versatile across cool to mild temperatures. The NoRain maintains warmth but gives a boost to breathability, so milder temperatures and hard training and racing efforts won't leave you soaked in sweat. The Fiandre Pro Medium also takes full advantage of Polartec® NeoShell® to the front- this isn't just a standard 'outdoor' fabric, instead, it's designed for the very specific demands of high-intensity sports such as cycling. Not only is it incredibly good at blocking wind and rain, but it's also engineered to release excess heat and perspiration, the continuous air-exchange enhancing your natural heat regulation as your intensity rises. It's a vital characteristic to ensure you don't get cold and clammy during harder efforts. Windproof, waterproof and incredibly breathable, this is all achieved with minimal bulk too. Ergonomic EngineeringThe Fiandre Pro Medium is very much focused on the performance end of the cycle kit spectrum and with input from their Pro riders, Sportful have given it their ergonomic fit. This sees the jacket hug the body closely, reducing energy-sapping drag when battling poor weather, while careful seam placement not only enhances the fit but reduces exposure to the elements. A waterproof YKK® Vislon® zipper makes it easy to control ventilation and three large pockets to the back make space to load up essentials for a long day on the saddle. Fast riding in the changeable conditions of spring and autumn is where the Fiandre Pro Medium Jacket truly excels. It deals with sweat incredibly well, leaving you dry and comfortable, then if you're caught in a heavy rain shower, no problem, Polartec® NeoShell® has you covered.Features:Material: 51% Polyamide, 36% Polyester, 13% ElastanePolartec® NeoShell® is windproof, waterproof, highly breathable and stretchyMid-weight fabric, can be worn with a base layer or with an added thermal layer for cold conditionsStrategically placed seams optimize fit and feel on the bike while reducing exposure to elementsNoRain protection on backWaterproof YKK® Vislon® zipper3 external rear pocketsSuggested minimum temperature: 8 Degrees CBuy Sportful Cycle Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
SOLID-COLOR YOUR RIDE. The summer version of this jersey was game-changing in offering a dyed jersey to today's cycling world. Now, Monocrom is here for the winter season as well with a unique design and an outstanding thermal protection. Be a protagonist of the revolution. Also in winter time. Features: Garment dyed colors Significantly elastic fabric Silicone gripper on the waist and inside to give wearing stability 3 rear pockets Temp. Range: 15°+ C