The Covert Dropper Seatpost sets the standard for dropper posts... now available in all black. The cartridge-based system is designed to have the longest service life in the industry. If repair is needed it’s fast, affordable and simple. Every part that makes up the Covert dropper is carefully chosen and of the highest grade quality available. Custom made Norglide bearing bushings, custom made Trelleborg O-Rings and seals, Thomson saddle clamps and fasteners and Motul Oil. The Thomson Covert Black Dropper is hands down the industry standard. Hands down the industry standard. New Shifter orientated Remote Lever. (Not Included) Cartridge-based system for long service life. Custom made bushings, O-Rings, Seals, Saddle Clamps and Fasteners. Available in 65mm, 100mm, 125mm & 150mm travel options. Only 493g (30.9mm with 125mm travel).
Dropper Remote Lever for use with Thomson Dropper posts.
Our new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° backsweep and 5° upsweep. They’re built using 7050 Aluminium alloy for strength and longevity.The Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections.Together with a 35mm Thomson X4 stem, it’s the best Aluminium cockpit in the industry.Key Features: Centre Rise: 10mm, 20mm and 25mm., Backsweep: 9 degrees., Upsweep: 5 degrees., 7050 Aluminium., Butted & tapered for optimal fatigue life., Advanced Hydraulic Press forming..
Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.
Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.
Thomson s new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° back sweep and 5° upsweep. They re built using 7050 Aluminium alloy for strength and longevity.Centre Rise: 10mm, 20mm and 25mmBack sweep: 9 degreesUpsweep: 5 degrees7050 AluminiumButted & tapered for optimal fatigue lifeAdvanced Hydraulic Press formingThe Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections. Together with a 35mm Thomson X4 stem, it s the best Aluminium cockpit in the industry.
The stem that is strong enough for freestyle and light enough to race. 6 bolts up front to hold your bars no matter what.Reach: 50mmCan be flipped and run upside downWide Clamp - For Less Stress on your BarsCNC Machined from 7000 Series AluminumNew six bolt clamp
The Thomson Elite DH bar is 800mm wide with 20mm of rise, 9° of back sweep, and 5° of upsweep. It s built using 7050 Aluminium alloy for strength and long life. 65mm wide clamping area fits our Direct Mount stem, giving you the most torsional stiffness of any bar/stem combination. 31.8 centre section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems.800mm width / 31.8mm7050 Aluminium AlloyLong, straight middle sectionThickened ends from 1.4mm to 1.6mmDeveloped by Hydraulic Press FormingLow weight, high fatigue lifePerfect with Thomson Elite X4 or Direct Mount StemsWeight 325gBars are butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground. Bars are produced by advanced Hydraulic Press Forming to avoid the need for hand grinding. Almost all other bars are manually bent, and bends are ground to appear smooth. Hydraulic Press Forming ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high. Together with a Thomson stem, this is the best Aluminium cockpit you can get. It s the perfect addition to your Elite X4 Stem or Direct Mount Stem.
New in 2012 for Thomson the Direct Mount Stem allows riders the ultimate in stiffness for dual crown cockpits. The strongest stem we make, which means it’s the strongest stem you can get. Built for the Boxxer and any fork using the Boxxer bolt patternMotorcycle Style, Thomson Strength and attention to detail. Light weight and a dropped bar position. The 50mm Direct Mount puts the handlebar 10mm lower than a standard stem, and lower than an adjustable direct mount design as well. Our 40mm Direct Mount has a 30 degree rise. The crown in the picture is for display purposes and is not included with the stem
The Thomson Elite Direct Mount Stems fit forks from RockShox, Fox, Manitou and Marzocchi (2012 or newer). Three sizes are available for 31.8mm handlebars: the 40/50mm Direct Mount Drop Stem puts the handlebar 10mm lower than a standard stem and lower than an adjustable direct mount design. Thomson also offers a 50mm Direct Mount Stems with 30 degrees of rise. 65mm handlebar clamp width creates maximum torsional stiffness, which translates into better steering precision. The Direct Mount Stem is 100% American made.Fits Fox, Marzocchi, RockShox and Manitou forks31.8mm ClampAvailable in 30mm, 40mm and 50mm lengths30 degree rise option available65mm Clamp width100% American made
The Thomson Elite Direct Mount Stems fit forks from RockShox, Fox, Manitou and Marzocchi (2012 or newer). Three sizes are available for 31.8mm handlebars: the 40/50mm Direct Mount Drop Stem puts the handlebar 10mm lower than a standard stem and lower than an adjustable direct mount design. Thomson also offers a 50mm Direct Mount Stems with 30 degrees of rise. 65mm handlebar clamp width creates maximum torsional stiffness, which translates into better steering precision. The Direct Mount Stem is 100% American made.Fits Fox, Marzocchi, RockShox and Manitou forks31.8mm ClampAvailable in 30mm, 40mm and 50mm lengths30 degree rise option available65mm Clamp width100% American made
The Thomson Elite Direct Mount Stems fit forks from RockShox, Fox, Manitou and Marzocchi (2012 or newer). Three sizes are available for 31.8mm handlebars: the 40/50mm Direct Mount Drop Stem puts the handlebar 10mm lower than a standard stem and lower than an adjustable direct mount design. Thomson also offers a 50mm Direct Mount Stems with 30 degrees of rise. 65mm handlebar clamp width creates maximum torsional stiffness, which translates into better steering precision. The Direct Mount Stem is 100% American made.Fits Fox, Marzocchi, RockShox and Manitou forks31.8mm ClampAvailable in 30mm, 40mm and 50mm lengths30 degree rise option available65mm Clamp width100% American made