The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
The Thomson Elite DH bar is 800mm wide with 20mm of rise, 9° of back sweep, and 5° of upsweep. It s built using 7050 Aluminium alloy for strength and long life. 65mm wide clamping area fits our Direct Mount stem, giving you the most torsional stiffness of any bar/stem combination. 31.8 centre section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems.800mm width / 31.8mm7050 Aluminium AlloyLong, straight middle sectionThickened ends from 1.4mm to 1.6mmDeveloped by Hydraulic Press FormingLow weight, high fatigue lifePerfect with Thomson Elite X4 or Direct Mount StemsWeight 325gBars are butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground. Bars are produced by advanced Hydraulic Press Forming to avoid the need for hand grinding. Almost all other bars are manually bent, and bends are ground to appear smooth. Hydraulic Press Forming ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high. Together with a Thomson stem, this is the best Aluminium cockpit you can get. It s the perfect addition to your Elite X4 Stem or Direct Mount Stem.
The Thomson Carbon Riser Handlebar is 750mm wide, offering 15mm of rise together with a 8° back sweep and 5° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for all mountain/trail riding and light enough for racing.Centre Rise: 15mmBack sweep: 8 degreesUpsweep: 5 degreesToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceWeight: 215gThe bars are made with three different fibre types with different tensile strength and tensile modulus, including high strength carbon fibres. This helps to allocate stiffness and flex where needed. The bars are moulded with an EPS mandrel inside to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflated nylon bladders. All carbon fibre material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibres from shortening the bar or impact with the ground. With a lightweight and precision tolerance clamp sections, it s the best bar for your Thomson X4 stem. It s also certified to EN, tested to DIN+.
Identical in alloy and construction to Thomson s Downhill bar, the new Trail bar is 750mm wide with 20mm of rise, 8° of back sweep, and 5° of up sweep. The clamping area is 50mm, allowing a different bend profile for a more compliant ride. The Trail bar gives you a light Aluminium all-around bar for your Mountain Bike.750mm width / 31.8mm7050 Aluminium AlloyVery durable and extremely strongThickened ends from 1.4 to 1.6mmDeveloped by Hydraulic Press FormingLightweightPerfect addition to Thomson's Elite X4 Stem or Direct Mount Stem
Thomson s aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths148mm Drop89mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm.
Thomson s aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths148mm Drop89mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm.
Thomson s aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths148mm Drop89mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm.
Thomson s aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths148mm Drop89mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm.
Aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths147mm Drop72mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm.
Aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths147mm Drop72mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm.
Aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths147mm Drop72mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm.