e*spec wheels use a custom hub that increased dynamic load ratings by 53%, and decreased axle deflection by 37%. Mechanicsm is triple-sealed, and uses a steel axle w/pinch bolt to decrease deflection.All of our e*spec wheels can be used on any regular non-eBike. Wheelsets can be mixed or matched for either full 27.5+, full 29, or jump on the #mulletbus. Key Features: Axle: 110 x 15mm (Boost),Drilling: 28h,Included: Material: 6069 Aluminum, Spokes/Nipples: Custom J-bend, triple-butted spokes w/alloy nipples and nipple washers,Width: 35mm internal width.
The Vario™ Infinite Dropper Post is the newest addition to our component line. It uses a proven, gas-charged spring allowing infinitely-adjustable travel, and requires 20% less compression force than the competition. Our unique upper bushing allows travel adjustments in 5mm increments to a 30mm maximum. Travel adjust is tool-free, no need to even remove the post from the bike.The Vario™ Post showcases an all-new 3D forged stanchion with integrated head, which increases stiffness and enhances durability upon any unexpected hits to the saddle. As bikes become more aggressive, saddle and dropper post hardware must accommodate slacker seat angles – We designed the new Vario™ Infinite Dropper with an extra 12mm of fore/aft saddle adjustment and 28° of total seat angle adjustment.Compatibility: All frames with internal cable routing for dropper seatposts.Features: Infinite travel gas spring 3D forged stanchion with integrated head Extra 12mm of fore/aft saddle adjustment 28° seat angle adjustment Tool free travel adjustments in 5mm +/- Cable actuatedIncluded: Vario dropper seatpost and owners manual Lever Sold SeparatelyTotal overall adjustments can be made in +/- 5mm increments with a max total of 30mm.Gas charged spring allows for infinite travel within desired limits./p>Weight: 30.9 120-150mm: 550g,30.9 150-180mm: 597g,31.6 120-150mm: 571g,31.6 150-180mm: 618g.
E Thirteen XCX Race Mountain Carbon CranksetThis mountain bike crankset features a 30mm spindle, APS preload adjuster, and self-extractor for bringing class-leading performance to your favourite trails. Engineered for wherever your next mountain bike (MTB) adventure takes you, this model is equipped with compression moulded carbon fibre crankarms for a fantastic balance of stiffness and durability without adding any unnecessary excess grams to your ride. Another benefit of its carbon build is it delivers excellent strength when climbing, and when it's time to descend you'll not have to worry about any weight holding you back. e.thirteen has also combined their years of World Cup racing experience and using a patented process, to make this one of the lightest production carbon crankset on the market, weighing in at only 360g without a chainring - sub 400g with a chainring.Please note: Compatible bottom brackets and chainrings are available separately.Features: Crankarm Material: Compression moulded Carbon Fibre Spindle Material: Aluminium Use: MTB Spindle: Width: 73mm; Diameter: 30mm, Interface P3 Connect Chainring: e.thirteen Direct Mount -5mm Offset Chainring (chainrings sold separately) Q-Factor: 172mm Self Extractor: Yes APS Preload Adjuster: Yes Chainline: 73mm Spindle: Boost (52mm) chainline with UL Chainring; 73mm Spindle: Non-Boost (49mm) chainline with a -8mm Offset Chainring Chainring Compatibility: UL Chainring, and SL Chainring (chainrings sold separately) Bottom Bracket Compatibility: 30mm PressFit Bottom Brackets, and Threaded Bottom Brackets (bottom brackets sold separately) Weight: 360g (approx without chainring)Manufacturer's Part Numbers: E13CR2004 Black 170 x 73mm E13CR2005 Black 175 x 73mmBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen XCX Race Mountain Carbon CranksetThis mountain bike crankset features a 30mm spindle, APS preload adjuster, and self-extractor for bringing class-leading performance to your favourite trails. Engineered for wherever your next mountain bike (MTB) adventure takes you, this model is equipped with compression moulded carbon fibre crankarms for a fantastic balance of stiffness and durability without adding any unnecessary excess grams to your ride. Another benefit of its carbon build is it delivers excellent strength when climbing, and when it's time to descend you'll not have to worry about any weight holding you back. e.thirteen has also combined their years of World Cup racing experience and using a patented process, to make this one of the lightest production carbon crankset on the market, weighing in at only 360g without a chainring - sub 400g with a chainring.Please note: Compatible bottom brackets and chainrings are available separately.Features: Crankarm Material: Compression moulded Carbon Fibre Spindle Material: Aluminium Use: MTB Spindle: Width: 73mm; Diameter: 30mm, Interface P3 Connect Chainring: e.thirteen Direct Mount -5mm Offset Chainring (chainrings sold separately) Q-Factor: 172mm Self Extractor: Yes APS Preload Adjuster: Yes Chainline: 73mm Spindle: Boost (52mm) chainline with UL Chainring; 73mm Spindle: Non-Boost (49mm) chainline with a -8mm Offset Chainring Chainring Compatibility: UL Chainring, and SL Chainring (chainrings sold separately) Bottom Bracket Compatibility: 30mm PressFit Bottom Brackets, and Threaded Bottom Brackets (bottom brackets sold separately) Weight: 360g (approx without chainring)Manufacturer's Part Numbers: E13CR2004 Black 170 x 73mm E13CR2005 Black 175 x 73mmBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
e*spec wheels use a custom hub that increased dynamic load ratings by 53%, and decreased axle deflection by 37%. Mechanicsm is triple-sealed, and uses a steel axle w/pinch bolt to decrease deflection.All of our e*spec wheels can be used on any regular non-eBike. Wheelsets can be mixed or matched for either full 27.5+, full 29, or jump on the #mulletbus. Key Features: Axle: 110 x 15mm (Boost),Drilling: 28h,Included: Material: 6069 Aluminum, Spokes/Nipples: Custom J-bend, triple-butted spokes w/alloy nipples and nipple washers,Width: 35mm internal width.
Coming equipped with two compacted carbon fibre crankarms, this mountain bike (MTB) crankset, offers a superior strength to weight ratio as you weave your way from trail to trail. Its carbon build delivers increased stiffness and strength, without adding any unnecessary excess grams to your ride. e.thirteen has also kitted out this model with an additional 3K carbon finish that's added to the front and rear faces for greater impact resistance. Carbon MTB Crankset with Adjustable Chainline World Cup proven for years, and in contrast to e.thirteen's Gen3 carbon cranks, the Q Factor, overall profile, and volume of these Gen4 cranks has been greatly reduced. The spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance. Its adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor. Manufacturer's Part Number: E13CR2007 Black 165 x 73mm E13CR2008 Black 170 x 73mm E13CR2009 Black 175 x 73mm
E Thirteen LG1 Race Carbon CranksetThis mountain bike (MTB) crankset features two compacted carbon fibre crankarms for a superior strength to weight ratio as you weave your way from trail to trail. Its carbon build also delivers increased stiffness and strength, without adding any unnecessary excess grams to your ride. Another highlight is e.thirteen has kitted out this model with an additional 3K carbon finish that's added to the front and rear faces for greater impact resistance.Carbon MTB Crankset with Adjustable ChainlineWorld Cup proven for years, and in contrast to e.thirteen's Gen3 carbon cranks, the Q Factor, overall profile, and volume of these Gen4 cranks has been greatly reduced. The spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance. Its adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor.Features: Crankarm Material: Carbon Fibre with 3K finish Use: MTB Spindle: Width: 73mm; Diameter 30mm, Interface P3 Connect Compatibility: All frames with 73mm BB shell Compatible Chainring: SL Chainring (-8mm offset) Number of Chainrings: 1 Included: Crankset, APS Adjuster, Installation Tools, Crank Boots (x2), Sticker, User Manual Bottom Bracket Included: No, available separately Chainring Included: No, available separatelyManufacturer's Part Number: E13CR2007 Black 165 x 73mm E13CR2008 Black 170 x 73mm E13CR2009 Black 175 x 73mmBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
e*spec wheels use a custom hub that increased dynamic load ratings by 53%, and decreased axle deflection by 37%. e*spec hubs still have 6-degree engagement, but use an outboard bearing to better support the driver body and disperse loads. Mechanicsm is triple-sealed, and uses a steel axle w/pinch bolt to decrease deflection.All of our e*spec wheels can be used on any regular non-eBike. Wheelsets can be mixed or matched for either full 27.5+, full 29, or jump on the #mulletbus. Key Features: Engagement:6 Degree,Freehub Mount: XD Drive,Hub: e*spec rear hub, specially designed for eBike use.,Axle: Steel axle w/pinch bolt,Included: tubeless tape, tubeless valve, spoke x3, nipple x3, nipple washer x3, 15mm endcaps,Spokes/Nipples: Custom J-bend, triple-butted spokes w/alloy nipples and nipple washers,Axle: 148 x 12mm,Drilling: 28h,Material: Aluminium 6069,Width: 35mm internal width.
World Cup proven for years, and in contrast to our Gen3 carbon cranks, the Q Factor, overall profile, and volume of our Gen4 cranks has been greatly reduced. Spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance.The adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor.Smaller Q Factor, overall profile and volume. Spindle on non-drive side for easier chainguide setup and drivetrain maintenance. Adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. 8mm self-extractor. Key Features: Non-Boost, Boost, SuperBoost,Included APS Adjuster, Installation Tools, Crank Boots (x2), Sticker, User Manual,World-Cup DH-rated layup and construction, compacted carbon fiber, with additional 3k added to front and rear faces of crank for impact resistance,Width 73mm, Diameter 30mm, Interface P3 Connect™.
Lightweight, 30mm spindle, APS preload adjuster, and self-extractor bring the class-leading combo to your door. Crank boots included. Key Features: Lightest production crankset on market with ultra-lightweight carbon fiber crankarms, 30mm spindle,and APS adjuster.,73mm spindle,Compression molded carbon fiber arms, aluminum spindle,Spindle: Width 73mm, Diameter 30mm, Interface P3 Connect™,Q FACTOR: Mountain: 172mm,Chainline : 73mm Spindle: Boost (52mm) chainline w/UL Chainring,73mm Spindle: Non-Boost (49mm) chainline with a -8mm Offset Chainring,. Compatibility: Chainrings: UL Chainring, and SL Chainring, Bottom Brackets: 30mm PressFit Bottom Brackets, and Threaded Bottom Brackets.
Born out of a strong Downhill racing heritage, our LG1 Enduro wheels are ready for anything you can throw at them. All-aluminium hubs maximize durability, wide flange and bearing structure provides a strong and nearly dishless wheel build, and 30mm inner width rims provide the perfect platform for tyres 2.3-2.6" wide. Long-term durability built in a way that won't break the bank. Tubeless ready with tape and valves installed.Front Wheel:Axle: 110 x 15mm (Boost),Rim: 30mm internal width, 6061 aluminium, Sleeved, hookless, 28h,Included: Tubeless tape, tubeless valve, spoke x3, nipple x3, nipple washer x3, 15mm front endcaps,Spokes/Nipples: Custom Hive double-butted black steel spokes, brass nipples, nipple washers (x28),.Rear Wheel:Axle: 148 x 12mm,Drilling: 28h,Tubeless ready with tape and valves installed.,Engagement:6 Degree,Freehub Mount: Sram XD Drive,Hub: Triple-sealed, fully machined aluminium hub w/6 degree engagement.,Rim: 30mm internal width, 6061 aluminium, Sleeved, hookless, 28h,Included: tubeless tape, tubeless valve, spoke x3, nipple x3, nipple washer x3, 15mm endcaps,Spokes/Nipples: Custom Hive double-butted black steel spokes, Brass nipples, nipple washers (x28).
e*spec wheels use a custom hub that increased dynamic load ratings by 53%, and decreased axle deflection by 37%. e*spec hubs still have 6-degree engagement, but use an outboard bearing to better support the driver body and disperse loads. Mechanicsm is triple-sealed, and uses a steel axle w/pinch bolt to decrease deflection. Key Features: Engagement:6 Degree,Freehub Mount: XD Drive,Hub: e*spec rear hub, specially designed for eBike use.,Axle: Steel axle w/pinch bolt,Included: tubeless tape, tubeless valve, spoke x3, nipple x3, nipple washer x3, 15mm endcaps,Spokes/Nipples: Custom J-bend, triple-butted spokes w/alloy nipples and nipple washers,Axle: 148 x 12mm,Drilling: 28h,Material: Aluminium 6069,Width: 30mm internal width.