Featuring a lightweight and ventilated 3 layer back protector which conforms to Level 1 (1621-2) standards, the Air+ Tee utilizes a flexible mesh, which is both light and highly breathable, in combination with the low profile back protector.Key Features:Light, three quarter, 3ply back protector with superb shock absorption.,Mesh back for good ventilation.,Certified EN 1621-2 3ply sheet back plate.,Elastic mesh for optimal fit, with an optional adjustablewaist strap providing further fit personalization.,Incorporates low profile sleeve and chest comfort pads.,Reinforced fabric on elbow, and a silicon strip at the bottom of elbow to secure in place.,Perforated for optimized moisture and ventilation control..
The Oseus VPD Tee gives the highest level of protection for modern riders on bikes capable of anything. Ideal for downhill and bike park use, the short-sleeved armour gives full torso and shoulder protection, and thanks to clever placement of the zip, there's no break in protection across the front of the chest. Constructed from a soft and flexible fabric, the tee can be worn next to the skin for absolute protection. A zip on the side ensures there is no need for a break in protection on the chest, so that the back, chest and ribs are all be fully protected. The thicker protectors are ventilated for comfort and are fully flexible for exceptional freedom of movement. Wicking materials and a 3D mesh move moisture away from the body, keeping you dry and comfortable. Storage pockets are included on the back, including one secure zipped pocket for a lift pass.Product Details:Oseus VPDA thicker yet highly flexible and well-ventilated protector certified to the toughest standards.Complete torso protectionPads cover the chest, back and shoulders.Zip-free chestA single VPD plate covers the whole chest; there's no break in protection for a zip.Side zippersZippers on each side from the waist to the underarm make it easier to get the tee on and off.3D MeshA 3D mesh material enhances ventilation.Wicking fabricsAllow moisture to move away from the body for dryness and comfort.Rear storage pocketsZipped card pocketHanger loop
Designed specifically for e-Bikes and longer wear, our steel e-Rings are cold forged from 4130 high-grade steel with a nice black oxide finish.Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring – going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.PLEASE NOTE: Chainring bolts are NOT included.• STEEL eRING FOR eBIKES 104 BCD | 32 – 36T• These e-rings are ‘female‘ threaded. Male M8 CR bolt threads into ring for motor clearance.• Wave™ Tech tooth profile | 10/11/12sp Shimano/KMC/SRAM• Cold forged 4130 grade steel | Black Oxide coating• REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2• In very rough terrain, or just for pure security, we still recommend use of an upper guide
Designed specifically for e-Bikes and longer wear, the Praxis Works steel e-Rings are cold forged from 4130 high-grade steel with a nice black oxide finish. Licensed and developed in conjunction with Mountain Racing Products, the Wave pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave design also wears more slowly than competing designs by spreading the load over larger surface areas.PLEASE NOTE: Chainring bolts are NOT included.Steel eRing for eBikes Female threadWave TechCold-Forged 4130 SteelMust use 'Clutch' style Derailleur10, 11 & 12 Speed compatible
Designed specifically for e-Bikes and longer wear, the Praxis Works steel e-Rings are cold forged from 4130 high-grade steel with a nice black oxide finish. Licensed and developed in conjunction with Mountain Racing Products, the Wave pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave design also wears more slowly than competing designs by spreading the load over larger surface areas.PLEASE NOTE: Chainring bolts are NOT included.Steel eRing for eBikes Female threadWave TechCold-Forged 4130 SteelMust use 'Clutch' style Derailleur10, 11 & 12 Speed compatible
Designed specifically for e-Bikes and longer wear, the Praxis Works steel e-Rings are cold forged from 4130 high-grade steel with a nice black oxide finish. Licensed and developed in conjunction with Mountain Racing Products, the Wave pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave design also wears more slowly than competing designs by spreading the load over larger surface areas.PLEASE NOTE: Chainring bolts are NOT included.Steel eRing for eBikes Female threadWave TechCold-Forged 4130 SteelMust use 'Clutch' style Derailleur10, 11 & 12 Speed compatible
Di2 battery mount for installing SM-BTR2 battery into fork steerer tubeTo be used in conjunction with Tharsis XC compatible stems and handlebars
Compact cutting guide suitable for fork steerer tubes and handlebarsHardened steel construction for maxium rigidity and a long service life
Key Features:Headset expansion nut for carbon steerer tubes.,25mm long for 1 1/8" steerer tubes.,Includes UD carbon topcap with alloy bolt.
Features:Compact cutting guide suitable for fork steerer tubes and handlebars,Hardened steel construction for maxium rigidity and a long service life.
3D forged 6061-T6 aluminium stem combined with a 4-bolt faceplate gives increased stiffness in a simple, elegant, lightweight design17 degree rise - can be run in the negative or positive position,Weight: 128 gram.
REFLECT360 Carbon Technology is the perfect balance between full visibility in low light conditions and a subtle, contemporary look in daylight. The REFLECT360 Carbon print has been specially designed to move with the stretch of the fabric without restricting the runner?s movement. Placed strategically on the shoulders and arms to give you multi-directional reflectivity. The integrated reflective glass beads help reflect vehicle lights and makes it easier for drivers to identify your position further in advance. This all-season t-shirt is a versatile option that can be worn next-to-skin or over a baselayer in cooler conditions. The main fabric is a soft-touch, lightweight polyester/elastane blend offers 4-way stretch to allow for freedom of movement. The rear mesh fabric offers superb moisture management and breathability.