Hope Road Stainless Steel Bottom BracketThe eagerly anticipated road specific external bottom bracket is now available. The machined aluminium cups hold full stainless steel cartridge bearings.These custom, Swiss made bearings are double sealed, fully serviceable and removable which gives a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Hope use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.Features: External bottom bracket designed for threaded bottom brackets The machined aluminium cups hold either stainless steel cartridge bearings or ceramic bearings in stainless races Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Cartridge bearings are replaceable Designed to suit 24mm crank axles Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Stainless Steel Bottom Bracket BearingGenuine replacement bearing for Hope Bottom brackets using a 24mm axle. These are constructed with stainless steel cups and 2x rubber sealsFeatures:Size: 24mm (Inner Diameter) x 37mm (Outer Diameter) x 7mm (Depth)Material: Stainless SteelSeals: 2x Rubber SealQuantity: 1 Bearing
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Blank Tyro BMX BikeThe Blank Tyro is Blanks first full size 20" BMX in the range and is engineered to provide superb stability, comfort and control. This value for money ride comes with 25/9T gearing, 8.75" handlebars and fat 2.3" tyres, giving you confidence-inspiring performance at your local street spots, skatepark or dirt jump trails.Features: Frame: New Blank 'Geometry' 1020 Hi Ten, 20.4" Top Tube Forks: Blank Compound 20" 'Tapered' 30mm Offset Forks Brake: Rear 990 Alloy Style U-Brake Cable: Slic Cable Brake Levers: Resin And Alloy Combo Chainwheel: Blank 'Wtf 2' Sprocket 25t Steel Freewheel: 9t Chain: S410 Headset: 1-1/8" External Crank: Blank 1pc Hot Forged 170mm Bottom Bracket: USA Rims: Blank 20" 36 Hole Alloy Front Hub: 10mm Open Bearing Steel Rear Hub: 10t 10mm Open Bearing Cassette Tyres: 20" X 2.3" Seat: Blank Combo 'Faux Leather' Seat Handlebars: Blank Compound 8.75" Bars Handlebar Stem: Blank Compound 55mm Frontload Stem Grips: Blank 'Mushroom' Style Flangeless Pedal: Plastic Freestyle PedalsPlease note: this bike is for use on BMX tracks and skate parks. In many countries, it is illegal to use this bike on public roads without using the two independent braking systems provided (a front and rear brake).Buy Blank Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen Base Flat PedalThis flat pedal is ready for the demands of modern mountain bike (MTB) trail riding and delivers biting traction at a price point that doesn't hurt. Its hard-wearing composite body provides a fantastic balance of strength and durability, while keeping its weight reduced to a minimum. e.thirteen has also kitted it out with a heat-treated steel spindle for extra toughness as you weave your way from trail to trail.22 Pin MTB PedalsDrawing from the pin layout on e.thirteen's first LG1 Plus and LG1 Race pedals, the Base composite pedals use the exact same 22-pin pattern in order to achieve the same biting traction e.thirteen's first pedals were so well known for. The 100x110mm composite platform houses 22 pins (11 per side), an inboard bushing + outboard bearing, and steel axle. This combination spins smooth and is designed to increase longevity. Sold as a pair.Features: Pedal Material: Composite Axle Material: Steel Spindle Material: Heat-treated Steel Use: MTB Platform Size: 100x110mm Axle System: Bearing and bushing axle system Pins: 22-pin design, 6mm tall Included: 22 replacement 4mm tall pins Single or Pair: Pair Weight: 388gManufacturer's Part Numbers: E13PE2001 Black 9/16" E13PE2002 Bright Red 9/16"Buy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen LG1 Race Carbon CranksetThis mountain bike (MTB) crankset features two compacted carbon fibre crankarms for a superior strength to weight ratio as you weave your way from trail to trail. Its carbon build also delivers increased stiffness and strength, without adding any unnecessary excess grams to your ride. Another highlight is e.thirteen has kitted out this model with an additional 3K carbon finish that's added to the front and rear faces for greater impact resistance.Carbon MTB Crankset with Adjustable ChainlineWorld Cup proven for years, and in contrast to e.thirteen's Gen3 carbon cranks, the Q Factor, overall profile, and volume of these Gen4 cranks has been greatly reduced. The spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance. Its adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor.Features: Crankarm Material: Carbon Fibre with 3K finish Use: MTB Spindle: Width: 73mm; Diameter 30mm, Interface P3 Connect Compatibility: All frames with 73mm BB shell Compatible Chainring: SL Chainring (-8mm offset) Number of Chainrings: 1 Included: Crankset, APS Adjuster, Installation Tools, Crank Boots (x2), Sticker, User Manual Bottom Bracket Included: No, available separately Chainring Included: No, available separatelyManufacturer's Part Number: E13CR2007 Black 165 x 73mm E13CR2008 Black 170 x 73mm E13CR2009 Black 175 x 73mmBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
E Thirteen Helix 12 Speed Cassette ClusterBuilt for the demands of modern mountain biking, this model offers a highly durable and dependable build for tackling every obstacle that the trail throws at you. It's in e.thirteen's DNA to solve problems and that's why they created the Helix R 12 speed cassette cluster. It's available in several different finish options which feature a tough aluminium construction, as well as a nickel finish option that's exclusively made of steel.Future-Proof Your Bike with e*thirteen HelixThe Helix R 12 Speed Cassette is an upgrade to any SRAM Eagle or Shimano drivetrain, with more range than any other cassette on the market. The 9 tooth cog lets you step down one chainring size while keeping the same top-end gearing and provides not only better ground clearance, but an overall lighter drivetrain.Unlike SRAM Eagle, Helix R cassettes have replaceable gear clusters. That means ongoing service and replacement costs will be less than half that of SRAM cassettes. As an added bonus, Helix R 12 speed clusters are backward compatible with and can be used to upgrade your existing TRS+ 9-50 cassette.When installing the Helix R cassette, as with any cassette, e.thirteen recommends checking chain wear. If your chain shows 0.5% or more wear, you will significantly decrease the wear life of your new cassette. Installing a new chain with your new cluster is a much better and economical solution.The Intergalactic 42-50t cluster features PVD finishing that is twice as durable as anodised models.Please note: This product is a replacement cassette cluster and is available in different sizes. Please choose from the menu the option that matches your drivetrain.Features: Cluster Material: Aluminium (Except Nickel option which is Steel) Use: MTB Speed: 12 speed Ratio: Multiple options available to selectTechnologies: Compatibility: The Helix R 12-Speed Cassettes work flawlessly with Shimano and SRAM 12 speed drivetrains, despite the challenges in designing for the different cog spacing and chain behaviour. Performance: The improved performance of the Helix cassette features great Shimano 12 speed shifting performance and improved reliability of steel and aluminum assembly. The Intergalactic PVD finishing is twice as durable as anodised models. And it is 60g lighter. Cost Savings: The aluminium one-piece 42/50 tooth cluster is easily replaceable so riders can keep their steel cluster for multiple seasons and freshen up as needed without buying a whole new cassette. More Range: 556% more range. Durable and Serviceable: Helix R features replaceable gear clusters and intergalactic PVD finishing. Low Weight: Lighter than both XTR and XX1.Buy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Outland DriRelease Short Sleeve Tech T-ShirtCasual style with stacks of performance! While this stylish Outland DriRelease® Short Sleeve Tech T-Shirt looks fabulous off the bike it's also got all the performance you need for on the bike duties too. From the bike to the bar in one fell swoop.Why choose DriRelease®?DriRelease® technology keeps customers cool, dry, fresh and comfortable in high-performance sportswear. The comfort of DriRelease® fabrics used for this Nukeproof T-shirt is not from chemical finishes but instead built into each thread meaning the benefits are absolutely permanent and much more eco-friendly. It will not wash out over time. The brilliance of DR fabrics is the engineered combination of hydrophobic and hydrophilic fibres that allow them to engage with moisture naturally to dramatically improve how wetness is pulled from the skin and released into the air.In a nutshell, the Outland DriRelease® Tech T-Shirt combines the most important elements of any high performance riding jersey while keeping a soft cotton-like casual feel. Naturally odour resistant and ideal for a long day of fun summer riding. Screen printed graphics give the Tech T-Shirt’s striking good looks. Not only will you look good, but you'll also feel good too, thanks to this excellent moisture management technology keeping you dry and fresh even when riding hard.Features:Materials: 88% Polyester, 12% CottonDriRelease® yarns wick moisture, dry quickly and neutralize odoursCrew neck and casual cut, suitable for on and off the bikeDropped hem at back for extra coverageScreen printed graphicsNukeproof branded trimsBuy Nukeproof Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Outland DriRelease Short Sleeve Tech T-ShirtCasual style with stacks of performance! While this stylish Outland DriRelease® Short Sleeve Tech T-Shirt looks fabulous off the bike it's also got all the performance you need for on the bike duties too. From the bike to the bar in one fell swoop.Why choose DriRelease®?DriRelease® technology keeps customers cool, dry, fresh and comfortable in high-performance sportswear. The comfort of DriRelease® fabrics used for this Nukeproof T-shirt is not from chemical finishes but instead built into each thread meaning the benefits are absolutely permanent and much more eco-friendly. It will not wash out over time. The brilliance of DR fabrics is the engineered combination of hydrophobic and hydrophilic fibres that allow them to engage with moisture naturally to dramatically improve how wetness is pulled from the skin and released into the air.In a nutshell, the Outland DriRelease® Tech T-Shirt combines the most important elements of any high performance riding jersey while keeping a soft cotton-like casual feel. Naturally odour resistant and ideal for a long day of fun summer riding. Screen printed graphics give the Tech T-Shirt’s striking good looks. Not only will you look good, but you'll also feel good too, thanks to this excellent moisture management technology keeping you dry and fresh even when riding hard.Features:Materials: 88% Polyester, 12% CottonDriRelease® yarns wick moisture, dry quickly and neutralize odoursCrew neck and casual cut, suitable for on and off the bikeDropped hem at back for extra coverageScreen printed graphicsNukeproof branded trimsBuy Nukeproof Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.