The Kachinsky Team is an Intermediate level bike from GT and is the perfect first bike if you are looking for a solid high spec bike at good value. The frame uses a Chromoly front triangle for added strength, Chromoly steertube tapered forks, Sealed bearings throughout as well as a GT Padded Signature pivotal seat and post, GT LP-5 tyres and Soft compound Grips. ###section### Product Specs FRAME MATERIAL: Chromoly Front Triangle & Chainstays WHEEL SIZE: 20" TOP TUBE LENGTH: 20.75" CHAIN STAY LENGTH: 13.2" HEADTUBE ANGLE: 75° SEAT TUBE ANGLE: 71° FORKS: 100% Cro-Mo 2pc. Threaded Steerer & Tapered Legs, 31mm OffSet, 3/8”Axle Dropouts BARS: GT Freestyle 4pc., Steel, 9.125”H x 29”W, 5° Up, 9° Back STEM: GT Top Load, 1-1/8”, Cold Forged Cap, 32mm Rise, 50mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Aluminum U-Brake w/ Soft Compound Pad FRONT HUB: Alloy Body, Sealed Bearings, 36h, 3/8” x 17mm Female Bolt FRONT RIM: Alloy Single Wall, 36h REAR HUB: Alloy Body, 5pcs Sealed Bearings, Cr-Mo 14mm x 165mm Axle, 9TCassette, 36h, 17mmNut REAR RIM: Alloy Double Wall, 36h TYRES: GT Pool 20x2.3” SPROCKET: GT 25T Steel Chainwheel CRANKS: GT Power Series Seamless Tubular Cr-Mo 3pc., 170mm Arms BB: Sealed Mid PEDALS: GT Low Profile FS Platform Design SEAT: GT BK Signature Pivotal Padded GEARING: 25/9 WEIGHT: TBC ###section### Product Highlights Great for riders who are between 5ft and 6ft tall (150cm - 180cm) A great all rounder suitable for any type of riding Strong Lightweight Chromoly Front Triangle & Chainstays Sealed Bearings All Round Strong Lightweight 3 Piece Chromoly Cranks ###shogun-image-section###
The Mercado Team Comp is an Intermediate level bike from GT and is the perfect bike to upgrade from an entry level bike. It's spec'd really well with fully sealed bearings throughout, Chromoly front triangle frame, chromoly fork & handlebars, double wall rims, GT LP-5 tyres, pivotal GT Padded seat and post and much more. ###section### Product Specs FRAME MATERIAL: Chromoly Front Triangle & Chainstays WHEEL SIZE: 20" TOP TUBE LENGTH: 20.75" CHAIN STAY LENGTH: 13.7" HEADTUBE ANGLE: 75° SEAT TUBE ANGLE: 71° FORKS: 100% Cro-Mo 1pc. Threaded Steerer & Tapered Legs, 31mm OffSet, 3/8”Axle Dropouts BARS: GT Freestyle 2pc. 100% Cr-Mo, 9”H x 29”W, 3°Up, 11°Back STEM: GT Top Load, 1-1/8”, Cold Forged Cap, 32mm Rise, 50mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Aluminum U-Brake w/ Soft Compound Pad FRONT HUB: Alloy Body, Sealed Bearings, 36h, 3/8” x 17mm Female Bolt FRONT RIM: Alloy Double Wall, 36h REAR HUB: Alloy Body, 5pcs Sealed Bearings, Cr-Mo 14mm x 165mm Axle, 9TCassette, 36h, 17mmNut REAR RIM: Alloy Double Wall, 36h TYRES: GT LP-5 20x 2.35” SPROCKET: GT 25T Alloy Chainwheel CRANKS: GT Power Series Seamless Tubular Cr-Mo 3pc., 170mm Arms BB: Sealed Mid PEDALS: GT Low Profile FS Platform Design SEAT: GT Pivotal Padded GEARING: 25/9 WEIGHT: TBC ###section### Product Highlights Great for riders who are between 5ft and 6ft tall (150cm - 180cm) A great all rounder suitable for any type of riding Strong Lightweight Chromoly Front Triangle & Chainstays Sealed Bearings All Round Strong Lightweight 3 Piece Chromoly Cranks ###shogun-image-section###
Brian Kachinsky has an all-out, high-speed technical approach to his riding on park and street and because of this has become one of the most well known riders in BMX. GT have created the Team BK range with his riding in mind so the bikes are spec'd to a high standard that you can rely on. Features include a chromoly front triangle frame, Chromo Forks and Bars, Fully sealed bearings throughout, Chromoly 3pc cranks. For the money it's hard to find a better equipped complete bike! ###section### Product Specs FRAME MATERIAL: Chromoly Front Triangle & Chainstays WHEEL SIZE: 20" TOP TUBE LENGTH: 20.75" CHAIN STAY LENGTH: 13.7" HEADTUBE ANGLE: 75° SEAT TUBE ANGLE: 71° FORKS: 100% Cro-Mo 1pc. Threaded Steerer & Tapered Legs, 31mm OffSet, 3/8”Axle Dropouts BARS: GT Freestyle 4pc. 100%Cr-Mo, 9.125”H x 29”W ,5° Up, 9° Back STEM: GT Top Load, 1-1/8”, Cold Forged Cap, 32mm Rise, 50mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Aluminum U-Brake w/ Soft Compound Pad FRONT HUB: Alloy Body, Sealed Bearings, 36h, 3/8” x 17mm Female Bolt FRONT RIM: Alloy Double Wall, 36h REAR HUB: Alloy Body, 5pcs Sealed Bearings, Cr-Mo 14mm x 165mm Axle, 9TCassette, 36h, 17mmNut REAR RIM: Alloy Double Wall, 36h TYRES: GT LP-5 20x 2.35” SPROCKET: GT 25T Steel Chainwheel CRANKS: GT Power Series Seamless Tubular Cr-Mo 3pc., 170mm Arms BB: Sealed Mid PEDALS: GT Low Profile FS Platform Design SEAT: GT Pivotal Padded GEARING: 25/9 WEIGHT: TBC ###section### Product Highlights Great for riders who are between 5ft and 6ft tall (150cm - 180cm) A great all rounder suitable for any type of riding Strong Lightweight Chromoly Front Triangle & Chainstays Sealed Bearings All Round Strong Lightweight 3 Piece Chromoly Cranks ###shogun-image-section###
Taking inspiration from the pro team the Team Comp models are spec’d to push the limits even further. Equipped with a Cr-Mo front triangle and chainstay frame and Cr-Mo 1pc threaded steerer tube fork. Rolling on durable double wall rims front and rear and a female axle sealed front hub allowing you to session with confidence. Model Name Conway Team Comp Frame Cr-Mo Front Tri (T/T D/T S/T) & Chainstays DT Gusset MID BB Seat Stay Mounted U-Brake Integrated 1-1/8' H/T w/ Removable Rotor Tabs Odyssey Springfield Brake compatible Fork Cr-Mo 1pc. Threaded Steerer & Tapered Legs 31mm Offset 3/8' Axle Dropouts Rims Alloy Double Wall 36h Spokes Stainless Steel 14g Pedals GT Low Profile FS Platform Design PP Material Cr-Mo Axle Crank GT Power Series Cr-Mo 3pc. 170mm Arms 19mm x 8T Cr-Mo Spindle GT 5mm 25T Alloy Chainwheel Bottom Bracket MID Sealed Bearing Chain KMC S1 Rear Cogs 9T Sealed 1pc. Driver Handlebar GT Freestyle 4pc. 100% Cr-Mo 9.875'H x 29'W 5°Up 9° Back Grips GT Super Soft 155mm Single Compound w/ GT removable plug Stem GT Top Load 1-1/8' Cold Forged Cap 32mm Rise 50mm Headset 1 1/8' Integrated Design 45X45 Degree Sealed Bearings Brakes Aluminum U-Brake w/ Soft Compound Pad Brake Levers Hinged Alloy Saddle GT Pivotal Padded Seatpost Alloy Pivotal 25.4 x 200mm Speeds 1 Front Hub Alloy Body Sealed Bearings 36h 3/8' x 17mm Female Bolt Front Tire GT LP-5 20 x 2.2' Rear Hub Alloy Body 5pcs Sealed Bearings Cr-Mo 14mm x 165mm Axle 9T Cassette 36h 17mm Nut Rear Tire GT LP-5 20 x 2.2'
The Conway Team Comp is an Intermediate level bike from GT and is the perfect bike to upgrade from an entry level bike. It's spec'd really well with fully sealed bearings throughout, Chromoly front triangle frame, chromoly fork & handlebars, double wall rims, GT LP-5 tyres, pivotal GT Padded seat and post and much more. ###section### Product Specs FRAME MATERIAL: Chromoly Front Triangle & Chainstays WHEEL SIZE: 20" TOP TUBE LENGTH: 21" CHAIN STAY LENGTH: 13.7" HEADTUBE ANGLE: 75° SEAT TUBE ANGLE: 71° FORKS: 100% Cro-Mo 1pc. Threaded Steerer & Tapered Legs, 31mm OffSet, 3/8”Axle Dropouts BARS: GT Freestyle 4pc. 100%Cr-Mo, 9.875”H x 29”W ,5° Up, 9° Back STEM: GT Top Load, 1-1/8”, Cold Forged Cap, 32mm Rise, 50mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Aluminum U-Brake w/ Soft Compound Pad FRONT HUB: Alloy Body, Sealed Bearings, 36h, 3/8” x 17mm Female Bolt FRONT RIM: Alloy Double Wall, 36h REAR HUB: Alloy Body, 5pcs Sealed Bearings, Cr-Mo 14mm x 165mm Axle, 9TCassette, 36h, 17mmNut REAR RIM: Alloy Double Wall, 36h TYRES: GT LP-5 20x (F)2.2” (R)2.35” SPROCKET: GT 25T Steel Chainwheel CRANKS: GT Power Series Seamless Tubular Cr-Mo 3pc., 170mm Arms BB: Sealed Mid PEDALS: GT Low Profile FS Platform Design SEAT: GT Pivotal Padded GEARING: 25/9 WEIGHT: TBC ###section### Product Highlights Longer top tube is great for taller riders who need a bit more room (6ft / 180cm plus) A great all rounder suitable for any type of riding Strong Lightweight Chromoly Front Triangle & Chainstays Sealed Bearings All Round Strong Lightweight 3 Piece Chromoly Cranks ###shogun-image-section###
The Conway Team is an Intermediate level bike from GT and is the perfect first bike if you are looking for a solid high spec bike at good value. The frame uses a Chromoly front triangle for added strength, Chromoly steertube tapered forks, Sealed bearings throughout as well as a GT Padded Signature pivotal seat and post, GT LP-5 tyres and Soft compound Grips. ###section### Product Specs FRAME MATERIAL: Chromoly Front Triangle & Chainstays WHEEL SIZE: 20" TOP TUBE LENGTH: 21" CHAIN STAY LENGTH: 13.2" HEADTUBE ANGLE: 75° SEAT TUBE ANGLE: 71° FORKS: 100% Cro-Mo 2pc. Threaded Steerer & Tapered Legs, 31mm OffSet, 3/8”Axle Dropouts BARS: GT Freestyle 4pc., Steel, 9.125”H x 29”W, 5° Up, 9° Back STEM: GT Top Load, 1-1/8”, Cold Forged Cap, 32mm Rise, 50mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Aluminum U-Brake w/ Soft Compound Pad FRONT HUB: Alloy Body, Sealed Bearings, 36h, 3/8” x 17mm Female Bolt FRONT RIM: Alloy Single Wall, 36h REAR HUB: Alloy Body, 5pcs Sealed Bearings, Cr-Mo 14mm x 165mm Axle, 9TCassette, 36h, 17mmNut REAR RIM: Alloy Double Wall, 36h TYRES: GT LP-5 20x (F)2.2” (R)2.35” SPROCKET: GT 25T Alloy Chainwheel CRANKS: GT Power Series Seamless Tubular Cr-Mo 3pc., 170mm Arms BB: Sealed Mid PEDALS: GT Low Profile FS Platform Design SEAT: GT Pivotal Padded GEARING: 25/9 WEIGHT: TBC ###section### Product Highlights Longer top tube is great for taller riders who need a bit more room (6ft / 180cm plus) A great all rounder suitable for any type of riding Strong Lightweight Chromoly Front Triangle & Chainstays Sealed Bearings All Round Strong Lightweight 3 Piece Chromoly Cranks ###shogun-image-section###
The Conway Team Signature as the name suggests, is Brian Kachinsky's signature bike. It's stacked full of high level aftermarket parts. Starting with the frame, Full 4130 chromoly with down tube gusset for added strenth, Removable brake mounts and pro level geometry just like Dan Conways own ride! ###section### Product Specs FRAME MATERIAL: 100% Chromoly WHEEL SIZE: 20" TOP TUBE LENGTH: 21" CHAIN STAY LENGTH: 13.4" HEADTUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° FORKS: 100% Cro-Mo 1pc. Threaded Steerer & Tapered Legs, 31mm OffSet, 3/8”Axle Dropouts BARS: GT Freestyle 4pc., Steel, 9.125”H x 29”W, 5° Up, 9° Back STEM: GT Top Load, 1-1/8”, Cold Forged Cap, 32mm Rise, 50mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Removable BRAKES: Aluminum U-Brake w/ Soft Compound Pad FRONT HUB: Alloy Body, Sealed Bearings, 36h, 3/8” x 17mm Female Bolt FRONT RIM: Alloy Double Wall, 36h REAR HUB: Alloy Body, 5pcs Sealed Bearings, Cr-Mo 14mm x 165mm Axle, 9T Freecoaster, 36h, 17mmNut REAR RIM: Alloy Double Wall, 36h TYRES: GT Pool 20x2.3” SPROCKET: GT 25T Alloy Chainwheel CRANKS: GT Power Series Seamless Tubular Cr-Mo 3pc., 170mm Arms BB: Sealed Mid PEDALS: GT Low Profile FS Platform Design SEAT: GT Pivotal Padded GEARING: 25/9 WEIGHT: TBC ###section### Product Highlights Longer top tube is great for taller riders who need a bit more room (6ft / 180cm plus) Designed to excel at Street riding thanks to responsive geometry but will feel at home in any riding environment Strong Lightweight Chromoly Frame Sealed Bearings All Round Strong Lightweight 3 Piece Chromoly Cranks ###shogun-image-section###
The Conway Team Signature as the name suggests, is Dan Conway's signature bike. It's stacked full of high level aftermarket parts. Starting with the frame, Ful 4130 chromoly with down tube gusset for added strenth, Removable brake mounts and pro level geometry just like Dan Conways own ride! ###section### Product Specs FRAME MATERIAL: 100% Chromoly WHEEL SIZE: 20" TOP TUBE LENGTH: 21.25" CHAIN STAY LENGTH: 13.4" HEADTUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° FORKS: 100% Cro-Mo 1pc. Threaded Steerer & Tapered Legs, 31mm OffSet, 3/8”Axle Dropouts BARS: GT Freestyle 4pc. 100%Cr-Mo, 9.875”H x 29”W ,5° Up, 9° Back STEM: GT Top Load, 1-1/8”, Cold Forged Cap, 32mm Rise, 50mm HEADSET: 1 1/8” Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Removable BRAKES: Odyssey Springfield U-Brake FRONT HUB: Alloy Body, Sealed Bearings, 36h, 3/8” x 17mm Female Bolt FRONT RIM: Alloy Double Wall, 36h REAR HUB: Alloy Body, 5pcs Sealed Bearings, Cr-Mo 14mm x 165mm Axle, 9TCassette, 36h, 17mmNut REAR RIM: Alloy Double Wall, 36h TYRES: GT LP-5 20x (F)2.2” (R)2.35” SPROCKET: GT 25T Alloy Chainwheel CRANKS: GT Power Series Seamless Tubular Cr-Mo 3pc., 170mm Arms BB: Sealed Mid PEDALS: GT Low Profile FS Platform Design SEAT: GT Pivotal Padded GEARING: 25/9 WEIGHT: TBC ###section### Product Highlights Longer top tube is great for taller riders who need a bit more room (6ft / 180cm plus) Designed to excel at Street riding thanks to responsive geometry but will feel at home in any riding environment Strong Lightweight Chromoly Frame Sealed Bearings All Round Strong Lightweight 3 Piece Chromoly Cranks ###shogun-image-section###
Weighing just 215g and with an innovative wind-tunnel-tested design that optimises both aerodynamics and ventilation, the Protone (WG11) Team Ineos Grenadiers Road Cycling Helmet delivers impressive performance and comfort for racing and training. Multi In-Moulding Technology KASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell. The three-way evaporation Aerator position at the top of the helmet boosts safety. The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact. WG11 Safety Test The Protone exceeds stringent WG11 testing protocols. This series of scientific-based protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike. 3D Dry tri-dimensional padding The special internal padding is based on an innovative multi-layer open-cell construction process, giving maximum comfort and performance. Ventilation holes reduce the head-to-pad contact surface by 70% compared to standard designs, with 5mm thick padding material that wicks moisture rapidly away from the helmet’s outer shell. CoolMax® material padding The front of the helmet features a highly effective sweat-absorber that is easily removable and washable. The fabric has been treated using the Sanitized® antimicrobial process, preventing bacteria build-up and itchiness. Self-adjusting lateral divider This provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes. Kask Octo-Fit The rubberised Micro Dial provides secure finger grip for easy adjustment. Floating cradle contact points combine internal gel pads for optimum comfort and these supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible Chin pad with eco-leather chinstrap The anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.
Kask Protone Icon (WG11) Team Ineos Grenadiers Road Cycling HelmetWith its perfect mix of sleek aerodynamics, optimised airflow, superb safety engineering and Italian style, the Kask Protone Icon (WG11) Team Ineos Grenadiers Road Cycling Helmet is ideal for the fun of both training and racing. The Protone Icon (WG11) Team Ineos Grenadiers Road Cycling Helmet has had a subtle update to the design. Tweaks to the venting give a boost to airflow, an improved fit system is now both more comfortable and secure, and subtle redesigns to the aesthetics bring it right up to date. What hasn't changed is the superb head protection on offer and that race-winning combination of comfort and aerodynamics. Multi In-Moulding TechnologyFrom the safety point of view, you'll continue to benefit from Kask's Multi-In-Moulding Technology. This sees a durable but lightweight polycarbonate shell fused to the shock-absorbing EPS foam inner. In the event of a crash, this works to dissipate harmful forces that could otherwise cause serious injury. The protective foam is also reinforced internally, providing extra strength and ensuring structural integrity should you be unfortunate enough to fall.WG11 Safety Testing ProtocolsThe Protone also exceeds stringent WG11 testing protocols. This series of scientific-based protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike.OctoFit+ retention systemWith the OctoFit+ retention system, you can dial in the fit of your Protone quickly and ensure perfect comfort every time you ride. A rubberised dial allows micro-adjustment of the fit while the vertical stabilisers of the previous system have been redesigned to achieve even greater comfort and stability. The secure fit also ensures that in the event of a crash it keeps the helmet in place to afford the very best protection.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes, guaranteeing freedom of movement and excellent ventilation.Coolmax PaddingWhen the pressure is being applied at the front of the bunch, training is tough or the temperatures are rising fast, it's the Coolmax® padding that will deal with the inevitable sweat build-up. Quick to wick away sweat and quick to dry, you'll be kept cool and comfortable no matter what.Features:Multi In-Moulding Technology to improve the shell's shock absorptionIntegrated structural reinforcementSuperior ventilation via redesigned ventsHeat-moulded Coolmax® liningOctoFit+ Fitting System - guarantees quick adjustment and a perfect fit for all head shapes and with long hairChin pad with eco-leather chinstrapExceeds WG11 International Safety Test ProtocolsCE-EN-1078Weight: 230g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Protone (WG11) Team Ineos Grenadiers Road Cycling HelmetBlending smooth aerodynamics and ventilation alongside the safety of WG11 test protocols, the Kask Protone (WG11) Team Ineos Grenadiers Road Cycling Helmet is the ultimate all-rounder for cycling performance and protection. Weighing just 215g and with an innovative wind-tunnel tested design that optimises both aerodynamics and ventilation, the Protone (WG11) Team Ineos Grenadiers Road Cycling Helmet delivers impressive performance and comfort for racing and training. Multi In-Moulding TechnologyKASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell.The three-way evaporation Aerator position at the top of the helmet boosts safety. The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact. WG11 Safety TestThe Protone exceeds stringent WG11 testing protocols. This series of scientific-based protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike.3D Dry tri-dimensional paddingThe special internal padding is based on an innovative multi-layer open cell construction process, giving maximum comfort and performance.Ventilation holes reduces the head-to-pad contact surface by 70% compared to standard designs, with 5mm thick padding material that wicks moisture rapidly away to the helmet’s outer shell.CoolMax® material paddingThe front of the helmet features a highly effective sweat-absorber that is easily removable and washable. The fabric has been treated using the Sanitized® antimicrobial process, preventing bacteria build-up and itchiness.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes.Kask Octo-FitThe rubberised Micro Dial provides secure finger grip for easy adjustment. Floating cradle contact points combine internal gel pads for optimum comfort and these supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head.The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possibleChin pad with eco-leather chinstrapThe anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.Features:Multi In-Moulding Technology to improve the shell's shock absorptionOcto Fit adjustment system guarantees a perfect fit to any kind of head shape3D Dry tri-dimensional paddingCoolMax® material paddingSelf-adjusting lateral dividerThree-way evaporation Aerator positionChin pad with eco-leather chinstrapBag includedPasses WG11 International Safety Test and CE-EN-1078Weight: 215g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Protone (WG11) Team Ineos Grenadiers Road Cycling HelmetBlending smooth aerodynamics and ventilation alongside the safety of WG11 test protocols, the Kask Protone (WG11) Team Ineos Grenadiers Road Cycling Helmet is the ultimate all-rounder for cycling performance and protection. Weighing just 215g and with an innovative wind-tunnel tested design that optimises both aerodynamics and ventilation, the Protone (WG11) Team Ineos Grenadiers Road Cycling Helmet delivers impressive performance and comfort for racing and training. Multi In-Moulding TechnologyKASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell.The three-way evaporation Aerator position at the top of the helmet boosts safety. The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact. WG11 Safety TestThe Protone exceeds stringent WG11 testing protocols. This series of scientific-based protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike.3D Dry tri-dimensional paddingThe special internal padding is based on an innovative multi-layer open cell construction process, giving maximum comfort and performance.Ventilation holes reduces the head-to-pad contact surface by 70% compared to standard designs, with 5mm thick padding material that wicks moisture rapidly away to the helmet’s outer shell.CoolMax® material paddingThe front of the helmet features a highly effective sweat-absorber that is easily removable and washable. The fabric has been treated using the Sanitized® antimicrobial process, preventing bacteria build-up and itchiness.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes.Kask Octo-FitThe rubberised Micro Dial provides secure finger grip for easy adjustment. Floating cradle contact points combine internal gel pads for optimum comfort and these supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head.The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possibleChin pad with eco-leather chinstrapThe anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.Features:Multi In-Moulding Technology to improve the shell's shock absorptionOcto Fit adjustment system guarantees a perfect fit to any kind of head shape3D Dry tri-dimensional paddingCoolMax® material paddingSelf-adjusting lateral dividerThree-way evaporation Aerator positionChin pad with eco-leather chinstrapBag includedPasses WG11 International Safety Test and CE-EN-1078Weight: 215g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.