The Alternative Jersey offers a slim but comfortable fit using the combination of two highly technical, recycled Italian mesh performance fabrics. Having been made from 100% recycled materials, this is a jersey you will feel comfortable in and good about. Lightweight and breathable with a slim but comfortable fit, it is the perfect Jersey for warm summer rides. The materials have been treated with HeiQ®, innovative Swiss technology eliminating bad smell and odor in compliance with Bluesign®, and OEKO-TEX®, approved. Specification: Bottom hem is equipped with elastic silicone tape made out of 100% recycled Polyamide and Elastane fibers to keep the jersey in place Combination of two highly technical, Italian mesh performance fabrics, further enhanced by a low environmental impact production Materials knitted with yarns obtained by recycling waste materials in compliance with the GRS International Certification Designed by Martin Velits using his experience from the pro peloton Made in EU Materials: Fabric 1: 93% Multi-Filament Recycled Polyester, 7% Recycled Elastane Fabric 2: 87% Multi-Filament Recycled Polyester, 13% Elastane
iXS Tear-Off Standard Film Sheets (20)The iXS Tear-Off Standard Film Sheets (20 tear-offs per pack) fit your iXS goggles to keep vision clear and unobscured when the dirt is flying. Features:Tear-Off standard (20pcs film sheets, strap pin clip)ITEM-NO. A - 469-510-9093-000 (STANDARD)Buy iXS from Chain Reaction Cycles, the World's Largest Online Bike Store.
This standard pack of 20 tear-off sheets includes the strap pin clip.
Jagwire Mountain Pro Brake KitJagwire supplies their Mountain Pro Brake Kits separately to their Pro Shift kits, enabling you to create a colour combination that best suits your bike. This Pro kit features Kevlar reinforced outer cables that are compressionless for kink-free, reliable performance and pre-stretched and polished stainless steel inner cables for an ultra-smooth and friction-free action. The inner cables also run through slick-lube liners, ensuring this kit provides you with fine brake modulation and consistent braking power.Features: Pro level polished cables combined with slick-lube inner liners Kevlar reinforced housing Kit includes long housing and cables to ensure compatibility with large frames All parts needed for a complete brake cable and housing install Hose Construction: KEB with slick-lube liner Compatibility: SRAM/Shimano mountain Front Cable Length: 1,500mm Rear Cable Length: 2,800mm Housing Length: 3,000mm Cables: STS-PS Outside Diameter: 5.0mm Contents: 1x 3,000mm KEB-SL Kevlar-reinforced brake housing 1x 1,500mm Pro slick polished stainless front brake inner cable 1x 2,800mm Pro slick polished stainless rear brake inner cable 4x lined alloy end caps 2x POP alloy end caps 2x cable tips 2x 5G tube tops 3x cable donuts 2x rotating hooksTechnologies:KEB-SL Outer Cable: This high-quality outer cable consists of linear strands that are Kevlar-reinforced, and that wrap around a slick-lube liner. A major performance upgrade to coiled steel, this compressionless housing starts with a similar construction to Jagwire's LEX shift housing that reduces weight by 30%. The woven Kevlar layer gives the housing the strength and flexibility that is necessary for braking applications.STS-PS Cables: These pre-stretched, slick stainless steel spiral-bound cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes by riders looking for ultimate performance.Buy Jagwire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Jagwire Pro 1x Shift Gear Cable KitThis high-quality Gear Cable Kit from Jagwire offers faster and smoother shifting for both Road and Mountain Bike (MTB) cycling. Ready for action, its outer cable’s feature an innovative braided strand construction that are wrapped around a slick lube liner to ensure a friction-free action that ensures you get the best performance from your components.Features:Material: SteelUse: Mountain Bike, RoadSpeed: Single speedIncluded:1x 2200mm LEX-SL Shift Housing1x 2800mm Pro Polished Slick Shift Inner Cable2x Sealed Alloy End Caps4x Lined Alloy End Caps1x Hooded Alloy End Cap1x Cable Tip1x 5G Tube Top3x Cable Donuts1x Rotating HookTechnologies:XEX-SL Outer Cable: This gear outer features lightweight, braided steel strands around a slick-lube liner and creating a compression less ring. This provides the accurate cable movement needed for modern drivetrains, with a weight savings of 50% compared to traditional linear strand shift housing.STS-PS Cables: These pre-stretched, slick stainless-steel spiral-bound cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes by riders looking for ultimate performance.Buy Jagwire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Jagwire Pro Hydraulic Disc Brake HoseWith so many hydraulic disc brake platforms on the markets, finding parts and fitting hoses can be complex and frustrating. Jagwire has recognised this and made its Pro Hydraulic Hose compatible with all hydraulic brake platforms when paired with the appropriate Quick-Fit adaptors that are available separately for most popular brake manufacturers.Features: Kevlar weave surrounding the liner prevents bulges due to heat build up and extreme pressure Each hose includes 2 caliper-side universal couplers that connect to the Quick-Fit adaptors (sold separately) Hose Construction: HFK Compatibility: Universal with Quick-Fit adaptors (sold separately) Liner Material: Tefzel Hose Length: 3,000mm Outside Diameter: 5.0mmTechnologies: HFK: A low-friction Tefzel liner ensures smooth fluid flow, and a Kevlar weave provides strength to prevent hose expansion while maintaining flexibility.Buy Jagwire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Jagwire Pro Shift Universal Gear Cable KitThe Jagwire Pro Shift Kit offers you quicker and easier shifting, a distinctive style, and kink-free, reliable performance. This is thanks to the outer cable’s innovative construction from braided strands that are wrapped around a slick lube liner to ensure a friction-free action. The Pro Shift Kit suits road and mountain bikes and also includes pre-stretched and polished stainless steel inner cables, which will ensure you get the absolute best from your top end components.Features: Pro level polished cables combined with slick-lube inner liners Kit includes long housing and cables to ensure compatibility with large frames or a fully housed system Includes all parts needed for a complete road or mountain bike gear cable and housing install Hose Construction: XEX with slick-lube liner Compatibility: SRAM/Shimano road and mountain Front Cable Length: 2,300mm Rear Cable Length: 2,300mm Housing Length: 3,200mm Cables: STS-PS Outside Diameter: 4.0mm Contents: 1x 3,200mm XEX-SL shift housing 1x 2300mm Pro slick polished stainless front shift inner cable 3x sealed alloy end caps 6x lined alloy end caps 2x hooded alloy end caps 2x cable tips 2x 5G tube tops 6x cable donuts 2x rotating hooksTechnologies:XEX-SL Outer Cable: This gear outer features lightweight, braided steel strands that around a slick-lube liner and creating a compressionless ring. This provides the accurate cable movement needed for modern drivetrains, with a weight savings of 50% compared to traditional linear strand shift housing.STS-PS Cables: These pre-stretched, slick stainless steel spiral-bound cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes by riders looking for ultimate performance.Buy Jagwire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Jagwire Road Elite Sealed Brake Cable Kit
Jagwire Road Pro Brake Cable KitA perfect upgrade if you are in the market to improve you braking, the Jagwire Pro Road Brake kit includes pre-stretched stainless-steel road inner cables paired up with reinforced Kevlar outer cable.Features:Pro level polished cables combined with slick-lube inner linersKevlar® reinforced housingKit includes long housing and cables to ensure compatibility with large frames or mechanical disc brakesAll parts needed for a complete brake cable and housing installHose Construction: KEB with slick-lube linerCompatibility: SRAM®/Shimano® roadFront Cable Length: 1,500mmRear Cable Length: 2,800mmHousing Length: 3,000mmCables: STS-PSOutside Diameter: 5.0mmTechnologies:KEB-SL Outer Cable: This high-quality outer cable consists of linear strands that are Kevlar®-reinforced, and that wrap around a slick-lube liner. A major performance upgrade to coiled steel, this compressionless housing starts with a similar construction to Jagwire's LEX shift housing that reduces weight by 30%. The woven Kevlar® layer gives the housing the strength and flexibility that is necessary for braking applications.STS-PS Cables: These pre-stretched, slick stainless-steel spiral-bound cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes by riders looking for ultimate performance.Buy Jaguire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Weighing just 215g and with an innovative wind-tunnel-tested design that optimises both aerodynamics and ventilation, the Protone (WG11) Team Ineos Grenadiers Road Cycling Helmet delivers impressive performance and comfort for racing and training. Multi In-Moulding Technology KASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell. The three-way evaporation Aerator position at the top of the helmet boosts safety. The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact. WG11 Safety Test The Protone exceeds stringent WG11 testing protocols. This series of scientific-based protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike. 3D Dry tri-dimensional padding The special internal padding is based on an innovative multi-layer open-cell construction process, giving maximum comfort and performance. Ventilation holes reduce the head-to-pad contact surface by 70% compared to standard designs, with 5mm thick padding material that wicks moisture rapidly away from the helmet’s outer shell. CoolMax® material padding The front of the helmet features a highly effective sweat-absorber that is easily removable and washable. The fabric has been treated using the Sanitized® antimicrobial process, preventing bacteria build-up and itchiness. Self-adjusting lateral divider This provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes. Kask Octo-Fit The rubberised Micro Dial provides secure finger grip for easy adjustment. Floating cradle contact points combine internal gel pads for optimum comfort and these supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible Chin pad with eco-leather chinstrap The anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.
Kask Protone Icon (WG11) Team Ineos Grenadiers Road Cycling HelmetWith its perfect mix of sleek aerodynamics, optimised airflow, superb safety engineering and Italian style, the Kask Protone Icon (WG11) Team Ineos Grenadiers Road Cycling Helmet is ideal for the fun of both training and racing. The Protone Icon (WG11) Team Ineos Grenadiers Road Cycling Helmet has had a subtle update to the design. Tweaks to the venting give a boost to airflow, an improved fit system is now both more comfortable and secure, and subtle redesigns to the aesthetics bring it right up to date. What hasn't changed is the superb head protection on offer and that race-winning combination of comfort and aerodynamics. Multi In-Moulding TechnologyFrom the safety point of view, you'll continue to benefit from Kask's Multi-In-Moulding Technology. This sees a durable but lightweight polycarbonate shell fused to the shock-absorbing EPS foam inner. In the event of a crash, this works to dissipate harmful forces that could otherwise cause serious injury. The protective foam is also reinforced internally, providing extra strength and ensuring structural integrity should you be unfortunate enough to fall.WG11 Safety Testing ProtocolsThe Protone also exceeds stringent WG11 testing protocols. This series of scientific-based protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike.OctoFit+ retention systemWith the OctoFit+ retention system, you can dial in the fit of your Protone quickly and ensure perfect comfort every time you ride. A rubberised dial allows micro-adjustment of the fit while the vertical stabilisers of the previous system have been redesigned to achieve even greater comfort and stability. The secure fit also ensures that in the event of a crash it keeps the helmet in place to afford the very best protection.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes, guaranteeing freedom of movement and excellent ventilation.Coolmax PaddingWhen the pressure is being applied at the front of the bunch, training is tough or the temperatures are rising fast, it's the Coolmax® padding that will deal with the inevitable sweat build-up. Quick to wick away sweat and quick to dry, you'll be kept cool and comfortable no matter what.Features:Multi In-Moulding Technology to improve the shell's shock absorptionIntegrated structural reinforcementSuperior ventilation via redesigned ventsHeat-moulded Coolmax® liningOctoFit+ Fitting System - guarantees quick adjustment and a perfect fit for all head shapes and with long hairChin pad with eco-leather chinstrapExceeds WG11 International Safety Test ProtocolsCE-EN-1078Weight: 230g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kask Protone (WG11) Team Ineos Grenadiers Road Cycling HelmetBlending smooth aerodynamics and ventilation alongside the safety of WG11 test protocols, the Kask Protone (WG11) Team Ineos Grenadiers Road Cycling Helmet is the ultimate all-rounder for cycling performance and protection. Weighing just 215g and with an innovative wind-tunnel tested design that optimises both aerodynamics and ventilation, the Protone (WG11) Team Ineos Grenadiers Road Cycling Helmet delivers impressive performance and comfort for racing and training. Multi In-Moulding TechnologyKASK has continued to use its Multi In-Moulding Technology to create a polycarbonate cover for the top, base ring and the back of the helmet’s shell. This is joined to the inner polystyrene cap via KASK’s In-Moulding Technology to improve the shell’s shock absorption. Its strengthened frame further reduces the risk of a shock breaking the shell.The three-way evaporation Aerator position at the top of the helmet boosts safety. The top area is reinforced with an internal plastic sub-structure that increases crash protection and helps maintain the helmet’s integrity after impact. WG11 Safety TestThe Protone exceeds stringent WG11 testing protocols. This series of scientific-based protocols focus on protection from rotational impact forces, measuring rotational kinematics from both oblique and normal impacts. With these safety protocols adhered to, you can be sure this helmet has you covered should you be unfortunate enough to fall from your bike.3D Dry tri-dimensional paddingThe special internal padding is based on an innovative multi-layer open cell construction process, giving maximum comfort and performance.Ventilation holes reduces the head-to-pad contact surface by 70% compared to standard designs, with 5mm thick padding material that wicks moisture rapidly away to the helmet’s outer shell.CoolMax® material paddingThe front of the helmet features a highly effective sweat-absorber that is easily removable and washable. The fabric has been treated using the Sanitized® antimicrobial process, preventing bacteria build-up and itchiness.Self-adjusting lateral dividerThis provides great rider comfort with minimal adjustment required. After putting on the helmet and fastening the chin strap, the divider moves to fit comfortably around the earlobe. The ergonomic design means a great fit for all head shapes and sizes.Kask Octo-FitThe rubberised Micro Dial provides secure finger grip for easy adjustment. Floating cradle contact points combine internal gel pads for optimum comfort and these supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head.The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possibleChin pad with eco-leather chinstrapThe anti-allergy, washable chinstrap is extremely comfortable and helps prevent skin irritation. It incorporates soft lateral spacers, shaped to enable excellent ventilation and avoid that unpleasant ‘sweaty strap’ feeling.Features:Multi In-Moulding Technology to improve the shell's shock absorptionOcto Fit adjustment system guarantees a perfect fit to any kind of head shape3D Dry tri-dimensional paddingCoolMax® material paddingSelf-adjusting lateral dividerThree-way evaporation Aerator positionChin pad with eco-leather chinstrapBag includedPasses WG11 International Safety Test and CE-EN-1078Weight: 215g (M)Buy Kask Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.