Not that long ago mountain bikes were simple - suspension opened up more terrain and, more importantly, it meant more fun. The original Z2 was there for the mountain bike suspension revolution ÔÇôyou simply mounted it on your bike and hit the trails. Less time prepping and fixing meant you could just focus on the ride. Twenty years later, that same DNA lives on in the new Marzocchi Z2; it's ready to shred with smooth and plush suspension. The new from-the-ground-up Rail damper combines low maintenance with intuitive ease of use and impressive on-trail performance. The top-of-fork simple sweep adjuster from firm to open can lock out the fork or fully open the system with plenty of positions in between. The Z2 - it just makes everything easy. SPECIFICATION Colours: Matte black. ,Travel: 130mm (29" only), 120mm, 140mm (27.5" only). ,Wheel: 27.5", 29". ,Rake: 44mm, 51mm (29"only). ,Axle: 15QRx110. ,Damping: RAIL. ,Spring: FLOAT. ,Stanchions: Ø34mm Black Anodizing. ,Steerer: Tapered Aluminum..
There was a time - not that long ago - when mountain bikes were simple. The leap from rigid forks to suspended freedom opened up more terrain. More importantly, it meant more fun. The Marzocchi Z2 was a badge of honor. It still is. Red forks that match with anything. A heritage that speaks volumes. In the past twenty years, bikes may have changed dramatically but, damn it, does progress ever look good.Long live fun. Long live the king. Welcome back, Z2. Now, send it.Key Features:New 32 chassis with uniquely styled "M" lower legs.,New Rail damper design with full compression sweep adjust.,New 15QRx110mm axle design.,Butted 6000 series aluminium upper tubes.,FLOAT EVOL air spring system.,Metal compression assembly..Specification:Enhanced lower leg stiffness with "M" arch design for maximum tyre clearance.,Colours: Gloss Red or Matte Black.,Axle: 15QRx110mm.,Tyre comptibility: 27.5 x 2.8" or 29 x 2.6".,Travel: 100, 120, 130, 140, 150mm.,Rake: 37, 44, 51mm..
Riders have been asking for it, Marzocchi heard the call and has proudly delivered.The new Z1 Coil builds on the legacy of the single crown fork that started the revolution way back in the 90s the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers.Key Features:Chassis: 36mm.,Travel:160mm, 170mm (29 only).,170mm, 180mm (27.5 only),.,Wheel: 27.5 or 29.,Axle: 15QRx110.,Damping: GRIP (compression + rebound).,Spring: Tempered Silicone-Chromium Steel.,Steerer: 1.5 Tapered Aluminum.,Stanchions: Ø36mm Black Anodized.,Rake: 44mm.,Colour: Matte Black or Gloss Red..
A icon returns. In 1997, the Marzocchi Bomber Z1 burst onto the scene and bucked all contemporary trends. The flavours of that decade included rubber springs and feathery weights. The Z1 brought oil, coils and massive stanchions - it unapologetically prioritized grip and ride quality over just about everything else. The return of Z1 brings back these same priorities in a robust 6000-series alloy 36mm chassis with a super plush air spring and proven GRIP damper.Key Features:36mm single crown chassis with new Marzocchi Bomber Z1 lower legs.,EVOL air spring with adjustable volume.,FIT GRIP Sweep damper with adjustable compression and rebound damping..Specification:Stanchion: 36mm.,Travel: 140-170mm (29") / 150-180mm (27.5").,Air Spring: EVOL.,Damper Options: FIT GRIP.,Axle Options: 15QR x 110mm.,Steerer: 1.5 Taper.,Colour Options: Matte Black..
LEVEL 52 42-52mm Tapered HeadsetPrecision engineered to fit forks with a tapered 1 1/8 to 1 1/2 steerer tube, the elegant and dependable LEVEL 52 headset delivers the everyday performance and smooth handling that will enhance any ride. Compatible with the following framesets:CGR AL & CGR 725 SteelHybrid AL & Hybrid AL eEndurance AL & Endurance AL DiscEndurance 725 & Endurance 725 DiscR872 & R872 DiscCX ALCarbon fork expander and top cap not included. You can purchase a top cap here. Product detailsSize: IS42 Top / IS52 BottomUpper Bearing: 30.2 x 41.8 x 7mm - 45° x 45° Lower Bearing: 40 x 51.8 x 8mm - 45° x 45°
Suitable for tapered Zero Stack headtubes and 1 1/8 - 1.5" fork steerers, the Hope internal headset features 2014 T6 machined aluminium cups, taper ring and crown race (which is split for easy installation and removal) and a set of custom INA Swiss manufactured precision cartridge bearing races for durability and performance, all headsets also come complete with Hope's Hed Doctor preload top cap.Protection from the elements is achieved through an adjustable taper ring cover and integrated rubber seal, whilst the bearings also incorporate their own sealing, and being made from stainless steel resist corrosion - a real advantage over a conventional steel bearing.
Hope Bottom Bracket Truvativ GXP Converter These converter rings are all you need to make your Hope bottom bracket compatible with Truvativ GXP cranks and all SRAM chainsets that have a 24-22mm tapered spindle. Suitable for mountain bike bottom brackets and road and city bikes too. Features: 2 x converter rings Specifically designed for Hope bottom brackets Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tapered 1.5" Headset Reducer CrownAn adaptor to convert an 1.1/8 steerer to a 1.5", you need to purchase this reducer together with a Hope Tapered Headset to fit a standard fork into a tapered bike frame. Features:Designed to enable you to run 1 1/8" forks in a 1.5" headset cupDimensions: Internal: 30mm (to fit over 1 1/8" steerer tubes); External: 39.85mm (to fit inside 1.5" crown races)Weight: 16g (approx)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tapered Headset Cartridge BearingThe smooth-operating Tapered Headset Bearing from bike component specialists Hope is fully sealed to protect it from the elements and for riding in the toughest conditions. 52mm in diameter and 40mm internal, it’s designed for bike frames that have fully integrated tapered headtubes, such as mountain bikes (MTBs) that use forks with 1.1/8” to 1.5” tapered steerer tubes.Features:For Headset Type: Fully integrated taperedSteerer Tube Compatibility: 1.5"Dimensions: 52x40x7mm (Outer diameter x inner diameter x thicknessAngles: 45x45°Headset Compatibility: All of Hope's tapered headsetsGenuine replacement part from HopeFully sealed cartridge bearingSold individuallyCrown Race not includedManufacturer's Part Number: HS135Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tapered Integral Headset (ZS44 - ZS56)Hope’s integral headset delivers smooth and reliable rotation on every ride. With multiple seals to protect it from water and dirt ingress and fully sealed cartridge bearings, its smooth performance will last too. To further increase its durability, the cups, crown race and taper ring are all made from 2014 T6 Aluminium. It compatible with MTB frames with tapered headtubes and suspension forks with tapered steerer tubes.Reasons to Buy: Delivers a smooth and reliable rotation. Mutliple seals for added protection. Increased durability.Features: Cup Material: Machined Aluminium Steerer Size: 1 1/8" - 1.5" tapered Headtube Type/Internal Size - Top: Integral (43.95mm) Headtube Type/Internal Size - Bottom: 1.5" Integral (55.9mm) Bearings: Custom made Stainless Steel, sealed cartridge bearings Extra Features: Hed Doctor included (top cap system) Can be used with straight 1 1/8" forks with additional conversion crown (sold separately) Split crown race for easy installation and removal Multiple seals to keep out the elements Manufacturer's Reference Code: HSTN Weight: 128gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Hope Tapered Headset includes custom-made stainless steel bearings (which are replaceable). The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium. It is also possible to fit a standard 1.1/8" steerer using an additional conversion crown (sold separately). All Hope headsets come complete with the Head Doctor. This Hope Tapered Semi-Integrated headset also has advanced sealing that's achieved through an adjustable taper ring cover and integrated rubber seal. The bearings also incorporate their own sealing and are made from stainless steel to resist corrosion - a real advantage over a conventional steel bearing.