Fox Suspension 38 Float Performance Elite Grip 2 ForkBuilt for enduro racing, this suspension fork is part of the Performance Elite series and includes the same adjustments, features, dampers, weight, and 7000 series aluminium upper tubes as Factory Series. The difference is this model's upper tubes feature a hard-wearing anodised finish for fantastic protection against corrosion during wet riding conditions. Fox Suspension has also kitted out this version with Boost axle spacing, making it ideal for modern enduro racing as it delivers additional stiffness as you dominate your way from the top of the mountain to the bottom. To top it off, it comes complete with a lightweight Float EVOL air spring and a GRIP2 damper with dual Variable Valve Control (VVC) for a wide range of tuneability. Packing the same revolutionary feature set as the 36 model, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time.GRIP2 Damper with Dual Variable Valve Control (VVC)Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tubes Finish: Anodised Use: Enduro Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP2 with dual Variable Valve Control (VVC) Travel: 170mm Rake: 44mm Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 2180gTechnologies: Performance Elite Series: Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions instead of Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever-operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways we've further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not.Manufacturer's Part Numbers: 910-21-030 Black 27.5" QR110 170mm 44mm 910-21-023 Black 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 38 Float Performance Grip ForkPart of Fox Suspension's Performance Series, this enduro fork features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT GRIP DamperInspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, the Fox Suspension 38 Float Performance Grip Fork sets a new benchmark for confidence, performance, and durability. Features: Upper Tubes Finish: Anodised Use: Enduro Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP (3-position on-the-fly adjustability) Adjustments: Compression damping positions Open, Medium, Firm; Additional micro-adjust between settings Detents; Low-speed rebound Travel: 170mm Rake: 44mm Compatible Rotor Size: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 2180gTechnologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways we've further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not. 58mm crown diameter to match modern frame shape profiles. Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model.Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float Factory Grip 2 ForkThis mountain bike (MTB) suspension fork is part of the renowned Factory Series and includes a genuine Kashima finish on its upper tubes for slippery smooth, ultra-durable performance. Fox Suspension has also kitted out this version with a lightweight Float EVOL air spring and a GRIP2 damper to deliver a wide range of adjustment features, so you can fine-tune your suspension to match your riding style. Whether you're shredding your favourite local trails with your riding buddies or exploring new mountain routes on your own adventures, this do-it-all trail fork is in a class of its own.Hard Charging Trail Fork with GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34's now has an enlarged negative air spring to assist with mid-stroke support.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle Size: 15QRx110mm Air Spring: Float EVOL Damper: GRIP2 Adjustments: High-speed compression (with VVC); Low-speed compression; High-speed rebound (with VVC); Low-speed rebound Steerer Diameter: 1.5" tapered Brake Rotor Compatibility: 180-230mm Starting Weight: 1698gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Updated Crown: Updated 58mm diameter crown.Manufacturer's Part Numbers: 910-21-009 Black 29" QR110 130mm 51mm 910-21-008 Black 29" QR110 130mm 44mm 910-21-004 Black 29" QR110 140mm 51mm 910-21-003 Orange 29" QR110 140mm 44mm 910-21-001 Black 29" QR110 140mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float Factory Grip 2 ForkThis mountain bike (MTB) suspension fork is part of the renowned Factory Series and includes a genuine Kashima finish on its upper tubes for slippery smooth, ultra-durable performance. Fox Suspension has also kitted out this version with a lightweight Float EVOL air spring and a GRIP2 damper to deliver a wide range of adjustment features, so you can fine-tune your suspension to match your riding style. Whether you're shredding your favourite local trails with your riding buddies or exploring new mountain routes on your own adventures, this do-it-all trail fork is in a class of its own.Hard Charging Trail Fork with GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34's now has an enlarged negative air spring to assist with mid-stroke support.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle Size: 15QRx110mm Air Spring: Float EVOL Damper: GRIP2 Adjustments: High-speed compression (with VVC); Low-speed compression; High-speed rebound (with VVC); Low-speed rebound Steerer Diameter: 1.5" tapered Brake Rotor Compatibility: 180-230mm Starting Weight: 1698gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Updated Crown: Updated 58mm diameter crown.Manufacturer's Part Numbers: 910-21-009 Black 29" QR110 130mm 51mm 910-21-008 Black 29" QR110 130mm 44mm 910-21-004 Black 29" QR110 140mm 51mm 910-21-003 Orange 29" QR110 140mm 44mm 910-21-001 Black 29" QR110 140mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory E-Optimized Grip 2 ForkPart of Fox Suspension's prestigious Factory Series, this electric mountain bike (E-MTB) suspension fork comes trail-ready with technologies that are designed to exceed the demands of Factory-level riders. With an eye-catching genuine Kashima coating on its upper tubes, it provides slippery smooth operation while remaining ultra-durable as you tackle challenging terrain conditions. Benefitting from a lightweight Float EVOL air spring and a highly adjustable GRIP2 damper, the 36 offers an excellent combination of performance and tunability, everywhere from backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this E-MTB specific model is engineered for powerful front-end suspension performance. E-MTB Fork with GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by the Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tube Finish: Genuine Kashima Coat Use: Electric Mountain Bike (E-MTB) Axle: 15QRx110mm Boost Air Spring: Float EVOL Damper: GRIP2 with dual Variable Valve Control (VVC) on High Speed Compression (HSC) and High Speed Rebound (HSR) circuits Steerer Diameter: 1.5" tapered Rotor Compatibility: 180mm direct Post Mount, Up to 230mm compatible Increased crown diameter to match modern frame shape profilesTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever-operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Manufacturer's Part Numbers: 910-20-209 Black 27.5" QR110 140mm 44mm 910-20-208 Black 27.5" QR110 160mm 44mm 910-20-204 Black 29" QR110 160mm 51mm 910-20-203 Black 29" QR110 160mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Perf E-Optimized Grip ForkThis electric mountain bike (E-MTB) suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.E-MTB Fork with FIT GRIP DamperInspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tubes Finish: Anodised Use: Electric Mountain Bike (E-MTB) Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP (Three position on-the-fly adjustability) Travel: 160mm Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatibleTechnologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately).Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float AWL ForkEngineered for modern electric mountain bike (E-MTB) riding, this suspension fork features anodised upper tubes for an excellent balance of strength and durability as well as extra protection against corrosion during wetter rides. Its combination of a lightweight Float EVOL air spring and a RAIL damper smoothen out your ride, so you can stay in full control as you conquer your way from trail to trail. Benefitting from Boost axle spacing and 160mm to 230mm disc brake rotor compatibility, this model is designed prepared for fast and fun adventures, wherever your next ride takes you.AWL: Adventure Without LimitsDesigned to bring highly evolved, broadly tuneable, super capable, ultra-reliable suspension to the cycling SUV market. Whether you are racing the clock to fit in another lap, or riding further than you have ever before, AWL suspension is here to make every ride limitless.Race PedigreeLeveraging FOX's extensive experience with building the world's highest-performance off-road suspension systems, the AWL fork is based around the acclaimed FOX 34 chassis. Featuring lightweight but stiff 34mm stanchions and a precision cast magnesium lower, the AWL tracks precisely without any unwanted flex and ensures optimal long-term performance, regardless of the weather and dirt you plough through. Performance and adjustability are paramount thanks to our infinitely tuneable EVOL air spring and proven Rail damper. Externally adjustable rebound and compression damping are tool-free and easily accessible, while the Rail's sealed damper system delivers exceptional performance, bomber reliability, and hassle-free maintenance.Everyday Adventure ReadyAWL's stout chassis is available in both 27.5” and 29” wheel sizes and is rigorously tested to withstand a 169kg total weight rating. Fender, rack and light mounts are integrated into the fork for optimal compatibility, durability and versatility. Adverse conditions, rocks and roots will no longer harm your zip tied fenders. The AWL also comes with a special mount for a soon to be available, next level safety feature. Designed to handle whatever you load it up with and track smoothly and precisely across whatever terrain you point it at, the AWL can unlock your bike's electric potential, open up new landscapes, and bring adventure to your everyday ride.Features: Upper Tubes Finish: Anodised Use: Electric Mountain Bike (E-MTB) Axle Size: 15QRx110mm, Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: RAIL Brake Rotor Compatibility: 160mm direct Post Mount, Up to 230mm compatible Max Tyre Size: 2.8" (2.6" with a fender)Technologies: E-SUV Optimised: The explosion of electric assist technology has radically altered the cycling landscape. Not only are dedicated mountain bikers exploring new terrain and carrying more momentum over bigger obstacles, but capabilities across the entire e-cycling continuum have ramped up massively. This has put a whole new set of performance - and safety - demands on bikes and their components. People are riding farther, faster, and hauling more gear across more varied terrain than ever before and they need proven, high-performance suspension that can handle this new range of needs. RAIL Damper: RAIL damper is a simplified version of Fox Suspension's renowned GRIP damper. It offers an unmatched ride feel combined with bombproof durability and easy-to-use on-the-fly adjustment ranging from wide open to fully locked out.Manufacturer's Part Numbers: 910-20-210 Black 29" QR110 100mm 51mm 910-21-045 Black 29" QR110 140mm 51mm 910-20-211 Black 27.5" QR110 120mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory Fit4 ForkThis race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 1965gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately).Manufacturer's Part Numbers: 910-20-243 Black 27.5" QR110 160mm 44mm 910-20-238 Black 29" QR110 150mm 51mm 910-20-237 Black 29" QR110 150mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory Grip 2 ForkThis mountain bike (MTB) suspension fork is engineered for the demands of modern trail riding. It's part of Fox Suspension's renowned Factory Series, which means that it comes feature-packed and is designed to exceed the demands of Factory-level riders. Another highlight is its genuine Kashima coating on its upper tubes that provides slippery smooth and ultra-durable performance as you carve your way around the mountain. Boasting a wide range of adjustments from its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC), this model makes it simple to dial in your ideal settings for smooth shock absorption and control on your ride.MTB Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Features: Upper Tube Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Air Spring: Float EVOL Damper: GRIP2 with dual Variable Valve Control (VVC) Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks Steerer Diameter: 1.5" tapered Compatible Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Starting Weight: 1965gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Manufacturer's Part Numbers@ 910-20-235 Black 29" QR110 160mm 51mm 910-20-234 Orange 29" QR110 160mm 44mm 910-20-233 Black 29" QR110 160mm 44mm 910-20-242 Black 27.5" QR110 160mm 44mm 910-20-241 Black 27.5" QR110 160mm 37mm 910-20-240 Orange 27.5" QR110 160mm 44mm 910-20-236 Black 29" QR110 150mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 32 Float SC Factory Fit4 Remote ForkThis mountain bike (MTB) suspension fork is specifically tailored for the rigours of cross country racing and features Fox Suspension's prestigious Step Cast chassis. Its Step Cast design offers a pioneering lower leg shape that isn't just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. Ready for the most demanding of cross country (XC) racing situations, this version is also kitted out with a lightweight Float EVOL air spring and a FIT4 2-position remote actuated damper (remote sold separately) for easy adjustment and fine-tuning to match your riding style. Part of the brand's renowned Factory Series, this model comes complete with a genuine Kashima finish on its upper tubes for slippery smooth, ultra-durable performance as you race for the podium.FIT4 2-Position RemoteIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides two on-the-fly compression damping positions (Open and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Lightweight Float Air Spring SystemThis model's Float EVOL air spring automatically equalises the positive and negative air chambers for increased sensitivity and traction, regardless of the air pressure setting. Riders can fine-tune the characteristics of the positive air spring by using volume spacers.Please note: A remote is sold separately for this product.Features: Upper Tubes Finish: Genuine Kashima Coat Use: Cross Country (XC) Axle: Kabolt (multiple options available) Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: FIT4 2-Position Remote with adjustment Remote Included: No, available separately Travel: 100mm Brake Rotor Compatibility: 160mm Direct Post Mount (27.5" Option up to 180mm compatible; 29" Option up to 203mm compatible) Starting Weight: 1387gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Two on-the-fly compression damping positions Open, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Lightweight FIT4 Closed Cartridge System: Lightweight version of Fox Suspension's patented FIT4 closed cartridge system. The weight-optimised design uses a detailed aluminium piston, intricate material removal and consolidated parts design to make it lighter. Narrow Chassis: The chassis is 10mm narrower than the typical 32 design. Shorter Upper Tube Length: The shorter upper tube length raises the floor of the magnesium lower leg, creating a hollow lower section and a lighter overall system.Manufacturer's Part Numbers: 910-21-041 Black 27.5" KB100 100mm 44mm 910-21-040 Black 27.5" KB110 100mm 44mm 910-21-038 Black 29" KB110 100mm 44mm 910-21-036 Black 29" KB110 100mm 51mm 910-21-035 Orange 29" KB110 100mm 44mm 910-21-034 Orange 29" KB110 100mm 51mm 910-21-039 Black 29" KB100 100mm 44mm 910-21-037 Black 29" KB100 100mm 51mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ritchey Comp Drop In Integrated HeadsetThe COMP level components are designed to bring competition worthy components down to a price that everyone can handle. You wont find carbon here, but you will find the kind of performance and reliability you expect from Ritchey.The Ritchey mountain saddle line, called Marathon, in honor of the grueling endurance style x/c racing is a relative new line up for us. Our product managers in Switzerland challenged themselves to create a saddle they would use for traversing the rugged Alps while still looking svelte after a hard day on the trail. 35% carbon content in the base shell provides the toughness you expect combined with hi-density superlight foam for comfort make the Marathon series a true blue friend only your backside can appreciate.Features:A fully integrated drop in headsetComp alloy top bearing coverSemi cartridge bearings Supplied with Ritchey high quality alloy star nut and top capBlack FinishFits tapered headtubes 1.1/8 to 1.5Weight: 133g16.4mm stack height Top cover O/D - 46mmUpper S.H.I.S - IS42/28.6Lower S.H.I.S - IS52/40Upper bearing O/D - 41.8mmLower Bearing O/D - 52mmBuy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tapered Integral Headset (ZS44 - ZS56)Hope’s integral headset delivers smooth and reliable rotation on every ride. With multiple seals to protect it from water and dirt ingress and fully sealed cartridge bearings, its smooth performance will last too. To further increase its durability, the cups, crown race and taper ring are all made from 2014 T6 Aluminium. It compatible with MTB frames with tapered headtubes and suspension forks with tapered steerer tubes.Reasons to Buy: Delivers a smooth and reliable rotation. Mutliple seals for added protection. Increased durability.Features: Cup Material: Machined Aluminium Steerer Size: 1 1/8" - 1.5" tapered Headtube Type/Internal Size - Top: Integral (43.95mm) Headtube Type/Internal Size - Bottom: 1.5" Integral (55.9mm) Bearings: Custom made Stainless Steel, sealed cartridge bearings Extra Features: Hed Doctor included (top cap system) Can be used with straight 1 1/8" forks with additional conversion crown (sold separately) Split crown race for easy installation and removal Multiple seals to keep out the elements Manufacturer's Reference Code: HSTN Weight: 128gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.