Simple and easy to fit under any handlebar tape, this is an effective way of customising the level of comfort for your ride.
Uneven surfaces, rough asphalt, cobblestones… The stresses coming from the road are transmitted directly to the handlebar in the form of unpleasant vibrations, which in short time can turn into annoying tingling to the hands, compromising comfort and grip on the handlebar, with inevitable negative repercussions also on performance and safety.To be able to absorb and reduce them to the minimum, you need a handlebar with “muscles”: a simple but brilliant idea introduced by the Shock-Absorber Kit by Selle Italia.Shock-Absorber Kit consists of two elements: Bar Pads and SG-Tape.SG-Tape is a special tape with grip that allows you to ensure even greater comfort and better grip on the handlebar, bringing advantages in both performance and safety on the saddle.The Bar Pads are made up of three layers of different materials: the first, in gel, helps to simulate the behavior of a muscle, compressing at the support and recovering in a few seconds the original shape, as soon as the pressure of the hand is removed. Besides the gel layer, the addition of PU Foam and a third Lycra layer help to increase the softness of the Bar Pads.The Shock-Absorber Kit by Selle Italia, thanks to the combination of the bar pads with the special tape with grip, ensures a high level of comfort at all times, while also offering a better grip on the handlebar, all to the benefit of performance and safety.Thanks to the particular assembly of these two components, the Shock-Absorber Kit, in addition to being one of the lightest on the market, also performs a combined action that produces a very effective absorption of vibrations from the ground, the ultimate solution to the discomfort caused to hands and wrists by driving in difficult conditions, so far difficult to solve.
Ideal clear protection tape for frames and other areas of cable rub. Easy application and easy cut material for fit on all frames.TEK Tape Frame ProtectorClear - Self-adhesive Frame protector film (Roll),0.2mm thick,Gloss finish,.3 sizes50mm x 1.5m,75mm x 1.5m,100mm x 1.5m.
Key Features: Shape: Straight Blades, Fork Length: 375mm, Steerer: 1-1/8" Top -1 1/2" Bottom UD Carbon, Material: Toray T700 UD Carbon, Finish: UD Carbon with Clear-Coat lacquer, Crown Dia: 56mm, Dropouts: Carbon with Alloy inserts, Axle: 12mm thru axle, Rake: 45mm Offset, Weight: 450g.
A icon returns. In 1997, the Marzocchi Bomber Z1 burst onto the scene and bucked all contemporary trends. The flavours of that decade included rubber springs and feathery weights. The Z1 brought oil, coils and massive stanchions - it unapologetically prioritized grip and ride quality over just about everything else. The return of Z1 brings back these same priorities in a robust 6000-series alloy 36mm chassis with a super plush air spring and proven GRIP damper.Key Features:36mm single crown chassis with new Marzocchi Bomber Z1 lower legs.,EVOL air spring with adjustable volume.,FIT GRIP Sweep damper with adjustable compression and rebound damping..Specification:Stanchion: 36mm.,Travel: 140-170mm (29") / 150-180mm (27.5").,Air Spring: EVOL.,Damper Options: FIT GRIP.,Axle Options: 15QR x 110mm.,Steerer: 1.5 Taper.,Colour Options: Matte Black..
Riders have been asking for it, Marzocchi heard the call and has proudly delivered.The new Z1 Coil builds on the legacy of the single crown fork that started the revolution way back in the 90s the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers.Key Features:Chassis: 36mm.,Travel:160mm, 170mm (29 only).,170mm, 180mm (27.5 only),.,Wheel: 27.5 or 29.,Axle: 15QRx110.,Damping: GRIP (compression + rebound).,Spring: Tempered Silicone-Chromium Steel.,Steerer: 1.5 Tapered Aluminum.,Stanchions: Ø36mm Black Anodized.,Rake: 44mm.,Colour: Matte Black or Gloss Red..
Plaintouch is Prologo's classic bar tape with self adhesive backing, made with real corkThe use of cork ensures a much higher resistance to wear and longer life span compared to similar products on the market.Supremely comfortable with a smooth finish.Supplied with PROLOGO bar end caps and finishing tape.
Key Features:Forged chromoly spindle for JIS square taper,Industrial 6002KRS cartridge sealed bearings with oversized 3/16 balls,Steel cups with double seals for water and dirt protection.
Key Features:Cork tape for comfort and feel, in miltiple colour options to coordinate with all bikes.,Syntehtic/natural cork hybrid.,With gel on the inner side.,One size fits all.,Colours: Black, Yellow, Red Blue.,Textured surface. Black version embossed with grey FSA logo.,Weight: 74g.
Prologo's patented Doubletouch tape is the first variable thickness bar tape made with two distinct hand zones: comfort and grip.Standard thickness Strongtouch on the lower section of the tape specifically for the drops gives a direct feel and firm grip when sprinting. The upper section of the tape features Geltouch double thickness material with an internal gel strip, giving a comfortable rounded feel with added vibration dampening.When you open a packet of Doubletouch tape you will notice each tape is labelled "L"? for left or "R"? for right to aid the installation process.Supplied with PROLOGO lockable bar end caps and finishing tape. To install the locking bar ends, simply take off the branded cap cover, insert the bar end into your taped handlebar, lock into place with a Allen key and click the cover back into place.
Tifosi 1 1/2-1 1/8 Full carbon gravel disc fork with clearance for mudguards and eyelets.The steerer is 300mm uncut.The max tyre size is 54mm wide - 45c or 2" approxKey Features: Shape: Straight Blades, Fork Length: 400mm, Steerer: 1-1/8" Top -1 1/2" Bottom, Carbon, Material: Toray T700 UD Carbon, Finish: UD Carbon with Clear Coat Lacquer, Crown Dia: 56mm, Dropouts: Carbon with Alloy inserts., Axle: 12mm thru axle, Rake: 50mm Offset, Weight: 480g.
Key Features:1.1/8", 36°×45° ACB,For tapered 50mm/62mm OD Head Tube,1.1/8" to 1.5" steerer,Alloy top cover,Upper: Forged alloy cup with ACB (blue seal),Lower: 1.5" CNC machined alloy cup with ACB (blue seal),Stack height: 16.9 + 2.9 = 19.8mm,Weight: 129.6g.