Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Grip Tape and Moto Foam BundleJacy Shumilak, Sam Hills mechanic is always looking for ways to improve Sam's bike. Jacy has been adding grip tape to Sam's shifters and levers to give him maximum grip when riding. He has also been adding moto foam to those hard to get at areas where mud likes to gather. The moto foam helps keep mud out but the open cell design allows water to flow through so it does not get heavier. This foam can be easily removed during maintenance and cleaned with fresh water.This bundle is for 10cm x 10cm of grip tape and 30cm x 30cm of moto foam which allows you to easily get that professional setup on your own bike.How to use:Grip tape - Cut to size and stick on contact areas for maximum grip.Moto foam - Cut to size and place in areas like crank spindle or bottom of your steerer tube to keep mud out. This open cell foam will not absorb water but will keep mud out.Features: Includes: Nukeproof grip tape and Moto foam Grip Tape: 10x10cm Moto Foam: 30x30cm Use: MTB Professionally set up your bikeBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails.One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. Instructions for Use: Remove any old tape and sealant residue,Ensure rim is clean and dry,Start opposite the valve hole and maintain tension as you apply tape,Work air bubbles out as you tape the wheel (Push them out via the spoke holes),Apply one layer of tape with a 4" overlap,Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim,Pierce a small hole and insert your valve,.Features:Length: 10mSuitability: Downhill, Enduro
Introducing the ODI Performance Bar Tape 2.5mm. This ultra-lightweight (50g/set) bar tape is designed to provide the optimal combination of comfort and control. The tape is backed a shock reducing foam that absorbs vibration while maintaining a thin profile.Soft and Tacky Elastomeric Surface Layer30mm x 2,100mmAvailable in 6 coloursPackage includes end plugs and finishing tape
Introducing the ODI Performance Bar Tape 2.5mm. This ultra-lightweight (50g/set) bar tape is designed to provide the optimal combination of comfort and control. The tape is backed a shock reducing foam that absorbs vibration while maintaining a thin profile.Soft and Tacky Elastomeric Surface Layer30mm x 2,100mmAvailable in 6 coloursPackage includes end plugs and finishing tape
Introducing the ODI Performance Bar Tape 2.5mm. This ultra-lightweight (50g/set) bar tape is designed to provide the optimal combination of comfort and control. The tape is backed a shock reducing foam that absorbs vibration while maintaining a thin profile.Soft and Tacky Elastomeric Surface Layer30mm x 2,100mmAvailable in 6 coloursPackage includes end plugs and finishing tape
Introducing the ODI Performance Bar Tape 2.5mm. This ultra-lightweight (50g/set) bar tape is designed to provide the optimal combination of comfort and control. The tape is backed a shock reducing foam that absorbs vibration while maintaining a thin profile.Soft and Tacky Elastomeric Surface Layer30mm x 2,100mmAvailable in 6 coloursPackage includes end plugs and finishing tape
Introducing the ODI Performance Bar Tape 2.5mm, designed to provide the ultimate in control, comfort and shock absorption. This Tape features a unique 3-Ply construction with two shock absorbing layers each with a different density and an extra tacky surface layer. This unique design reduces vibrations transferred to the hands while also offering exceptional grip.Soft and Tacky Elastomeric Surface LayerPackage includes end plugs and finishing tape30mm x 2,100mmLightweight & WashableAvailable in 4 colours
Introducing the ODI Performance Bar Tape 2.5mm. This ultra-lightweight (50g/set) bar tape is designed to provide the optimal combination of comfort and control. The tape is backed a shock reducing foam that absorbs vibration while maintaining a thin profile.Soft and Tacky Elastomeric Surface Layer30mm x 2,100mmAvailable in 6 coloursPackage includes end plugs and finishing tape
Introducing the ODI Performance Bar Tape 2.5mm. This ultra-lightweight (50g/set) bar tape is designed to provide the optimal combination of comfort and control. The tape is backed a shock reducing foam that absorbs vibration while maintaining a thin profile.Soft and Tacky Elastomeric Surface Layer30mm x 2,100mmAvailable in 6 coloursPackage includes end plugs and finishing tape
Introducing the ODI Performance Bar Tape 2.5mm, designed to provide the ultimate in control, comfort and shock absorption. This Tape features a unique 3-Ply construction with two shock absorbing layers each with a different density and an extra tacky surface layer. This unique design reduces vibrations transferred to the hands while also offering exceptional grip.Soft and Tacky Elastomeric Surface LayerPackage includes end plugs and finishing tape30mm x 2,100mmLightweight & WashableAvailable in 4 colours