Inspired by the original Wire Tap, Wire Tap 2.0 fuses an original, unique angular design with durable C-5™ frame material, in an ultra-lightweight architecture. The sport wrap-inspired design, with integrated Unobtainium® earsocks for a no-slip grip, makes this frame ideal for an array of off the field activities. When combined with Prizm™ Lens Technology or Oakley Authentic Prescription lenses, Wire Tap 2.0 embodies cutting-edge style.• ANGULAR DESIGN - Angular design inspired by Oakley’s design heritage in wire frames.• LIGHTWEIGHT FRAME - Constructed of ultra lightweight, C-5™ metal material.• ALL DAY COMFORT - Integrated Unobtainium® earsocks designed to help provide all day comfort and retention.• SEE MORE DETAILS - Available with Prizm™ lenses that are designed to enhance color, contrast so you can see more detail.• AVAILABLE IN PRESCRIPTION - Available with Oakley Authentic Prescription lenses that come laser etched with the ellipse logo on left wearing lens for proof of Oakley authenticity and quality.
This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails.One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. Instructions for Use: Remove any old tape and sealant residue,Ensure rim is clean and dry,Start opposite the valve hole and maintain tension as you apply tape,Work air bubbles out as you tape the wheel (Push them out via the spoke holes),Apply one layer of tape with a 4" overlap,Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim,Pierce a small hole and insert your valve,.Features:Length: 10mSuitability: Downhill, Enduro
Nukeproof Grip Tape and Moto Foam BundleJacy Shumilak, Sam Hills mechanic is always looking for ways to improve Sam's bike. Jacy has been adding grip tape to Sam's shifters and levers to give him maximum grip when riding. He has also been adding moto foam to those hard to get at areas where mud likes to gather. The moto foam helps keep mud out but the open cell design allows water to flow through so it does not get heavier. This foam can be easily removed during maintenance and cleaned with fresh water.This bundle is for 10cm x 10cm of grip tape and 30cm x 30cm of moto foam which allows you to easily get that professional setup on your own bike.How to use:Grip tape - Cut to size and stick on contact areas for maximum grip.Moto foam - Cut to size and place in areas like crank spindle or bottom of your steerer tube to keep mud out. This open cell foam will not absorb water but will keep mud out.Features: Includes: Nukeproof grip tape and Moto foam Grip Tape: 10x10cm Moto Foam: 30x30cm Use: MTB Professionally set up your bikeBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Jacy Shumilak, Sam Hills mechanic is always looking for ways to improve Sam’s bike. Jacy has been adding grip tape to Sam’s shifters and levers to give him maximum grip when riding. He has also been adding moto foam to those hard to get at areas where mud likes to gather. The moto foam helps keep mud out but the open cell design allows water to flow through so it does not get heavier. This foam can be easily removed during maintenance and cleaned with fresh water. This bundle is for 10cm x 10cm of grip tape and 30cm x 30cm of moto foam which allows you to easily get that professional setup on your own bike. How to use: Grip tape – Cut to size and stick on contact areas for maximum grip. Moto foam – Cut to size and place in areas like crank spindle or bottom of your steerer tube to keep mud out. This open cell foam will not absorb water but will keep mud out.
Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 – 3mm wider than your inner rim width. Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valve
The Muc-Off Tubeless Rim tape is made from their own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m and 50m workshop roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims. Image for illustration purposes only
Muc-Off Tubeless Rim Tape Roll (10m)This 10m roll of rim tape features Muc-Off's own proprietary performance material with a pressure-sensitive adhesive, which provides just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. This model's semi-transparent material also makes locating the valve hole easy. Supplied with four seal patches and available in six width options to choose from to suit most road, cyclocross (CX), gravel, mountain bike (MTB) and plus-sized rims.What Size Rim Tape Do I Need?The tubeless rim tape that you go for should be matched up with the size of your wheel's internal rim width. You should be able to find this measurement on the inside of your rim, or alternatively check your bike's manufacturer's guide online. Failing that, it's time to dig out a trusty ruler and measure it yourself!If your rim width doesn't match up exactly with Muc-Off's sizes below, just go for the next size up.As a General Guide:Road/Gravel (17 & 21mm)XC/Trail (25mm)DH/Enduro (28 & 30mm)DH/Enduro Wide (35mm)Features: Comes as 10m roll - allowing for 4 applications Pressure-sensitive adhesive, creating the ultimate seal Semi-transparent to easily locate the valve hole Comes with 4x seal patchesTechnologies: The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole. Infamous Muc-Off pink so even the inside of your rims stay looking fresh. Comes with four seal patches, so you're never caught short. Available in 6 different widths (please select option from the drop-down menu) to suit most Road, CX, Gravel, MTB and Plus-sized rims. Extreme strength and durability. Pressure-sensitive adhesive ensures the ultimate air-tight seal. Engineered to stretch to fit perfectly in the contour of your rim. Comes as 10m roll - allowing for 4 applications.Manufacturer's Part Numbers: 20068 Black 17mm 20069 Black 21mm 20070 Black 25mm 20071 Black 28mm 20072 Black 30mm 20073 Black 35mmBuy Muc-Off Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.