Effetto Mariposa Carogna Tubular Tape Remover (150ml) Making the removal of tub tape or glue less bothersome the Carogna Tubular Tape Remover uses a new breed of chemical that is neither smelly or dangerous. Easily spread with a brush it effectively dissolves mastic for easy removal using just a cloth. Features:Remover will dissolve the mastic, making it easy to remove with a clothCarogna Remover, thanks to its high viscosity, can be spread on the rim gluing surface with a brushNot smelly nor dangerous, the remover uses a new breed of chemicalsBuy Effetto Products from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shelter is a self-adhesive, transparent protection with visco-elastic behaviour that protects carbon-fibre or metal structures it’s applied to. Available in two versions, Road and Off-Road, and three different formats each (Kit, Pack and Roll).Off Road - 1.2mm thick,Road - 0.6mm thick.Shelter Tape Off Road Kit Contains the following cut outs: 1 x Down Tube, 1 x Chain Stay, 1 x Top Tube/ Head Tube, 5 x Cable/ Hose spots.Shelter Tape Road Kit Contains the following cut outs:1 x Down Tube, 1 x Chain Stay, 8 x Cable spots, 4 presta valve hole (to reduce noise).Shelter Tape Road Pack and Off Road Pack contain:Two 54mm x 500mm lengths to be custom cut to your needs.Shelter Tape Road Roll and Off Road Roll contain:One 54mm x 5m length to be custom cut to your needs.Shelter tape is a multi-layer acrylic protection tape which dissipates any impact energy on two axisEach layer spreads loads vertically and horizontally, the impact energy decreases at each layer, protecting the bike framePerfect for carbon frames where the surface epoxy resin can be brittle and sensitive to impactsThe tape is clear, does not hide graphics and can be applied easily
While the bigger, more common 3.5mm Plug is great for bigger punctures on mtb tyres, several times a 1.5mm Plug is enough for smaller damages or road/gravel Tyres: having both available is simply better. The somehow bad reputation of 1.5mm plugs, unable to fix punctures, is due to the common mistake of using these small Plugs with big Forks… opening the hole more than size of the plug. The tiny, dedicated Fork of Tappabuco 1.5 prevents this occurrence.
Tappabuco is a Tyre Plug tool ideal for repairing punctures in Tubeless Tyres. Designed to work as an end-plug for Road and Mountain Bike Handlebars, these tubeless tyre plugs can be carried inside most Shimano and SRAM Bottom Brackets too (it fits holes with inner diameter between 15 and 20 mm). This tubeless tyre repair kit is easy to carry and fast to use.Why We Created ItTyre Plugs have become a standard way of fixing bigger punctures in Tubeless Tyres. With “Tappabuco” (Italian for stopgap or literally hole plugger) Effetto Mariposa wants to offer a practical solution for road and off-road riding, easy to carry and fast to use.Easy to CarryTyre Plug tools have to be easily reached in case of puncture but – because of their sharp shape – they should be stored in a safe way. Tappabuco solves this, as it’s designed to work as end-plug for road and mountain bike handlebars, and it can be carried inside most Shimano and SRAM Bottom Brackets too (it will fit holes with inner diameter between 15 and 20 mm). Keeping the Rubber Tyre Plug already in the Tappabuco Fork ensures fast puncture repairing of Tubeless Tyres.LightweightTappabuco is made of high density Silicone with a Stainless Steel Fork, for maximum durability and adaptability. Weight is just 13g for Tappabuco 3.5 and 11g for Tappabuco 1.5.Replacement Plugs can be kept on Tappabuco, keeping them as 5pcs card and inserting the Fork between two Plugs (the picture helps see it).Specific Version for 1.5 or 3.5mm PlugsTappabuco is available in two versions:Tappabuco 1.5:Optimized for tyre plugs 1.5mm of section, 50mm length.Tappabuco 3.5:Optimized for tyre plugs 3.5mm of section, 50mm length.While the bigger, more common 3.5mm Plug is great for bigger punctures on mtb tyres, several times a 1.5mm Plug is enough for smaller damages or road/gravel Tyres: having both available is simply better. The somehow bad reputation of 1.5mm plugs, unable to fix punctures, is due to the common mistake of using these small Plugs with big Forks… opening the hole more than size of the plug. The tiny, dedicated Fork of Tappabuco 1.5 prevents this occurrence.VersionsThree kits are available.Tappabuco 1.5 KIT:Tappabuco 1.5 + 5pcs 1.5mm Plugs.Tappabuco 3.5 KIT:Tappabuco 3.5 + 5pcs 3.5mm Plugs.Tappabuco 1.5 + 3.5 KIT:Tappabuco 1.5 + Tappabuco 3.5 + 5pcs 1.5mm Plugs + 5pcs 3.5mm Plugs.
Replacing standard rim-tape, Caffélatex Tubeless Tape perfectly adapts to rim internal profile and makes standard rims air-tight, sealing spoke holes.It allows tubeless conversion of most standard mountain bike and CX wheels, using Tubeless, Tubeless-Ready, 2Bliss or TNT (Tube No Tube) tyres and Caffélatex sealant.Key Features:Made of polyester: the best material for technical tapes, with very high mechanical properties.,Stable: it easily conforms to rim shapes and has low memory (it doesn’t ‘spring back’ once put down in the rim channel).,Adhesive Strength: State of the art. The adhesive can stick to silicone-treated paper and is much more tolerant to less than perfect rim cleaning before tape application,Sealed: to preserve the tape properties and to underline its “technical product” status, each tape is now contained into a re-sealable bag..As all our products, it’s made in Italy.WARNING:Use a sharp spike or a screwdriver to make a round hole in Caffélatex Tubeless Tape at the valve hole. AVOID using a cutter knife and doing an “X” cut, that would prevent proper air-tightness at the valve base.Three different widths are available:Small: for rims with external section between 20 and 24 mm;,Medium: for rims with external section between 25 and 29 mm.,Large: for rims with external section between 30 and 34 mm.,Length: 8 metres long - will tape four wheels.
Carogna double sided adhesive tape for Tubulars bridges the gap between previously existing tapes and mastic in terms of gluing performance and heat-resistance.• Extremely easy to use compared to mastic.• Very reliable adhesion, in any condition.• Once removed, Carogna leaves the rim ready for the next gluing, without additional cleaning.• Works for Road and Cyclocross.• Also available in very convenient Shop Rolls.Why We Created It:We started developing Carogna (pronounced “car-own-ya”) double sided adhesive Tubular Tape with a clear and ambitious goal: to bridge the gap between previously existing tapes and mastic in terms of gluing performance and heat-resistance, while retaining all the advantages of tapes.In addition to this, we gave specific additional consideration to Cyclocross and MTB Tubulars, where specific features are needed from the gluing standpoint.Universal Performance:Carogna has been tested and is designed to perform flawlessly on any rim material (Aluminium, Carbon), with any Tubular (seamless, handmade, vulcanized sew-ups…), on and off-road.Specific Adhesive Properties on Rim and Tubular:Two Application-Specific SidesSemi-structural and removable on the rim-side: adhesion is guaranteed by industrial-grade acrylic glue, native to the base tape; this means that when removing the Tubular (breaking its bond with the rim), the acrylic glue will stay on the tape, not on the rim. Acrylic has a good adhesion on both Aluminium and Carbon without any specific surface preparation.Permanent on the Tubular SideThere’s a 1 mm-thick layer of a recently-developed permanent glue for underwater applications. This thick glue film will move and spread when the Tubular is first inflated, ensuring optimized contact with any Tubular base tape geometry. Humidity is obviously not an issue, and this glue adheres well to any kind of base tape material (nylon, cotton, poly-cotton) or external finishing (raw, brushed, or coated by neoprene).Wide Temperature Range in UseOnce adhesion is set, the use at low temperatures (down to -40°C) is not a problem. Thermal resistance of all materials used in the manufacture of Carogna was a high priority: Carogna will provide a perfect bonding at 150°C for extended periods (hours), exceeding the heat-resistance of even the best mastics and widely exceeding the heat-resistance of any other tubular tapeOptimized Adhesive Surface:Adhesion is very strong and uniform across the whole circumference of the rim for all Tubulars and it is also uniform across the tubular base tape. One short-coming of tubular tape to-date has been limited adhesion at the edges of the base tape or in the centre of Tubulars with a raised centre seam. Carogna solves these problems.Temperature Range When MountingIdeal thermal range for application of Carogna is between 21°C and 38°C (70 to 100°F), allowing 8 hours to reach 80% of the adhesive strength . Applying the tape below 10°C is not recommended. We recommend cleaning surfaces (rim and tubular base tape) using iso-propylic alcohol or mineral spirits.
Replacing standard rim-tape, Caffélatex Tubeless Tape perfectly adapts to rim internal profile and makes standard rims air-tight, sealing spoke holes.It allows tubeless conversion of most standard mountain bike and CX wheels, using Tubeless, Tubeless-Ready, 2Bliss or TNT (Tube No Tube) tyres and Caffélatex sealant.Key Features:Made of polyester: the best material for technical tapes, with very high mechanical properties.,Stable: it easily conforms to rim shapes and has low memory (it doesn’t ‘spring back’ once put down in the rim channel).,Adhesive Strength: State of the art. The adhesive can stick to silicone-treated paper and is much more tolerant to less than perfect rim cleaning before tape application,Sealed: to preserve the tape properties and to underline its “technical product” status, each tape is now contained into a re-sealable bag..As all our products, it’s made in Italy.WARNING:Use a sharp spike or a screwdriver to make a round hole in Caffélatex Tubeless Tape at the valve hole. AVOID using a cutter knife and doing an “X” cut, that would prevent proper air-tightness at the valve base.Widths:“S” for rims with external section between 20 and 24 mm;“M” for rims with external section between 25 and 29 mm;“L” for rims with external section between 30 and 34 mm.Available versions:20,5 mm x 50 m (S Shop)25 mm x 50 m (M Shop)29 mm x 50 m (L Shop)
The official ENVE tubless kit for your M Series MTB wheels features custom-cut tapes and valves for a flawless setup.This high quality, simple and functional solution is designed specifically for each M Series wheel rim width to ensure a millimetre-perfect fit. The tubeless valves feature removable cores so you can easily refresh the sealant when required.The kit is suitable for one pair of wheels.
The perfect road bike handlebar tape must do many things: It increases comfort, feels good to the touch, provides a secure grip and delivers precise and direct control. The Ergon BT Road – with its 2 mm thickness and a fine, straight surface texture – offers allroad cyclists the perfect all-in-one solution. Pressure on the hands is reduced, vibration and shock is damped and riding pleasure and performance are greatly improved. The bar tape can be wrapped to individual preferences – thinner/thicker or increased/decreased grip texture – as wrap positioning guide marks are incorporated into the bar tape surface pattern.Reduces hand discomfort and damps vibration,Direct ride feel, adapted freedom of movement,Less fatigue, more riding fun and performance.
Allroad riders want more. Their ideal handlebar tape should reduce discomfort on various road surfaces, feel good to the touch, provide a secure grip and deliver total direct control. The Ergon BT Allroad with its 2.5 mm thickness and a medium coarse, counter-angled surface texture, offers the ideal all-in-one solution. Pressure on the hands is reduced, vibration and shock is damped and riding pleasure and performance are greatly improved. The bar tape can be wrapped to individual preferences – thinner/thicker or increased/decreased grip texture – as wrap positioning guide marks are incorporated into the bar tape surface pattern.Reduces hand discomfort and damps vibration,Direct ride feel, increased grip,Less fatigue, more riding fun and performance.
Add a touch of carbon to your handlebars with the ETC Carbon Look Bar Tape. Includes bar ends.