Fox Suspension 36 Float Factory Fit4 ForkThis race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 1965gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately).Manufacturer's Part Numbers: 910-20-243 Black 27.5" QR110 160mm 44mm 910-20-238 Black 29" QR110 150mm 51mm 910-20-237 Black 29" QR110 150mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory Grip 2 ForkThis mountain bike (MTB) suspension fork is engineered for the demands of modern trail riding. It's part of Fox Suspension's renowned Factory Series, which means that it comes feature-packed and is designed to exceed the demands of Factory-level riders. Another highlight is its genuine Kashima coating on its upper tubes that provides slippery smooth and ultra-durable performance as you carve your way around the mountain. Boasting a wide range of adjustments from its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC), this model makes it simple to dial in your ideal settings for smooth shock absorption and control on your ride.MTB Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Features: Upper Tube Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Air Spring: Float EVOL Damper: GRIP2 with dual Variable Valve Control (VVC) Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks Steerer Diameter: 1.5" tapered Compatible Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Starting Weight: 1965gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Manufacturer's Part Numbers@ 910-20-235 Black 29" QR110 160mm 51mm 910-20-234 Orange 29" QR110 160mm 44mm 910-20-233 Black 29" QR110 160mm 44mm 910-20-242 Black 27.5" QR110 160mm 44mm 910-20-241 Black 27.5" QR110 160mm 37mm 910-20-240 Orange 27.5" QR110 160mm 44mm 910-20-236 Black 29" QR110 150mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 32 Float SC Factory Fit4 Remote ForkThis mountain bike (MTB) suspension fork is specifically tailored for the rigours of cross country racing and features Fox Suspension's prestigious Step Cast chassis. Its Step Cast design offers a pioneering lower leg shape that isn't just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. Ready for the most demanding of cross country (XC) racing situations, this version is also kitted out with a lightweight Float EVOL air spring and a FIT4 2-position remote actuated damper (remote sold separately) for easy adjustment and fine-tuning to match your riding style. Part of the brand's renowned Factory Series, this model comes complete with a genuine Kashima finish on its upper tubes for slippery smooth, ultra-durable performance as you race for the podium.FIT4 2-Position RemoteIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides two on-the-fly compression damping positions (Open and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Lightweight Float Air Spring SystemThis model's Float EVOL air spring automatically equalises the positive and negative air chambers for increased sensitivity and traction, regardless of the air pressure setting. Riders can fine-tune the characteristics of the positive air spring by using volume spacers.Please note: A remote is sold separately for this product.Features: Upper Tubes Finish: Genuine Kashima Coat Use: Cross Country (XC) Axle: Kabolt (multiple options available) Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: FIT4 2-Position Remote with adjustment Remote Included: No, available separately Travel: 100mm Brake Rotor Compatibility: 160mm Direct Post Mount (27.5" Option up to 180mm compatible; 29" Option up to 203mm compatible) Starting Weight: 1387gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Two on-the-fly compression damping positions Open, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Lightweight FIT4 Closed Cartridge System: Lightweight version of Fox Suspension's patented FIT4 closed cartridge system. The weight-optimised design uses a detailed aluminium piston, intricate material removal and consolidated parts design to make it lighter. Narrow Chassis: The chassis is 10mm narrower than the typical 32 design. Shorter Upper Tube Length: The shorter upper tube length raises the floor of the magnesium lower leg, creating a hollow lower section and a lighter overall system.Manufacturer's Part Numbers: 910-21-041 Black 27.5" KB100 100mm 44mm 910-21-040 Black 27.5" KB110 100mm 44mm 910-21-038 Black 29" KB110 100mm 44mm 910-21-036 Black 29" KB110 100mm 51mm 910-21-035 Orange 29" KB110 100mm 44mm 910-21-034 Orange 29" KB110 100mm 51mm 910-21-039 Black 29" KB100 100mm 44mm 910-21-037 Black 29" KB100 100mm 51mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
North Shore Billet Fox Cable GuideThese finely crafted cable guides are the ultimate accessory for your Fox fork! Now you can colour match your cable guide to the Red and Blue adjustment dials, your frame colour, your stem colour….. pretty much anything! Features: 2008 - 2014 Fox 32, 34, & 36 Forks Supplied with (1) M3 X 8 screw Material: CNC machined from 6061 T6511 aluminium Weight: 2 gramsBuy North Shore Billet Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
North Shore Billet Fox Cable GuideThese finely crafted cable guides are the ultimate accessory for your Fox fork! Now you can colour match your cable guide to the Red and Blue adjustment dials, your frame colour, your stem colour….. pretty much anything! Features: 2008 - 2014 Fox 32, 34, & 36 Forks Supplied with (1) M3 X 8 screw Material: CNC machined from 6061 T6511 aluminium Weight: 2 gramsBuy North Shore Billet Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
North Shore Billet Fox Cable GuideThese finely crafted cable guides are the ultimate accessory for your Fox fork! Now you can colour match your cable guide to the Red and Blue adjustment dials, your frame colour, your stem colour….. pretty much anything! Features: 2008 - 2014 Fox 32, 34, & 36 Forks Supplied with (1) M3 X 8 screw Material: CNC machined from 6061 T6511 aluminium Weight: 2 gramsBuy North Shore Billet Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
North Shore Billet Fox Cable GuideThese finely crafted cable guides are the ultimate accessory for your Fox fork! Now you can colour match your cable guide to the Red and Blue adjustment dials, your frame colour, your stem colour….. pretty much anything! Features: 2008 - 2014 Fox 32, 34, & 36 Forks Supplied with (1) M3 X 8 screw Material: CNC machined from 6061 T6511 aluminium Weight: 2 gramsBuy North Shore Billet Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou MILO Remote Assembly Kit Genuine Manitou Remote Assembly Kit Features: Designed to fit 2011 Manitou Forks with Milo capabilities Buy Manitou MILO Remote Assembly Kit 2012 from Chain Reaction Cycles, the World's Largest Online Bike Store.
North Shore Billet RockShox Cable GuideThese finely crafted cable guides are the ultimate accessory for your RockShox fork! Now you can colour match your cable guide to the Red and Blue adjustment dials, your frame colour, your stem colour….. pretty much anything! Features: Suitable for: Fits 2011, 2012, 2013, 2014 RockShox ForksSID RLT TiSID RLTRevelation RLTRevelation RLT TiPikeRebaSektor30 Gold TKSupplied with (1) M3 X 10 screwCNC machined from 6061 T6511 aluminium with protective anodized finishWeight: 3gBuy North Shore Billet Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fenwicks Suspension Lubricant SpraySpecially optimised to ensure your suspension setup stays in top condition, this superb spray reduces friction on your fork and shock. Also great for keeping your dropper post rising and dropping smoothly, this reliable lubricant protects against the build-up of moisture and dirt, maintaining peak performance through the most rugged routes. Features:Suitability: Fork stanchions and rear shock shaftsBuy Fenwicks Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Finish Line Max Suspension Aerosol SprayThis superb suspension spray immediately improves your fork's performance, so you can enjoy fast rebound over bumps and no loss of travel. Additionally, it's made with carefully chosen polysiloxane and advanced fluoropolymers to fight stiction, condition and protect seals, o-rings and other rubber parts. Finally, it improves the surface slip of any stanchion, even ones which are coated.Features: Immediately improve your fork's performance Carefully chosen polysiloxane and advanced fluoropolymers Formulated to fight stiction Conditions and protect seals, o-rings and other rubber parts Improves the surface slip of any stanchion, even ones that are coatedBuy Finish Line Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Finish Line Suspension Fork and Shock OilA race-proven oil by Finish Line, this brilliant bottle ensures your forks and shocks stay in top condition on every ride. Optimised for oil-damped suspension forks, it stops the breakdown of viscosity and stiction while maintaining consistent damping performance on your bold and boisterous journeys. Dependable and durable thanks to its mix of mineral and synthetic oils, this non-foaming fluid is used by pro-riders for a premium and predictable performance. Features: Combines the reliability of mineral oils with the durability of synthetic oils Ideal for all oil-damped suspension systems, seals, and riding conditions Reduces stiction and viscosity breakdown Gives consistent and predictable damping without foaming Buy Finish Line Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.