The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
Long on travel, short on excuses, ZEB Ultimate is a whole new breed of fork, designed to challenge the limits and take on the world’s toughest enduro tracks. Going Ultimate has its advantages and features a stiff 38mm chassis designed with the new Charger 3™ RC2 with vibration-killing ButterCup™ technology. Our highest performing, athlete-proven technologies matched with premium style plays. This is ZEB. Features: 38mm chassis for increased stiffness and rider confidence NEW ButterCups block 20% of high frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. NEW Charger 3™ features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any cross talk . Featuring High Speed Compression, Low Speed Compression, and a revamped Low Speed Rebound, every click is meaningful and exact. This dead silent design allows the rider to truly tune to perfection with every click NEW DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. NEW Ultimate Bushing Package maximizes the fork’s bushing overlap, reducing friction and creating the smoothest ride possible NEW Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. With the press of a button or two, Pressure Relief Valves restore premium fork feel. NEW Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride NEW Bolt-in torque cap adapters now included for the use with standard hub end caps Lightweight machined and anodized crown for premium looks and durability Signature Series graphics package RockShox premium short fender compatibility (RockShox bolt-on fender sold separately) Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel Maxima Plush damping fluid reduces friction and silences damper noise
These MTB forks feature a Charger Race Day damper and a DebonAir air spring, which gives you brilliant comfort and control on the toughest of rides. RockShox has also equipped these with a stunning 32mm straight wall aluminium upper tubing and magnesium lower legs. This makes them an excellent choice of upgrade for superior durability and performance on the most aggressive XC adventures. 32mm chassis focused on light weight for the classic XC bike. Charger Race Day Damper - RockShox's lightest production damper with rock-solid lockout. DebonAir™ air spring is tuned specific to meet the demands of XC and maintains a higher ride height for increased confidence and control. Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. Maxima Plush damping fluid reduces friction and silences damper noise. Machined/anodised crown. 29" wheel only. 100mm max travel. Ultimate foil graphics package.
The Marzocchi Bomber DJ forks are enhanced with the GRIP damper, which delivers lightning-quick reaction times to soak up everything from big hits to trail chatter. This damper is also highly adjustable, so you can dial in your exact preference to suit your riding style and the terrain type. Features Continued: Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end Legendary Bomber durability with 36mm stanchions Buttery and easy-to-use GRIP damper Tapered steerer tube for maximum stiffness Manufacturer Reference Codes: Black: MAZ-912-01-112 Red: MAZ-912-01-111
Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, this enduro fork sets a new benchmark for confidence, performance, and durability. Part of Fox Suspension's Performance Series, it features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides. Enduro Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. FIT GRIP Damper Inspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. - 58mm crown diameter to match modern frame shape profiles. - Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). - 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model. Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mm
Fox Suspension 38 Float Performance Grip ForkPart of Fox Suspension's Performance Series, this enduro fork features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT GRIP DamperInspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, the Fox Suspension 38 Float Performance Grip Fork sets a new benchmark for confidence, performance, and durability. Features: Upper Tubes Finish: Anodised Use: Enduro Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP (3-position on-the-fly adjustability) Adjustments: Compression damping positions Open, Medium, Firm; Additional micro-adjust between settings Detents; Low-speed rebound Travel: 170mm Rake: 44mm Compatible Rotor Size: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 2180gTechnologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways we've further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not. 58mm crown diameter to match modern frame shape profiles. Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model.Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Suspension Onyx SC 29 Boost ForkThis MTB fork is specifically designed for aggressive trail-riding, as it gives you fantastic comfort and control on every ride. It features a tapered alloy upper stanchion construction, which makes it perfect at handling the abuse that's associated with all-day epics in the mountains. DVO has also equipped this trail-ready fork with a magnesium lower stanchion construction. This gives it fantastic strength without adding any unnecessary weight to your mountain bike. The little brother to the Onyx DC, this is the Onyx SC D1. At 180mm of travel, this is our top of the line enduro race fork. Featuring the proven D1 damper, high/low speed compression, rebound, and externally adjustable OTT. With 36mm stanchions and our stiffest chassis yet, charge hard into the roughest sections with confidence.Six clicks of low speed compression give quick access to firming up the fork for pedaling, opening up for descending, and mid settings for everything in between. Over thirty clicks of High Speed Compression give precise control for support on big hits. Shim stack controlled rebound that is 100% dynamic. meaning, the rebound is controlled based on the speed at which oil flows through the system. The fork will react to what you throw at it and be ready for what's next. Our industry exclusive OTT feature really sets DVO product apart from anything else. It allows you to perfectly fine tune how the initial stroke feels without any mid/end stoke compromise. You really do the best of both worlds.Combining the stiff chassis characteristics with our exclusive features and damping design give our forks a unique ride feel unlike anything else on the market.Features: Steerer Material: Tapered Alloy Lower Material: Magnesium Use: MTB Adjustment: High/Low Speed compression, rebound, OTT Travel: 180mm Offset: 44mm Axle to Crown: 92 (at max travels) Stanchions: 36mm tapered Wheel Size: 29" Axle: 15mm Boost Disc: Direct mount, 180mm Weight: 2200g (approx)Buy DVO Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Helping you take your adventures further than ever before, this brilliant version eliminates all moving parts from its design. This means there is zero maintenance while its monocoque carbon fibre structure delivers incredible strength and stiffness. Rigorously tested in Lauf's lab, its springs are constructed from a super-strong S2 glassfibre which is extremely tough during impact and flexible in the direction of the travel. 30mm Travel Gravel Fork Providing you with 30mm of travel with a progressive spring rate, the further this fork compresses the more its springs become stiffer. This means you'll benefit from a more versatile component which prevents bottoming without sacrificing small bump compliance. Working flawlessly in all weather conditions, this is the ultimate choice of upgrade for riders who want top-level front suspension.
Prepared for wherever your next trail-riding adventure takes you, this mountain bike (MTB) suspension fork is feature-packed and designed to exceed the demands of Factory-level riders. Part of Fox Suspension's distinguished Factory Series, this model boasts a genuine Kashima coating on its upper tubes for amazingly smooth, ultra-durable performance. Another highlight is it also benefits from a lightweight Float EVOL air spring as well as a FIT4 damper with quick on-the-fly three-position adjust. Its wide range of adjustments means that you can easily fine-tune your front-end suspension to match your riding style as well as the terrain conditions. With three compression damping positions (Open, Medium and Firm), additional low-speed compression (Open mode adjust) and low-speed rebound, this trail fork is more tuneable and capable than ever before. Trail Fork with Float EVOL Air Spring Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. FIT4 Damper In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Manufacturer's Part Numbers: 910-21-010 Black 29" QR110 130mm 51mm 910-21-007 Black 29" QR110 130mm 44mm 910-21-005 Black 29" QR110 140mm 51mm 910-21-002 Black 29" QR110 140mm 44mm
RockShox has raised the bar with this version by using magnesium for the lower tubes, so you'll benefit from maximum stiffness without any excess weight. Ready to set you soaring down the slopes, their DebonAir spring delivers a plush and predictable riding experience. You'll notice when weaving from trail to trail how the connection between your bike and the terrain becomes seamless as the spring absorbs every impact. What's most impressive is you won't have to worry about any harsh vibrations on your body thanks to how smooth this model performs. Sag Gradients Simple to set-up and maintain, RockShox has installed sag gradients which are printed on these fork's upper tubes. This makes it immensely easy to set the suspension to suit your riding preferences. Instead of wasting time with plastic clips and rulers to keep your suspension fine-tuned, you can now spend more time shredding the trails thanks to its fast and flawless customisation capabilities. Technologies: DebonAir: It is ok to be soft. Debon Air is not ashamed to give way under the weakest push. In fact, it makes shocks plusher than ever, right from the start. It might seem a weakness, until you take DebonAir to the trail. The connection between your bike and the terrain will be seamless, as your DebonAir equipped shock absorbs every little hit without any harsh feeling on your body. A shock so soft, you can push way harder. Charger RC: A durable and simple cartridge style compression damper with a spring backed IFP and bleed port paired with Rapid Recovery rebound damping. Rapid Recovery: Who doesn't want more available wheel travel for successive hits? The Rapid Recovery System allows the shock to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision. This more active suspension system, doesn't pack up and enables the bike to ride in a higher and softer part of the spring rate. Rapid Recovery gives the rider access to more available wheel travel, bump after bump, to achieve a smoother and more controlled ride. Sag Gradients: Don't set your sag correctly, and you might as well be hopping onto someone else's bike. But why bust out plastic clips or rulers to keep your suspension fine-tuned? RockShox sag gradients are printed right on the fork's upper tubes making perfect suspension setup easy and accurate. Power Bulge: When you need your forearms to be stronger for more control, you bulk them up in the gym. When you need more durability from your fork, bulk them up with our Power Bulge. Other companies just increase the stanchion size adding extra weight. Power Bulge simply reinforces the lower leg to allow for an oversized bushing, increasing stiffness and maximizing your ride. Plus, it's called Power Bulge. Bottomless Tokens: With the optional tokens (volume-spacer) the air volume of the fork can be reduced so the spring characteristic curve can be influenced. A smoother suspension with higher end-progression is achieved. Maxle Stealth: The Maxle Stealth thru-axle offers a light, low profile alternative to Maxle Lite and Maxle Ultimate.