The Vitus Rapide FS Upper Shock Bolt Kit contains all the spare parts required to replace the upper shock bolt hardware on all 2021 and 2022 Vitus Rapids FS frames.
The Sommet 29 CRX is a top-level enduro race bike that features Kashima coated Fox Float Factory Series suspension and a Shimano XT 1x12-Speed groupset. This bike glides over rough terrain and finds traction and control in weather conditions, while smoothly shifting across its gear range and ensuring exceptional stopping power. It also rolls upon Tubeless Ready Nukeproof Horizon V2 wheels wrapped in high-grip Maxxis Assegai and Minion DHR II race tyres. Fast and Aggressive All-Terrain Race Mountain Bike The big-hitting Vitus Sommet CRX 29 Mountain Bike is all about the rush. The rush of air, the rush of trees passing you in a blur, the rush of tyres through dirt, the rush of light, the rush of sounds - the brief snapshots that flood your senses and place you deep in the zone. And then there’s the rush that boils up inside you and the feeling of total control as you float from take-off to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last uplift. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. Agile, Durable and Stable Enduro Race Bike The Sommet is a bike that you sit within, not perch on top. It’s a powerful rider position and together you are a team. Eagerly shred the refined berms and manicured obstacles of a trail centre but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of natural features and steep, technical ground. With volume added to the carbon front triangle, stability is rock solid without compromising agility. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. Whether threading the needle through Enduro tape or dropping into your favourite descent, speed comes easily to the Sommet. It thrives in the chaos of steep and turbulent trails. Bringing calm where all around there is frenzy. Key Features: Big-hitting enduro bike with modern geometry Fox 38 and Float X2 Factory Series suspension Shimano XT 1x12 speed drivetrain Powerful Shimano XT 4 piston hydraulic disc brakes Nukeproof Horizon V2 tubeless-ready wheelset with tape applied Confidence-inspiring Maxxis Assegai and Minion DHR II tyres Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile-inducing ride Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear Wheel Size: 29" Suspension Travel (MTB Only): 170mm Front, 162mm Rear Intended Use: Enduro Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 62.5mm, trunnion Fork: Fox 38 Float EVOL Factory Series 29", 170mm travel, Kashima coating, Grip2 damper, 38mm stanchions, 110mm x 15mm bolt through axle, 44mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper & ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9 degree Back Sweep, 31.8mm Clamp Diameter, S & M: 780mm Wide, L & XL: 800mm Wide Stem: Nukeproof Horizon, 6061 Alloy, 50mm length, 31.8mm Handlebar Clamp Diameter, 5 degree Rise Grips: Vitus Lock On Wheelset: Nukeproof Horizon V2 Wheelset, 29" Front and Rear, 32H, 6 Bolt, Boost 110mm x 15mm Front & 148mm x 12mm Rear Hub Spacing, Tubeless Ready F/rim: Nukeproof Horizon V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: Nukeproof Horizon V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 110mm x 15mm R/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 148mm x 12mm F/tyre: Maxxis Assegai, 29" x 2.50" WT, 3C MaxxGrip compound, EXO+ casing R/tyre: Maxxis Minion DHR II, 29" x 2.4" WT, 3C MaxxTerra compound, DD casing Chain: Shimano XT M8100, 12 Speed, 116 Links Crankset: Shimano XT M8100, 12 Speed, 32T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell F/brake Set: Shimano XT, Lever: BL-M8100, Caliper: BR-M7120, Post Mount, Four Piston Caliper R/brake Set: Shimano XT, Lever: BL-M8100, Caliper: BR-M7120, Post Mount, Four Piston Caliper Rotors: Shimano RT76 or Brakco DR-02, 203mm Front & Rear, 6 Bolt Hub Fitment R/derailleur: Shimano XT M8100, 12 Speed, Shadow Plus, Long Cage R/shifter: Shimano XT M8100, 12 Speed, Rapidfire Plus Freewheel: Shimano XT M8100, 12 Speed, 10-51T Range Saddle: Nukeproof Horizon Enduro Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L & XL: 170mm drop Seat Screw: Vitus, 36.4mm Diameter Weight: Medium: 15.6kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Escarpe 29 CR features a top-quality T700 carbon fibre front triangle and an ultra-strong aluminium rear, giving you stable and playful performance at a low weight. Equipped with a 12-Speed Shimano Deore groupset, a wide-ranging 10-51 Tooth cassette and hydraulic disc brakes, this trail-warrior climbs the steepest hills and race the fastest descents with ease. It's also equipped with terrain smoothing Marzocchi Bomber Z2 forks and a RockShox Deluxe Select rear shock, and it rolls fast upon Tubeless Ready WTB ST Light i30 wheelset wrapped in high-grip Wide Trail (WT) Maxxis tyres. Dependable and Versatile Full Suspension Trail Bike No two trails are created equal and even your favourite singletrack will ride differently from one week to the next, so when you can’t trust the surface, you need absolute faith in the bike. Enter the Vitus Escarpe 29 CR Mountain Bike. Whether new to riding trails or looking to upgrade your ride, the Escarpe CR has reassuring stability that tames those intimidating obstacles - the off-camber turns, the wet roots and the rocky descents. You want a trail bike that inspires confidence, behaves predictably and leaves you grinning for more, not gritting your teeth. You want a bike that flows with total control and won’t feel like a grind on the climbs, keeping your legs fresh for one more run. You want a trustworthy sidekick out on the trails that keep the fun turned up. This is it. Performance is defined by how a bike responds to hard braking, puts power through the pedals, negotiates technical ground and handles quick changes to body position. The carbon front triangle and aluminium rear of the Escarpe CR ensure a balanced ride feel and complete efficiency. The suspension and frame function as a system, together countering the fatiguing effects of pedal-bob (the irritating bounce that can happen when you're pushing hard) and reducing the harshness of small bumps and trail vibrations that kill speed. Adjustable Flip-Chip Suspension Platform Smoother is faster for longer. With an adjustable flip-chip, that can raise the bottom bracket by 6mm and increase the head angle, you can also customise the setup to best suit how and where you ride. It features geometry and performance that are optimised throughout the size range, so whether you are S or XL, there’s no compromise on how this bike feels. When riding trails there’s enough to think about without having to consider how the bike is going to respond to the next turn or bump. You should just know. It should do what you need it to. No backchat and no fight. On the Escarpe you don’t have to compensate or compromise. You don’t have to adjust your style. Just ride. Just concentrate on having fun. Key Features: T700 carbon front triangle with alloy rear for a balance of efficiency and playful handling Marzocchi Bomber Z2 and Deluxe Select R suspension Shimano Deore 1x12 speed drivetrain Powerful Shimano hydraulic disc or SRAM DB8 hydraulic disc brakes WTB KOM Trail i30 Tubeless Ready rims with tape applied Confidence-inspiring Maxxis Assegai and Dissector tyres Suspension Travel: 150mm Front, 140mm Rear Features: Frame: Escarpe T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle Rear Shock: RockShox Deluxe Select R, 205mm x 60mm, trunnion Fork: Marzocchi Bomber Z2 29", 150mm travel, Rail damper, Float air spring, 34mm stanchions, 110mm x 15mm bolt through axle, 44mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/28.6 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 760mm Wide, L and XL: 780mm Wide Stem: Nukeproof Neutron AM, 6061 Alloy, 45mm length, 31.8mm Handlebar Clamp Diameter, 0° Rise Grip(Tape): Vitus Lock On Wheelset: WTB ST Light i30 rims on Vitus KT hubs, 29", 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready Front Rim: WTB ST Light i30 TCS 2.0, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed Rear Rim: WTB ST Light i30 TCS 2.0, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed Front Hub: Vitus KT DHF112, 32H, 6 Bolt Disc Fitment, 110mm x 15mm Rear Hub: Vitus KT H5ER-SH, 32H, 6 Bolt Disc Fitment, 148mm x 12mm Front Tyre: Maxxis Assegai, 29" x 2.50" WT, 3C MaxxTerra compound, EXO casing Rear Tyre: Maxxis Dissector, 29" x 2.4" WT, 3C MaxxTerra compound, EXO+ casing Spoke: Stainless Steel, Double Butted Chain: Shimano Deore M6100, 12 Speed, 116 Links Crankset: Shimano Deore M6100, 12 Speed, 30T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell F/brake Set: Shimano MT420, Lever: BL-M4100, Caliper: BR-MT420, Post Mount, Four Piston Caliper or SRAM DB8 hydraulic disc brakes R/brake Set: Shimano MT420, Lever: BL-M4100, Caliper: BR-MT420, Post Mount, Four Piston Caliper or SRAM DB8 hydraulic disc brakes Brake Rotors: Shimano RT66 or SRAM CenterLine - Shimano: 203mm Front, SRAM: 200mm Front, 180mm Rear, 6 Bolt Hub Fitment Rear Derailleur: Shimano Deore M6100, 12 Speed, Shadow Plus, Long Cage Right Shifter: Shimano Deore M6100, 12 Speed, Rapidfire Plus Freewheel: Shimano Deore M6100, 12 Speed, 10-51T Range Saddle: Nukeproof Neutron Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 36.4mm Diameter Weight: Medium: 15.1kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
the Sommet 297 AMP features 170mm-travel RockShox suspension front and rear - Zeb Ultimate forks and a Super Deluxe Ultimate rear shock give you outstanding trail-smoothing traction for all-terrain racing. Spurring it onwards is a fast-shifting SRAM XO1 Eagle groupset with a 10-52T cassette and powerful all-weather SRAM Code RSC hydraulic disc brakes. It also rolls upon Tubeless Ready Nukeproof Horizon V2 wheels wrapped in Maxxis tyres and it features a RockShox Reverb Stealth dropper seatpost. Ideal for Enduro, Bike Park and All Mountain Riding When the trees are passing you in a blur and the beams of light and colour transport you to a new place. Is this what warp speed feels like? Float from take-off to landing and rip down descents, from bike park to big mountain and ragged off-piste. The rush as you roll out at the bottom of the trail and chase one last uplift. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. Mixed-Wheel Size for Optimised Speed, Agility and Control The Sommet 297 AMP has been developed to run a manual-loving mullet wheel setup. A 27.5” rear wheel gives you more clearance to hang off the back on steep ground or drops, while a stable 29” wheel at the front eats up rocky terrain and keeps momentum high. Long-Travel RockShox Suspension and SRAM XO1 Eagle Groupset You’re getting the versatility of both wheel sizes in one bike. Keeping the shifting on-point is SRAM’s XO1 Eagle 12-speed drivetrain, paired with powerful SRAM Code RSC disc brakes that should put an end to those cold-sweat moments when you’re coming in just a little too hot. With volume added to the carbon front triangle, stability is rock solid without compromising agility. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. Powerful and Dependable Enduro Race Bike The Sommet is a bike that you sit within, not perch on top. Eagerly shred the refined berms and manicured features of a trail centre but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of naturally technical ground. Whether threading the needle through Enduro tape or dropping in on your favourite descent, speed comes easily to the Sommet AMP. It thrives in the chaos of turbulent trails. Bringing calm where all around there is frenzy. Key Features: Carbon Sommet Enduro Platform: Modern geometry with an adjustable flip-chip, improved suspension kinematics and a smile-inducing ride Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: Enduro Big-hitting enduro bike with modern geometry RockShox Zeb Ultimate and Super Deluxe Ultimate RCT suspension SRAM X01 1x12 speed drivetrain Powerful SRAM Code RSC 4 piston hydraulic disc brakes Nukeproof Horizon V2 Tubeless Ready wheelset with tape applied Confidence-inspiring Maxxis Assegai and Minion DHR II tyres Features: Frame: Sommet T700 Carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru-axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: RockShox Super Deluxe Ultimate RCT, DebonAir, 205mm x 65mm, trunnion Fork: RockShox Zeb Ultimate 29", 170mm travel, Charger 2.1 RC2 damper, DebonAir, 38mm stanchions, 110mm x 15mm Maxle Stealth axle, 44mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8"" upper tapered to 1.5"" lower headtube Handlebar: Nukeproof Horizon V2 Carbon Riser, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 760mm Wide, L: 780mm Wide, XL: 800mm Wide Stem: Nukeproof Horizon, 6061 Alloy, 50mm length, 31.8mm Handlebar Clamp Diameter, 5° Rise Grips: Nukeproof Sam Hill, Enduro Race Super Soft Grips Wheelset: Nukeproof Horizon V2 Wheelset, 29" Front, 27.5" Rear, 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready F/rim: Nukeproof Horizon V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: Nukeproof Horizon V2, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 110mm x 15mm R/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 148mm x 12mm F/tyre: Maxxis Assegai, 29" x 2.50" WT, 3C MaxxGrip compound, EXO+ casing R/tyre: Maxxis Minion DHR II, 27.5" x 2.4", 3C MaxxTerra compound, DD casing Chain: SRAM XO1 Eagle, 12 Speed, 118 Links Crankset: Truvativ Descendant Carbon, Eagle 12 Speed, 30T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: SRAM DUB, BSA Threaded BB, 73mm Shell F/brake Set: SRAM Code RSC, Post Mount, Four Piston Caliper, Sintered Pads R/brake Set: SRAM Code RSC, Post Mount, Four Piston Caliper, Sintered Pads Rotors: SRAM Centreline, 200mm Front and Rear, 6 Bolt Hub Fitment R/derailleur: SRAM XO1 Eagle, 12 Speed, Black R/shifter: SRAM XO1 Eagle, 12 Speed, Black Freewheel: SRAM XO1 Eagle, CS-XG-1295, 12 Speed, 10-52T Range Saddle: Nukeproof Horizon Enduro Saddle, Black, Steel Rails Seat Post: RockShox Reverb Stealth Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L & XL: 175mm drop Seat Screw: Vitus, 36.4mm Diameter Weight: Medium: 15.1kg (tubeless set up) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Rapide FS CRX features a full carbon fibre frame equipped with some of the best components available on the market. It rolls on a premium carbon Reynolds wheelset and has RockShox SID SL Ultimate/ SIDLuxe Select+ to swallow up the rough stuff. Plus, it boasts a Shimano XT/SLX wide-range 12-Speed drivetrain. There’s no shying away from the intensity of cross country (XC) racing and the Vitus Rapide FS CRX mountain bike is well equipped for the challenges set by modern course designers. It's a bike that's ready to take on ever more intimidating features, steeper descents and punchier climbs, as the world of XC continues to push boundaries and demand more from both bike and rider. Whether you are stamping on the pedals from the front of the grid or jostling in the pack, the precise handling and acceleration of the Rapide FS bring poise to the breathless blur of fast racing, from start gun to finish tape. XC is no longer simply cyclocross with the volume turned up. With downhill lines and rock gardens more akin to Enduro and route profiles so toothy that you’ll feel a pang of lactic burn simply looking at the course map, the Rapide FS packages up razor-sharp efficiency and trail-capability in an impressively lightweight full-suspension carbon build. Using the same four-bar suspension as the rest of the Vitus mountain bike range ensures proven control over pedal bob, comfort and consistent performance under braking. Whether charging up climbs or coming in hot to tight corners, the handling is reassuringly predictable. The frame is dressed for racing, be that XC, marathon, 12-hour or an all-out 24-hour challenge, with a Shimano XT/SLX groupset, RockShox SID SL Ultimate fork, SIDLuxe Select+ rear shock and Reynolds 29” carbon wheelset. No weak links here. Buzzing laps on dreamy dusty days or teetering through the slop of mid-winter, XC racing is a love affair. A discipline with high demands and high reward, and the satisfying hum of a good race in the legs that just keeps us coming back for more. Each course offers a unique personality and a different challenge, and yet regardless of the conditions or the obstacles along the trail, the Rapide FS brings unwavering confidence. Key Features: UD Carbon full suspension frame designed for XC/Marathon racing RockShox SID SL Ultimate & SIDLuxe Select+ suspension with remote lockouts High-performance Shimano XT/SLX 12 speed drivetrain Shimano XT hydraulic disc brakes Reynolds TR 309/289 XC carbon wheelset Fast-rolling Maxxis Rekon Race tyres Features: Frame: Rapide FS UD Carbon full suspension frame, Post disc brake mounts, BSA threaded BB, Boost hub spacing – 148x12mm thru axle Fork: RockShox SID SL Ultimate 29”, 100mm travel, remote lockout, DebonAir, Charger Race Day damper, 32mm stanchions, tapered alloy steerer, Boost hub spacing – 110x15mm Maxle Stealth axle, 44mm offset Rear Shock: RockShox SIDLuxe Select+, remote lockout, trunnion mount, DebonAir, 165x40mm Headset: Acros AZX-212-CO R5, IS41.8/28.6 upper & IS52/40 lower Handlebar: Ritchey WCS Flat Bar, 6061 Alloy, 5mm rise, 9° back sweep, S: 720mm wide, M: 740mm, L & XL: 760mm wide Stem: Ritchey WCS C220 84D, Forged 2014 Alloy, Reach - S: 70mm, M:80mm, L:90mm, XL: 100mm, 31.8mm Handlebar Clamp Diameter, +/-6° Rise Grip(Tape): Vitus lock on Front Rim: Reynolds TR 309 XC Carbon, 29", 30mm inner rim width, Presta valve, tubeless ready rim tape installed Rear Rim: Reynolds TR 289 XC Carbon, 29", 28mm inner rim width, Presta valve, tubeless ready rim tape installed Front Hub: Reynolds TR MTN, 6-bolt disc fitment, 110x15mm Rear Hub: Reynolds TR MTN, 3-pawl driver with 10-degree engagement, 6-bolt disc fitment, 148x12mm Front Tyre: Maxxis Rekon Race, 29" x 2.25", EXO casing Rear Tyre: Maxxis Rekon Race, 29" x 2.25", EXO casing Chain: Shimano XT M8100, 12-Speed, 114 links Crankset: Shimano XT M8100, 32T Narrow Wide chainring, S: 170mm crank length M/L/XL: 175mm crank length Bottom Bracket: Shimano BB52, BSA threaded Front Brake Set: Shimano XT M8100, Post Mount, two piston caliper, resin pads Rear Brake Set: Shimano XT M8100, Post Mount, two piston caliper, resin pads Rotors: Shimano RT76 180mm front and rear, 6-bolt hub fitment Rear Derailleur: Shimano SLX M7100, 12-Speed, Shadow Plus, Long Cage Rear Shifter: Shimano XTR M9100, 12 Speed, Rapidfire Plus Cassette: Shimano XT M8100, 12 Speed, 10-51T Range Saddle: WTB SL8 Comp, 142mm wide, Black, CrMo rails Seat Post: Ritchey WCS Zero, 3D forged 7050 alloy, zero offset, 31.6mm x 400mm Seat Screw: Vitus bolt, 34.9mm Weight: Medium: 10.7kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Sommet 297 frame features a carbon/alloy construction and is optimised for enduro racing. It offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks. This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility. So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. Long-Travel Enduro Race Frame for Mixed-Wheel Platform As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial-in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration. The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike. Key Features: Big-hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip-chip to fine-tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areas Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru-axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 36.4mm Diameter Carbon Sommet Enduro Platform: Modern geometry with an adjustable flip-chip, improved suspension kinematics and a smile-inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: Enduro
The Rapide FS CRS features a full carbon fibre frame that is complemented by a top-performing components package that includes RockShox SID SL Select/SIDLuxe Select+ suspension, Shimano SLX 12 speed gears, disc brakes and DT Swiss X 1900 Spline wheels. There’s no shying away from the intensity of cross country (XC) racing and the Vitus Rapide FS CRS mountain bike is well equipped for the challenges set by modern course designers. A bike ready to take on ever more intimidating features, steeper descents and punchier climbs, as the world of XC continues to push boundaries and demand more from both bike and rider. Whether you are stamping on the pedals from the front of the grid or jostling in the pack, the precise handling and acceleration of the Rapide FS bring poise to the breathless blur of fast racing, from start gun to finish tape. XC is no longer simply cyclocross with the volume turned up. With downhill lines and rock gardens more akin to Enduro and route profiles so toothy that you’ll feel a pang of lactic burn simply looking at the course map, the Rapide FS packages up razor-sharp efficiency and trail-capability in an impressively lightweight full-suspension carbon build. Using the same four-bar suspension as the rest of the Vitus mountain bike range ensures proven control over pedal bob, comfort and consistent performance under braking. Whether charging up climbs or coming in hot to tight corners, the handling is reassuringly predictable. The frame is dressed for racing, be that XC, marathon, 12-hour or an all-out 24-hour challenge, with a RockShox SID SL Select fork, SIDLuxe Select rear shock and a DT Swiss 29” wheelset. No weak links here. Buzzing laps on dreamy dusty days or teetering through the slop of mid-winter, XC racing is a love affair. A discipline with high demands and high rewards, and the satisfying hum of a good race in the legs that just keeps us coming back for more. Each course offers a unique personality and a different challenge, and yet regardless of the conditions or the obstacles along the trail, the Rapide FS brings unwavering confidence. Please Note: Due to volatility in the bicycle supply chain we may slightly alter the specification of the component parts supplied with this bicycle. Where this happens we have listed the alternate product in the specification table and have ensured that this is of either equivalent or superior specification to the stock component. Key Features: UD Carbon full suspension frame designed for XC/Marathon racing Rockshox SID SL Select & SIDLuxe Select+ suspension with remote lockouts Reliable Shimano SLX 12 speed drivetrain Shimano Deore hydraulic disc brakes or SRAM DB8 hydraulic disc DT Swiss X 1900 Spline wheelset Fast-rolling Maxxis Rekon Race tyres Features: Frame: Rapide FS UD Carbon full suspension frame, Post disc brake mounts, BSA threaded BB, Boost hub spacing – 148x12mm thru axle Fork: RockShox SID SL Select RL 29”, 100mm travel, Remote Lockout, DebonAir, Charger RL Damper, 32mm stanchions, tapered alloy steerer, Boost hub spacing – 110mm x 15mm Maxle Stealth axle, 44mm Offset Rear Shock: RockShox SIDLuxe Select+, remote lockout, trunnion mount, DebonAir, 165x40mm Headset: Acros AZX-212-CO R5, IS41.8/28.6 upper & IS52/40 lower Handlebar: Vitus 6061 Alloy, 5mm rise, 9° back sweep, S: 720mm wide, M/ L/XL: 740mm wide Stem: Vitus 6061 Alloy, Reach - S: 70mm, M:80mm, L:90mm, XL: 100mm, 31.8mm Handlebar Clamp Diameter, -7° Rise Grip(Tape): Vitus lock on Front Rim: DT Swiss X 1900 Spline, 29", 25mm inner rim width, Presta valve, tubeless ready rim tape installed Rear Rim: DT Swiss X 1900 Spline, 29", 25mm inner rim width, Presta valve, tubeless ready rim tape installed Front Hub: DT Swiss X 1900 Spline, 6-bolt disc fitment, 110x15mm Rear Hub: DT Swiss X 1900 Spline, 6-bolt disc fitment, 148x12mm Front Tyre: Maxxis Rekon Race, 29" x 2.25", EXO casing Rear Tyre: Maxxis Rekon Race, 29" x 2.25", EXO casing Chain: Shimano Deore M6100, 12-Speed, 114 links Crankset: Shimano MT501, 30T Narrow Wide chainring, S: 170mm crank length M/L/XL: 175mm crank length Bottom Bracket: Shimano BB52, BSA threaded Front Brake Set: Shimano Deore M6100, Post Mount, two piston caliper, resin pads or SRAM DB8 hydraulic disc Rear Brake Set: Shimano Deore M6100, Post Mount, two piston caliper, resin pads or SRAM DB8 hydraulic disc Brake Rotors: Shimano RT56 or SRAM CenterLine - 180mm Front & Rear, 6 Bolt Hub Fitment Rear Derailleur: Shimano SLX M7100, 12-Speed, Shadow Plus, Long Cage Rear Shifter: Shimano SLX M7100 Rapidfire plus, 12-Speed Cassette: Shimano Deore M6100, 12-Speed, 10-51T Range Saddle: Vitus, black, Steel rails Seat Post: Vitus 6061 Alloy, 31.6mm Diameter x 400mm Long Seat Screw: Vitus bolt, 34.9mm Weight: Medium: 11.7kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Escarpe 27 CR features 150mm-travel Marzocchi Bomber Z2 suspension forks and a RockShox Deluxe Select rear shock that offers exceptional trail-smoothing stability, traction and all-weather confidence. Armed with a Shimano Deore 1x12-Speed groupset that includes a wide-ranging 10-51 Tooth cassette for climbing steep hills and riding fast anywhere while powerful hydraulic disc brakes ensure you have outstanding stopping power at your fingertips. Rolling fast and stable upon Tubeless Ready WTB ST Light i30 rims laced into reliable Vitus KT hubs and wrapped in Maxxis Wide Trail tyres, this bike is ready for whatever you throw at it. Agile, Powerful and Versatile Full Suspension Trail Bike No two trails are created equal and even your favourite singletrack will ride differently from one week to the next, so when you can’t trust the surface, you need absolute faith in the bike. Enter the Vitus Escarpe 27 CR Mountain Bike. Whether new to riding trails or looking to upgrade your ride, the Escarpe CR has reassuring stability that tames those intimidating obstacles - the off-camber turns, the wet roots and the rocky descents. You want a trail bike that inspires confidence, behaves predictably and leaves you grinning for more, not hanging on for dear life. You want a bike that flows with total control and won’t feel like a grind on the climbs, keeping your legs fresh for one more run. You want a trustworthy sidekick out on the trails that keep the fun turned up. This is it. Adjustable Flip-Chip Suspension Platform Performance is defined by how a bike responds to hard braking, putting power through the pedals, technical ground and quick changes to body position. The carbon front triangle and aluminium rear of the Escarpe CR ensure a balanced ride feel and complete efficiency. The suspension and frame function as a system, together countering the fatiguing effects of pedal-bob (the irritating bounce that can happen when you're pushing hard) and reducing the harshness of small bumps and trail vibrations that kill speed. Smoother is faster for longer. With an adjustable flip-chip, that can raise the bottom bracket by 6mm and increase the head angle, you can also customise the setup to best suit how and where you ride. Adding to this, geometry and performance are optimised throughout the size range, so whether you are S or XL, there’s no compromise on how this bike feels. When riding trails there’s enough to think about without having to consider how the bike is going to respond to the next turn or bump. You should just know. It should do what you need it to. No backchat and no fight. On the Escarpe you don’t have to compensate or compromise. You don’t have to adjust your style. Just ride. Just concentrate on having fun. Key Features: Marzocchi Bomber Z2 27.5” 150mm fork with 140mm RockShox Deluxe Select R shock WTB ST Light i30 27.5” wheels and a Maxxis Assegai (front) with Dissector (rear) tubeless ready tyres Robust Shimano 1x12 wide range M6100 Deore drivetrain with Shimano MT420 disc brakes or or SRAM DB8 hydraulic disc brakes T700 Carbon front triangle paired with 6061-T6 aluminium rear for compliance and stiffness Robust frame protection on downtube and seatstay, plus soft rubber on the chainstay deliver exceptional frame protection whilst reducing noise from chain slap Internal cable routing Improved seat post insertion allows for a longer Brand X Ascend dropper post so that body position is always comfortable and efficient Suspension Travel: 150mm Front, 140mm Rear Features: Frame: Escarpe T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle Rear Shock: RockShox Deluxe Select R, 205mm x 60mm, trunnion Fork: Marzocchi Bomber Z2 27.5", 150mm travel, Rail damper, Float air spring, 34mm stanchions, 110mm x 15mm bolt through axle, 44mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper & ZS56/28.6 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S & M: 760mm Wide, L & XL: 780mm Wide Stem: Nukeproof Neutron AM, 6061 Alloy, 45mm length, 31.8mm Handlebar Clamp Diameter, 0° Rise Grip(Tape): Vitus Lock On Wheelset: WTB ST Light i30 rims on Vitus KT hubs, 27.5", 32H, 6 Bolt, Boost 110mm x 15mm Front & 148mm x 12mm Rear Hub Spacing, Tubeless Ready Front Rim: WTB ST Light i30 TCS 2.0, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed Rear Rim: WTB ST Light i30 TCS 2.0, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed Front Hub: Vitus KT DHF112, 32H, 6 Bolt Disc Fitment, 110mm x 15mm Rear Hub: Vitus KT H5ER-SH, 32H, 6 Bolt Disc Fitment, 148mm x 12mm Front Tyre: Maxxis Assegai, 27.5" x 2.50" WT, 3C MaxxTerra compound, EXO casing Rear Tyre: Maxxis Dissector, 27.5" x 2.4" WT, 3C MaxxTerra compound, EXO+ casing Spoke: Stainless Steel, Double Butted Chain: Shimano Deore M6100, 12 Speed, 116 Links Crankset: Shimano Deore M6100, 12 Speed, 32T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell F/brake Set: Shimano MT420, Lever: BL-M4100, Caliper: BR-MT420, Post Mount, Four Piston Caliper or SRAM DB8 hydraulic disc R/brake Set: Shimano MT420, Lever: BL-M4100, Caliper: BR-MT420, Post Mount, Four Piston Caliper or SRAM DB8 hydraulic disc Brake Rotors: Shimano RT66 or SRAM CenterLine - Shimano: 203mm Front, SRAM: 200mm Front, 180mm Rear, 6 Bolt Hub Fitment Rear Derailleur: Shimano Deore M6100, 12 Speed, Shadow Plus, Long Cage Right Shifter: Shimano Deore M6100, 12 Speed, Rapidfire Plus Freewheel: Shimano Deore M6100, 12 Speed, 10-51T Range Saddle: Nukeproof Neutron Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L & XL: 170mm drop Seat Screw: Vitus, 34.9mm Diameter Weight: Medium: 14.8kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Sommet 29 CRS features a strong and lightweight modern-geometry enduro frame that's equipped with 170mm-travel RockShox Zeb forks and a Super Deluxe Select+ rear shock - this gives a superb balance of pace, agility, traction and control for all-riding conditions. A fast-shifting Shimano SLX 1x12-Speed groupset offers a wide gear range for climbing steep hills and racing down fast descents, and you have powerful 4-Pot Shimano SLX hydraulic disc brakes to control your momentum when needed. It also rolls upon Tubeless Ready Nukeproof Neutron V2 wheels wrapped in high-grip Maxxis Assegai and Minion DHR II Wide Trail (WT) tyres. Balanced, Fast and Stylish Enduro Race Bike The Vitus Sommet CRS 29 Mountain Bike delivers the rush. The rush of air, the rush of trees passing you in a blur, the rush of tyres through dirt, the rush of light, the rush of sounds - the brief snapshots that flood your senses and place you deep in the zone. And then there’s the rush that boils up inside you and the feeling of total control as you float from take-off to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last uplift. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. Agile, Dependable and Powerful Full-Suspension Mountain Bike The Sommet is a bike that you sit within, not perch on top. It’s a powerful rider position and together you are a team. Eagerly shred the refined berms and manicured obstacles of a trail centre but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of natural features and steep, technical ground. With volume added to the carbon front triangle, stability is rock solid without compromising agility. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. Whether threading the needle through Enduro tape or dropping into your favourite descent, speed comes easily to the Sommet. It thrives in the chaos of steep and turbulent trails. Bringing calm where all around there is frenzy. Key Features: Big-hitting enduro bike with modern geometry RockShox Zeb Select and Super Deluxe Select+ RT suspension Shimano SLX 1x12 speed drivetrain Powerful Shimano SLX 4 piston hydraulic disc brakes Nukeproof Neutron V2 tubeless-ready wheelset with tape applied Confidence-inspiring Maxxis Assegai and Minion DHR II tyres Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile-inducing ride Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear Wheel Size: 29" Suspension Travel (MTB Only): 170mm Front, 162mm Rear Intended Use: Enduro Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru-axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: RockShox Super Deluxe Select+ RT, DebonAir, 205mm x 62.5mm, trunnion Fork: RockShox Zeb Select 29", 170mm travel, Charger RC damper, DebonAir, 38mm stanchions, 110mm x 15mm Maxle Stealth axle, 44mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 780mm Wide, L and XL: 800mm Wide Stem: Nukeproof Neutron AM, 6061 Alloy, 45mm length, 31.8mm Handlebar Clamp Diameter, 0° Rise Grips: Vitus Lock On Wheelset: Nukeproof Neutron V2 Wheelset, 29" Front and Rear, 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready F/rim: Nukeproof Neutron V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: Nukeproof Neutron V2, 29", 32H, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Nukeproof Neutron V2, 32H, 6 Bolt Disc Fitment, 110mm x 15mm R/hub: Nukeproof Neutron V2, 32H, 6 Bolt Disc Fitment, 148mm x 12mm F/tyre: Maxxis Assegai, 29" x 2.50" WT, 3C MaxxGrip compound, EXO+ casing R/tyre: Maxxis Minion DHR II, 29" x 2.4" WT, 3C MaxxTerra compound, DD casing Chain: Shimano SLX M7100, 12 Speed, 116 Links Crankset: Shimano SLX M7100, 12 Speed, 32T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell F/brake Set: Shimano SLX, Lever: BL-M7100, Caliper: BR-M7120, Post Mount, Four Piston Caliper R/brake Set: Shimano SLX, Lever: BL-M7100, Caliper: BR-M7120, Post Mount, Four Piston Caliper Rotors: Shimano RT66, 203mm Front and Rear, 6 Bolt Hub Fitment R/derailleur: Shimano SLX M7100, 12 Speed, Shadow Plus, Long Cage R/shifter: Shimano SLX M7100, 12 Speed, Rapidfire Plus Freewheel: Shimano SLX M7100, 12 Speed, 10-51T Range Saddle: Nukeproof Horizon Enduro Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 36.4mm Diameter Weight: Medium: 15.4kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Dominer Downhill (DH) features an ultra-durable alloy frame that offers exceptional agility, stability and control whether you’re on the trail or in the air. Vitus has equipped it with long travel RockShox Boxxer forks and a Super Deluxe Coil rear shock, this suspension combo soaks up the biggest hits from the trail, controls the heaviest landings and offers exceptional traction across the most demanding terrain conditions. Fitted with a SRAM GX DH 7-Speed groupset with Truvativ Descendant DH cranks and SRAM Guide RE hydraulic disc brakes, this bike gets up to speed quickly and ensures you have outstanding stopping power at your fingertips. It also rolls upon Tubeless Ready Nukeproof Horizon V2 wheels wrapped in Tubeless Ready Maxxis Assegai and Minion DHR II tyres. Everything about the Vitus Dominer is dialled for aggressive downhill riding, extreme features and racing. For the big days when you need your game-head on. When tree trunks line the route like stormtroopers and steep, intimidating lines funnel you in. Strong, Agile and Versatile Downhill Race Bike No return. Breathe. Relax. Total commitment. Downhill is a state of mind. Time slows and the kinematics of your bike and body are in perfect harmony, absorbing the hits and flowing like mercury. Analysing each root, rock or ripple on the trail ahead like a super-computer. No time to think about the close calls because the next obstacle is coming at you fast. RockShox Suspension and SRAM DH 7-Speed Groupset The Dominer is equipped with performance components ready to shrug off the biggest hits. RockShox handles the suspension duties with the Boxxer Select equipped with Charger RC damper, paired with a Super Deluxe Coil rear shock for a buttery smooth ride. Super powerful SRAM Guide RE brakes keep you in control when things get rowdy with 200mm rotors front and rear. The SRAM GX DH 7 speed drivetrain provides quick, reliable shifting when you need it most. Rolling on Nukeproof's Horizon V2 wheelset that purrs down the trail with 102 points of engagement for instant acceleration when you need to put the power down, the all-powerful Dominer can tame the descent, enabling you to ride new and old trails with less sketch and more style. Key Features: Built to handle the rowdiest terrain at high speed RockShox Boxxer Select and Super Deluxe R Coil suspension Reliable SRAM GX DH 7 speed drivetrain SRAM Guide RE brakes with big 200mm rotors to keep you in control Confidence-inspiring Maxxis Assegai and Minion DHR II tyres Steezy Nukeproof finishing kit Ultimate Race Ready Downhill Bike Patented Four-Bar V-Link rear suspension set-up with floating shock mount Frame Material: 6061-T6 Aluminium Wheel Size: 27.5" Suspension Travel (MTB Only): 200mm Front and Rear Intended Use: Downhill Features: Frame: Dominer Alloy 6061-T6, Triple butted, 200mm travel, 4-bar V-Link suspension with floating shock mount, Horst-Link pivot system, ISCG05 chain guide mounts, 150mm x 12mm hub spacing, Axle Specifications: Rear Shock: RockShox Super Deluxe Select R Coil, Trunnion mount, 225mm x 72.5mm Fork: RockShox BoXXer Select, 200mm travel, Charger RC damper, DebonAir air spring, 35mm stanchions, 110mm x 20mm Maxle Stealth axle Headset: FSA No: 57-1, 1-1/8" upper tapered to 1.5" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 780mm Wide, L and XL: 800mm Wide Stem: Nukeproof Electron DH, 6061 Alloy, Direct Mount, 47mm - 52mm Adjustable Length, 31.8mm Handlebar Clamp Diameter, 30° Rise Grips: Vitus Lock On Wheelset: Nukeproof Horizon V2 Wheelset, 27.5", 32H, 6 Bolt, Boost 110mm x 20mm Front, 150mm x 12mm Rear Hub Spacing, Tubeless Ready F/rim: Nukeproof Horizon V2, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed R/rim: Nukeproof Horizon V2, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed F/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 110mm x 20mm R/hub: Nukeproof Horizon V2, 32H, 6 Bolt Disc Fitment, 150mm x 12mm F/tyre: Maxxis Assegai, 27.5" x 2.50", 3C MaxxGrip compound, DH casing R/tyre: Maxxis Minion DHR II, 27.5" x 2.4", 3C MaxxGrip compound, DH casing Chain: SRAM PC1110, 11 Speed, 110 Links Crankset: Truvativ Descendant DH, 34T Narrow Wide Chainring, 165mm Crank Length Bottom Bracket: SRAM DUB, BSA Threaded BB, 83mm Shell F/brake Set: SRAM Guide RE, Post Mount, Four Piston Caliper R/brake Set: SRAM Guide RE, Post Mount, Four Piston Caliper Rotors: SRAM Centreline, 200mm Front and Rear, 6 Bolt Hub Fitment R/derailleur: SRAM GX DH, 7 Speed, Medium Cage, Black R/shifter: SRAM GX DH, 7 Speed, Black Freewheel: SRAM PG720 DH, 7 Speed, 11-25T Range Saddle: Nukeproof Vector DH Saddle, Black, Cro-Mo Rails Seat Post: Nukeproof Horizon Inline, 30.9mm x 300mm Seat Screw: Vitus, 34.9mm Diameter Weight: Medium: 16.1kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Escarpe 27 CRS features a carbon frame, 150mm-travel RockShox Lyrik suspension forks and a RockShox Deluxe Select+ rear shock. Vitus has also equipped it with a Shimano SLX M7100 12-Speed groupset that includes a wide-ranging 10-51T cassette and powerful hydraulic disc brakes. Nukeproof Neutron V2 wheels roll with superb pace and stability across all terrains and high-grip Maxxis Wide Trail (WT) MaxxTerra compound tyres grip the earth in all weather conditions. Finally, it's fitted with a Brand-X Ascend dropper seatpost and a high-quality Nukeproof finishing kit. Strong and Lightweight Full-Carbon Trail Bike Whether lapping your favourite trail centre loops or finding your way on unmarked tracks, the Vitus Escarpe 27 CRS Mountain Bike brings reassuring control and trust that will inspire confidence no matter where your front wheel points. It loves kicking up dust on fast summer rides and when you reach the edge of that wet, rooted descent or techy rock garden, the sections that can make you doubt, it’s the voice that says, “You’ve got this!” You want a full-carbon trail bike that feels planted and finds the effortless flow that keeps you grinning for more, not gritting your teeth. You want a bike that brings traction and holds speed on the climbs, keeping your legs fresh for one more run. This is it. Dependable, Versatile and Fun All Mountain Bike Whether braking hard, pushing more power or negotiating a twisty descent, your centre of gravity is rarely constant, so key to the whole system is efficiency. To deal with the dynamic nature of trail riding, the Escarpe stays predictable and consistent so that you can stay loose. No white knuckles here. The suspension kinematics have been enhanced compared to the previous platform, further countering the effects of pedal-bob and reducing the harshness of small bumps and trail vibrations that drain your energy and kill speed. Smoother is faster for longer. With an adjustable flip-chip, that can raise the bottom bracket by 6mm and increase the head angle, you can also customise the setup to best suit how and where you ride. This bike features geometry and performance that are optimised throughout the size range, so whether you are S or XL, there’s no compromise on how this bike feels. When riding trails there’s enough to think about without having to consider how the bike is going to respond to the next turn or obstacle. You should just know. It should do what you need it to. No backchat and no fight. On the Escarpe you don’t have to compensate or compromise. You don’t have to adjust your style. Just ride. Just concentrate on having fun. Key Features: Full T800 frame sheds weight for a truly responsive ride RockShox Lyrik Select and Deluxe Select+ RT suspension Shimano SLX 1x12 speed drivetrain Powerful Shimano SLX hydraulic disc brakes Nukeproof Neutron V2 Tubeless Ready wheelset with tape applied Confidence-inspiring Maxxis Assegai and Dissector tyres Suspension Travel: 150mm Front, 140mm Rear Features: Frame: Escarpe full T800 carbon front and rear triangles, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle Rear Shock: RockShox Deluxe Select+ RT, 205mm x 60mm, trunnion Fork: RockShox Lyrik Select 27.5"", 150mm travel, Charger RC damper, DebonAir, 35mm stanchions, 110mm x 15mm Maxle Stealth axle, 37mm offset Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/28.6 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Handlebar: Nukeproof Horizon V2 Riser, 7075 Alloy, 25mm Rise, 9° Back Sweep, 31.8mm Clamp Diameter, S and M: 760mm Wide, L and XL: 780mm Wide Stem: Nukeproof Neutron AM, 6061 Alloy, 45mm length, 31.8mm Handlebar Clamp Diameter, 0° Rise Grip(Tape): Vitus Lock On Wheelset: Nukeproof Neutron V2 Wheelset, 27.5", 32H, 6 Bolt, Boost 110mm x 15mm Front and 148mm x 12mm Rear Hub Spacing, Tubeless Ready Front Rim: Nukeproof Neutron V2, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed Rear Rim: Nukeproof Neutron V2, 27.5", 32H, Presta Valve, Tubeless Ready Rim Tape Installed Front Hub: Nukeproof Neutron V2, 32H, 6 Bolt Disc Fitment, 110mm x 15mm Rear Hub: Nukeproof Neutron V2, 32H, 6 Bolt Disc Fitment, 148mm x 12mm Front Tyre: Maxxis Assegai, 27.5" x 2.50" WT, 3C MaxxTerra compound, EXO casing Rear Tyre: Maxxis Dissector, 27.5" x 2.4" WT, 3C MaxxTerra compound, EXO+ casing Spoke: Stainless Steel, Double Butted Chain: Shimano SLX M7100, 12 Speed, 116 Links Crankset: Shimano SLX M7100, 12 Speed, 32T Narrow Wide Chainring, 170mm Crank Length Bottom Bracket: Shimano BB52, BSA Threaded BB, 73mm Shell F/brake Set: Shimano SLX M7120, Lever: BL-M7100, Caliper: BR-M7120, Post Mount, Four Piston Caliper R/brake Set: Shimano SLX M7100, Lever: BL-M7100, Caliper: BR-M7100, Post Mount, Two Piston Caliper Rotors: Shimano RT66, 203mm Front, 180mm Rear, 6 Bolt Hub Fitment Rear Derailleur: Shimano SLX M7100, 12 Speed, Shadow Plus, Long Cage Right Shifter: Shimano SLX M7100, 12 Speed, Rapidfire Plus Freewheel: Shimano SLX M7100, 12 Speed, 10-51T Range Saddle: Nukeproof Neutron Saddle, Black, Steel Rails Seat Post: Brand-X Ascend Dropper, Remote lever, 31.6mm Diameter, S: 125mm drop, M: 150mm drop, L and XL: 170mm drop Seat Screw: Vitus, 36.4mm Diameter Weight: Medium: 13.8kg (tubeless setup) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Escarpe 29 CRX frame features top-quality T800 carbon fibre front and rear triangles and it is equipped with a Fox Float DPS Factory Series Kashima coated rear shock. Ready to be the backbone of your stylish hardcore all-mountain trail bike, this frame offers outstanding responsiveness, agility, strength and control at a low weight. It also features Vitus' flip-chip adjustable suspension system that enables you to easily fine-tune its suspension performance to suit your riding style. Agile, Efficient and Stable Full Suspension Trail Frame At the core of the Vitus all-mountain and trail range is the Escarpe CRX Mountain Bike Frame. Bringing forward all that was loved from the previous Escarpe platforms, this latest version has undergone the most comprehensive development yet to deliver a ride experience that’s more controlled, efficient, predictable and stable, whatever the terrain. Climb ahead? No problem. Technical descent inbound? You’ve got this. This performance full-carbon frameset is the perfect starting point to build your dream trail and all-mountain bike. To ride faster, to discover that perfect line, to flow effortlessly where before you tiptoed, your bike and body need to speak the same language. Thankfully the Escarpe knows exactly how to read you and the trail. For Trail and All Mountain Riding Whether braking hard, pushing more power or negotiating a twisty descent, your centre of gravity is rarely constant, so key to the whole system is efficiency. To deal with the dynamic nature of trail riding, the Escarpe stays predictable and consistent so that you can stay loose. No white knuckles here. The suspension kinematics have been enhanced compared to the previous platform, further countering the effects of pedal-bob and reducing the harshness of small bumps and trail vibrations that drain your energy and kill speed. Smoother is faster for longer. With an adjustable flip-chip, that can raise the bottom bracket by 6mm and increase the head angle, you can also customise the setup to best suit how and where you ride. Additionally, geometry and performance are optimised throughout the size range, so whether you are S or XL, there’s no compromise on how this bike feels. Key Features: Full T800 frame sheds weight for a truly responsive ride 29" platform balancing speed and efficiency Adjustable flip-chip to fine-tune handling and your preferred feel Modern geometry with adjustable flip-chip, improved suspension kinematics and a smile-inducing ride. Ultra-Smooth Fox Float DPS Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areas Features: Frame: Escarpe full T800 carbon front and rear triangles, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle Rear Shock: Fox Float DPS Factory Series, Kashima coating, Grip2 air spring, EVOL, 3 position lever, 205mm x 60mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8"" upper tapered to 1.5"" lower headtube Seat Screw: Vitus, 36.4mm Diameter Wheel Size: 29" Weight: Medium: 3.1kg Suspension Travel: 150mm Front, 140mm Rear Intended Use: Trail / All Mountain