The Park Tool LRT-2 is designed and built to remove and install the lockring that retains front chainrings found on Shimano STEPS e-bike motors.Fits Shimano STEPS E6100, E7000, E8000 and E9000 e-bike motor systemsFor lockrings with 54mm outside diameter and 16 notchesReplacement for Shimano TL-FC39 tool36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torqueConstructed of 4140 heat treated steel and plated for long life
The new Shimano EC300 charging connector is designed specifically for Shimano's 12-speed Di2 road drivetrains. Connected via the rear derailleur, it is also compatible with Shimano power meters. Charging of the new Shimano 12-speed Di2 road drivetrains is now accomplished with the EC300 charger cord. Attached to the rear derailleur, this new cord is less expensive than previous chargers and can also be used to charge Shimano power meters.Di2 charger cable for the internal battery that will keep your Di2 system shiftingDi2 uses a powerful long-life 7.4V Li-Ion battery: keep it in top condition and ready for shifting with this specific Shimano Di2 charger1.5 hour charge timePlugs in directly to RDR9250 rear derailleur
Please Note: Not compatible with bikes fitted with the Shimano E8000 motor.
This E-bike chain guide for Shimano Steps features a backplate that's made from a lightweight alloy and it's available in six different colour options to complement your ride. Coming equipped with a durable nylon top guide with a co-moulded rubber inset, this model also offers a reduction in noise from your chain. Its top guide has also been extended to provide you with extra protection from your chain/chainring compared to the normal ISCG version. One final highlight is it's easy to install on most bikes without having to remove your cranks. The guide is supplied with various washers allowing you to fine-tune it to suit your chain line.
Plus, it's made from heat-treated steel for maximum strength and reliability. Compatability is only confirmed for offical Shimano components. The tool may not work when alternative brand chainring spiders are installed.
Specifically designed for use with E-bike drivetrains, this right crank arm features a hard-wearing hollow aluminium construction. This makes it perfect at handling all the abuse that comes with all-day epics in the mountains. Shimano has also equipped this model with an anodised finish, which gives it additional protection against corrosion and the elements. Another benefit of its hollow-forged construction is it overs a superior strength to weight ratio, so you can benefit from its exceptional durability without adding any unnecessary grams to your E-bike. Technologies: Hollowtech: Hollow forged crank arms. A lightweight crankset not only reduces the bike’s weight, but decreases rotating mass to aid in acceleration. The challenge is to reduce the weight of the crank without reducing its strength and rigidity. SHIMANO’s advanced forging technology has solved the problem through the HOLLOWTECH crank. Just like high-quality frame tubing, a hollow crank arm can provide amazing strength and rigidity at very lightweight.
Shimano's SM-DUE70-B drive unit cover offers a clean and simple E-bike look with the mount bolt exposed for Shimano STEPs E7000 E-bike drive systems.
Specifically designed for use with E-bike drivetrains with Deore XT compatibility, this right crank arm features a hard-wearing hollow aluminium construction. This makes it perfect at handling all the abuse that comes with all-day epics in the mountains. Shimano has also equipped this model with an anodised finish, which gives it additional protection against corrosion and the elements. Another benefit of its hollow-forged construction is it overs a superior strength to weight ratio, so you can benefit from its exceptional durability without adding any unnecessary grams to your E-bike. Technologies: Hollowtech: Hollow forged crank arms. A lightweight crankset not only reduces the bike’s weight, but decreases rotating mass to aid in acceleration. The challenge is to reduce the weight of the crank without reducing its strength and rigidity. SHIMANO’s advanced forging technology has solved the problem through the HOLLOWTECH crank. Just like high-quality frame tubing, a hollow crank arm can provide amazing strength and rigidity at very lightweight.
This cover is the ideal crash replacement for your electric motor if you’re unlucky enough to crash or come off your STePS E6100-equipped E-Bike.
This cover is the ideal crash replacement for your electric motor if you’re unlucky enough to crash or come off your STePS DUE50-equipped E-Bike.
Specifically designed for use with E-bike drivetrains with Deore XT compatibility, this left crank arm features a hard-wearing hollow aluminium construction. This makes it perfect at handling all the abuse that comes with all-day epics in the mountains. Shimano has also equipped this model with an anodised finish, which gives it additional protection against corrosion and the elements. Another benefit of its hollow-forged construction is it overs a superior strength to weight ratio, so you can benefit from its exceptional durability without adding any unnecessary grams to your E-bike. Technologies: Hollowtech: Hollow forged crank arms. A lightweight crankset not only reduces the bike’s weight, but decreases rotating mass to aid in acceleration. The challenge is to reduce the weight of the crank without reducing its strength and rigidity. SHIMANO’s advanced forging technology has solved the problem through the HOLLOWTECH crank. Just like high-quality frame tubing, a hollow crank arm can provide amazing strength and rigidity at very lightweight.
Mounting to your bike via the centre of your handlebars, this compact display allows you to view all the essential features of the Shimano STEPS system. The capacity of your battery is displayed as well as the remaining range, speeds and distance. For wheels with the Di2 the selected gear is also displayed. Features: Trip Distance, Total Distance, Current Speed, Average Speed, Max. Speed, Time, Battery Capacity, Reach, Current Gear and Start-mode Gear (only with bikes with Shimano Di2 support and Nexus or Alfine internal gear hub) Technologies: E-Tube: The E-TUBE platform's “Plug & play” and D-FLY wireless connections make it easier than ever to check the system's status, and apply customized settings to DI2 and SHIMANO STEPS components with a PC, tablet or smart phone. Wirelessly customize functions like SHIMANO SYNCHRONIZED SHIFT over Bluetooth® while out on a ride. Automatically checks for firmware updates on each startup to ensure all components are running the latest version. PC, smartphone and tablet applications can help you quickly diagnose errors and simplify the repair process. Beautiful visualization of your real-time SHIMANO STEPS riding data on your smartphone. Advanced all-weather design resists rusting, stretching, and freezing.