Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Top Cap is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Top Cap is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Only compatible with Burgtec Top Cap Bolt.
Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Top Cap is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Top Cap is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Only compatible with Burgtec Top Cap Bolt.
Designed to be used with our Element & 3D reusable face coverings. This 5-layer filter adds additional protection to our face covering Non-woven inner and outer layers prevent larger dust particles from passing through and provide structure and support for the finer filtration layers Polypropylene melt-blown layers prevent smaller particles from passing through the filter down to a size of approximately 3 microns The activated carbon is a highly microporous filtration layer which absorbs smaller gaseous impurities via chemical adsorption Filter should be replaced after 12 hours of use Pack of 10 filter inserts
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturer's entry level bearing.These standard ABEC 3/5 bearings are designed for use within bottom brackets or hubs and give outstanding performance and longevity to your components.
Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Top Cap is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Top Cap is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Only compatible with Burgtec Top Cap Bolt.
Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Top Cap is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Top Cap is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Only compatible with Burgtec Top Cap Bolt.
Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Top Cap is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Top Cap is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Only compatible with Burgtec Top Cap Bolt.
Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Top Cap is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Top Cap is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Only compatible with Burgtec Top Cap Bolt.
Clip-on mudguard for MTX Beam Racks.Durable injection moulded engineering-grade plastic construction,61.5g.
Fabric Silicone Slip on Grips This ergonomic slip-on grip is discreetly ovalised for high comfort, with durable rubberised bar ends to stop scuffs. As it is made from 100% naturally grippy, medical-grade silicone, this grip is designed to keep you in control. Features: Pure siliconeOvalised coreSlip-on designDurable and toughSpecifications: Diameter: 32mmLength: 135mmWeight: 104g pairBuy Fabric Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
CatEye Fizik Saddlerail Rear Light Bracket SR-2 ( 2Pcs ) CATEYE SR-2 SADDLE RAIL REAR LIGHT BRACKET FOR FIZIK ICS COMPATIBLE SADDLES
The Park Tool HR8C is a long-handled L-shaped wrench for installing and removing crank bolts with an 8mm socket. Made from industrial quality high torque steel and through hardened for long life. Speed Bearing attachment for quick installation and removal of long threaded bolts.
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturer's entry level bearing.These standard ABEC 3/5 bearings are designed for use within bottom brackets or hubs and give outstanding performance and longevity to your components.
Excellence evolved the Fly now features a refined compound with more spring aiding cage retention and avoiding compression from changes of air pressure during high mountain descents. The Fly was born directly out of years of feedback from the world's fastest riders and the desire to create the ultimate lightweight racing bidon..By bringing new materials to bidon construction and pushing mold technology to its very limits Elite have created the lightest ever bidon half the weight of the all conquering Corsa or SuperCorsa Wall thickness has been pared down to the absolute minimum whilst maintaining integrity Stripped down 2-piece cap is light and super-fast to remove with the opening designed to easily take powder scoops Simplified 1-piece valve can be removed for cleaning but retention is now much stiffer to avoid unwanted removal This is a dedicated racing bidon for daily use please see our heavier duty models such as the Ombra or Corsa Available in a wide range of colours and in both 550 and 750 ml versions 100% BPA Free
HIGH5 Energy Gel (6 x 40g)The HIGH5 Energy Gel, is a light and refreshing energy gel, made with real fruit juices, that are easy to consume while on the move. Each gel gives you the boost that you need, each gel contains 23g of carbohydrate energy which makes it great for before and after intense exercise.Directions for UseTear the top of the sachet and drink the gel directly from the sachet. Take up to three sachets per hour during exercise, less if you are also using a sports drink.Nutritional Information BerryOrangePer 100gPer 40g ServingPer 100gPer 40g ServingEnergy (kJ/Kcal)969/228388/91969/228388/91Fat (g)0000of which Saturates (g)0000Carbohydrate (g)57235723of which Sugars (g)7.437.43Protein (g)0000Salt (g)0.120.050.120.05IngredientsBerry: Glucose Syrup, Water, Maltodextrin, Fruit Juice Concentrate (Cranberry 1%, Raspberry 1%), Acidity Regulators (Sodium Citrates, Citric Acid), Sodium Chloride, Preservatives (Potassium Sorbate, Sodium Benzoate), Natural Flavourings.Orange: Glucose Syrup, Water, Maltodextrin, Fruit Juice Concentrate (Orange 2%, Lemon, Blood Orange), Acidity Regulators (Sodium Citrates, Citric Acid), Sodium Chloride, Preservatives (Potassium Sorbate, Sodium Benzoate), Natural Flavouring.Allergen Information: For allergen information see ingredients in bold.Features23g of carbohydrate energy per gelCaffeine freeReal fruit juice for a light refreshing tasteLight consistencyEasy to consume on the goDesigned to be taken before and during exerciseSuitable for vegetarians and vegansBuy HIGH5 Endurance from Chain Reaction Cycles, the World's Largest Online Bike Store.
Original Campagnolo Ultra-Shift outer brake casing, 1250mm in length.
Whether you've lost a valve cap or just want to bling your existing pair of Peaty's valves, this kit gives you everything you need. Compatible with all Peaty's Tubeless Valves. Includes: 1x spoke key cap (for 3.4mm spoke nipple), 1x valve core remover cap & 2x lock rings.
A new biodegradable model made in food-grade squeezable polyethylene. This year Elite welcomes a new special bottle model in its cycling range the Jet made in biodegradable plastic material. Available in three sizes so it adapts to any of your hydration needs on your bicycle (550 750 and 950 ml) the Jet combines the best in quality and performance of the most appreciated Elite bottles such as lightness copious liquid flow and tasteless nozzle all the while integrating the use of biodegradable plastic material to lessen the environmental impact of the bottle. The BIO alternative for your hydration Creating more sustainable alternatives for products such as sports bottles which are already an eco-friendly approach compared to the classic one-time use bottle has become an ever-more pressing requirement due to the raised awareness on the use of plastics and its consequences on the environment.The Jet bottle meets these requirements as it reduces the time it takes for the bottle to break down once it enters the regular industrial composting cycles thus becoming one of the most innovative alternatives to traditional non-biodegradable plastic bottles. The plastic material used to create the Jet is treated with a special bio additive that makes the microorganisms responsible for the biodegradation of materials attack the polymeric chain of the plastic. This process significantly reduces the time it takes for the bottle to break down (3 months to 5 years). This is something that regular plastic products cannot do (they usually take 100 to 1000 years to decompose). A new sophisticated design The bottle has a new sporty sophisticated and practical design that made it possible for us to achieve greater resistance for the bottle body while retaining unaltered its lightness and softness. Distinguished by an elegant and sinuous profile the Jet comes with a contoured bottle body with smaller diameter for easier and improved handling insertion and removal of the water bottle under any circumstance.The standard 74 mm diameter of the Jet (66mm for the 350ml version) ensures it can be used with all the commercially available bottlecages. A quick and abundant flow The Jet bottle includes the Elite custom cap with the innovative push-pull nozzle which doesn't just make it easier to open and close it when you're riding your bike it is also designed to supply a quicker and more abundant liquid flow at any time.The opening quick to unscrew makes it easier to wash and dry out the bottle. Safe and odorless As with all Elite bottles the Jet is also made with certified BPA-Free (Bisphenol-A) plastic materials totally safe and compliant with all the more restrictive EC and FDA regulations concerning products that come into contact with foodstuffs. The rubber nozzle of the bottle boasts an innovative odorless and tasteless material designed to effectively maintain the taste of the liquid unaltered. Push-pull valve Reduce plastic life cycle Dishwasher safe up to 75°C With graduated scale
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturer's entry level bearing.These standard ABEC 3/5 bearings are designed for use within bottom brackets or hubs and give outstanding performance and longevity to your components.
Young swimmers will stand out in the pool for all the right reasons in the bright pink Speedo Girl's Plastisol Placement Muscleback One-Piece Swimsuit with a contrasting vibrant hexagon print. This sporty Muscleback is a Speedo favourite, featuring thick straps, positioned to free up the shoulder blades, ensuring a comfortable fit. A medium-cut leg offers just the right amount of coverage, ideal for regular swim sessions. Soft and stretchy, Endurance10 fabric will ensure kids can swim in comfort, whilst Creora HighClo means their suit will fit them like new for longer.