When you’ve got to finish your bike off right. The Burgtec Carbon Stem Spacers are the perfect finishing kit for every carbon lover. Match these with the Ride Wide Carbon bars for the ultimate carbon cockpit. Comes with 2 x 5mm 1 x 10mm 1 x 20mm
The Burgtec Direct Mount MK3 Stem has been pointing some of the world s very best riders downhill for a long time now. Used by the likes of the Santa Cruz Syndicate Team, the Burgtec Direct Mount MK3 Stem has chalked up an impressive number of world cup podium finishes over the last five years, and has been on top of the world championship two years on the bounce. Designed to handle the demands of World Cup spec race bikes, you can rest assured that the Direct Mount MK3 Stem will handle anything you could possible throw at in, a worthy addition to any bike. Fully CNC machined construction and super stiff 35mm or 31.8mm clamp diameterComes with steel bolt hardware as standardDesigned to cope with the demands of World Cup race spec bikesWeight from 130gFits Rockshox Boxxers, Fox 40, DVO, Manitou, Marzocchi and any other forks that use IS stem mounts
The Burgtec Direct Mount Stem Spacer Bolts are only for use in conjunction with the Burgtec Direct Mount Stem Spacer. The bolts are used to securely fasten the stem to the fork when using the Direct Mount Stem Spacers.30mm bolts for use with one Burgtec Direct Mount Stem Spacer 5mm35mm bolts for use with two Burgtec Direct Mount Stem Spacer 5mm40mm bolts for use with three Burgtec Direct Mount Stem Spacer 5mm
The Burgtec Direct Mount Stem Spacer Bolts are only for use in conjunction with the Burgtec Direct Mount Stem Spacer. The bolts are used to securely fasten the stem to the fork when using the Direct Mount Stem Spacers.30mm bolts for use with one Burgtec Direct Mount Stem Spacer 5mm35mm bolts for use with two Burgtec Direct Mount Stem Spacer 5mm40mm bolts for use with three Burgtec Direct Mount Stem Spacer 5mm
The Burgtec Direct Mount Stem Spacer Bolts are only for use in conjunction with the Burgtec Direct Mount Stem Spacer. The bolts are used to securely fasten the stem to the fork when using the Direct Mount Stem Spacers.30mm bolts for use with one Burgtec Direct Mount Stem Spacer 5mm35mm bolts for use with two Burgtec Direct Mount Stem Spacer 5mm40mm bolts for use with three Burgtec Direct Mount Stem Spacer 5mm
The Burgtec Direct Mount Stem Spacer is a no fuss mod for racers who want to lift the front end of the DH bike. Perfect for steeper tracks the Spacer allows you to adjust the height of your front end by sitting between your stem and crown.Fits BoXXers, Fox 40, DVO, Manitou, Marzocchi any other forks that use IS mountOnly available in 5mm stack heightWeight 15 gramsColour Burgtec BlackIncludes bolts
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro’s and Bro’s alike. It was obvious we all live for the same challenge of pushing our own limits. As riders we want a Stem that inspires confidence to change lines through the middle of a rock garden like it’s no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear to ear grins and saying to your mates at the bottom of a trail “Did you see that?”. From the start of the design process it became clear that we wanted extra rigidity. To yield this we would need to make the Stem using a forging process - a new thing for us. The result of which allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result this gives superior strength fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We’ve vastly increased this to give a stout rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product it’s fully CNC machined and anodized in all your favourite flavours. Tested with the world’s fastest jibbers and sendiest racers this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. Forged and Fully CNC machined from AL6061 – T6 Aluminium Stainless Steel Hardware Available lengths - 35mm 42.5mm and 50mm Available in both 31.8mm and 35mm Clamp Weight; 35mm 138g 42.5mm 152g 50mm 160g Available in 9 Colours. Burgtec Black Race Red Deep Blue Purple Rain Kash Bronze Iron Bro Orange Rhodium Silver Burgtec Bullion Gold and Toxic Barbie Pink
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro’s and Bro’s alike. It was obvious we all live for the same challenge of pushing our own limits. As riders we want a Stem that inspires confidence to change lines through the middle of a rock garden like it’s no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear to ear grins and saying to your mates at the bottom of a trail “Did you see that?”. From the start of the design process it became clear that we wanted extra rigidity. To yield this we would need to make the Stem using a forging process - a new thing for us. The result of which allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result this gives superior strength fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We’ve vastly increased this to give a stout rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product it’s fully CNC machined and anodized in all your favourite flavours. Tested with the world’s fastest jibbers and sendiest racers this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. Forged and Fully CNC machined from AL6061 – T6 Aluminium Stainless Steel Hardware Available lengths - 35mm 42.5mm and 50mm Available in both 31.8mm and 35mm Clamp Weight; 35mm 138g 42.5mm 152g 50mm 160g Available in 9 Colours. Burgtec Black Race Red Deep Blue Purple Rain Kash Bronze Iron Bro Orange Rhodium Silver Burgtec Bullion Gold and Toxic Barbie Pink
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro’s and Bro’s alike. It was obvious we all live for the same challenge of pushing our own limits. As riders we want a Stem that inspires confidence to change lines through the middle of a rock garden like it’s no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear to ear grins and saying to your mates at the bottom of a trail “Did you see that?”. From the start of the design process it became clear that we wanted extra rigidity. To yield this we would need to make the Stem using a forging process - a new thing for us. The result of which allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result this gives superior strength fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We’ve vastly increased this to give a stout rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product it’s fully CNC machined and anodized in all your favourite flavours. Tested with the world’s fastest jibbers and sendiest racers this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. Forged and Fully CNC machined from AL6061 – T6 Aluminium Stainless Steel Hardware Available lengths - 35mm 42.5mm and 50mm Available in both 31.8mm and 35mm Clamp Weight; 35mm 138g 42.5mm 152g 50mm 160g Available in 9 Colours. Burgtec Black Race Red Deep Blue Purple Rain Kash Bronze Iron Bro Orange Rhodium Silver Burgtec Bullion Gold and Toxic Barbie Pink
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.