Satellite power On/Off switch for Shimano STEPS E-bikes,EW-SD300 wire compatible semi-integrated frame satellite switch,With E-tube cable, 1100 mm.
Our Plus 35 Stem sports beautiful water decals, a dual machine finish on the body, and polishing on the faceplate. A 35mm clamp is ideal for strength to weight ratio, integrated T25 hardware with rounded heads prevents injury, and two stem lengths are available to perfectly suit your needs. Key Features: Clamp: 35mm Bar Clamp Diameter | 1-1/8" Steerer Clamp | 40mm Steerer Clamp Stack, Water decals, dual finish on the body, polishing on the faceplates, and integrated T25 hardware with rounded heads prevents injury,Material: 7050 Aluminium,Rise: 0 Degree,Weight: 40mm: 145g / 50mm: 150g,Width: 58mm.
The DMR Defy 35 stem is the perfect MTB stem for your Trail/All mountain build. This DMR defy mountain bike stem features a low stack height, Top-Close clamp design, 35mm reach and 5mm rise. This DMR Defy stem has wide clamping area for bar stability and stubby length to pair well with aggressive modern geometry.Key Features:CNC 6061 Alloy,27mm Stack height,35mm reach,5mm rise,176g.
With two different insert rings and an aluminium insert preventing any direct contact with your bearing's surface, the Oversized Crown Race Setting System CRS-15.2 allows you to gently tap the end cap to fix the race firmly and accurately in place. Bundled with an extension for working on fork steering tubes up to 425mm, this is a great bit of kit making sure your races are set correctly.
Park Tool Crown Race Setting System (CRS-15.2)Designed for the fitting of bearing races for 1.5" and 1-1/4" forks, the Crown Race Setting System CRS-15.2 allows you to do so in an easy, damage-free manner. Safe and Accurate Race Seating The system utilises two different insert rings and a further aluminium insert to ensure there is no direct contact with your bearing's surface as you lightly hammer the tube's end cap to seat the race firmly and properly in place. Including an extension that will allow you to work on fork steering tubes up to 425mm, the Crown Race Setting System CRS-15.2 will allow you to fit your races safely and accurately. Features: Material: Aluminium SHIS Terminology: CRS-15 services crown races in SHIS 33 and 40. Compatible Bearing Races: 1.5", 1-1/4" Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR Defy35 Limited Edition MTB StemThis limited edition stem features a robust 6061 alloy construction, which gives you a secure and dependable connection between your handlebars and your fork's steerer tube. DMR has also put this version through its CNC-machining process, which shaves off any unnecessary material while still maintaining its strength. This means that you'll benefit from its exceptional durability without worrying about adding any excess grams to your ride. With a wide clamping area and a Top-Close clamp design, this model offers increased bar stability and its stubby length pairs well with aggressive modern mountain bike (MTB) geometry.Limited Edition Stem with DMR Liquid Camo FinishPart of DMR's special edition Liquid Camo series, this MTB stem is kitted out with a triple-anodised finish. This makes it extremely tough, wear-resistant and protected against corrosion when shredding the trails in all-weather conditions. Coming equipped with eye-catching camo graphics, it looks as amazing as it performs while also complementing your ride.Features: Material: CNC-machined 6061 Alloy Finish: Triple-anodised, Liquid Camo Use: MTB Dimensions: 85mm Long / 53mm Wide / 54mm Tall Stack Height: 27mm Reach: 35mm Rise: 5mm Included: Stem cap Top-Close clamp design Weight: 176gBuy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness. The Thomson X4 stem allows you to realize the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design. Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTB The Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It’s built and tested to the same standards as aerospace parts and it’s the best stem for all-around mountain bike and cyclocross riding. Precise steering, tracking and more riding control. Traditional, knee friendly steerer clamp. One piece 7000 series Aluminium. Machined by Thomson, in Macon, Georgia. Available in Black or Silver. Available from 40mm to 130mm lengths. 40-60mm stems are available in block style only..
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro’s and Bro’s alike. It was obvious we all live for the same challenge of pushing our own limits. As riders we want a Stem that inspires confidence to change lines through the middle of a rock garden like it’s no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear to ear grins and saying to your mates at the bottom of a trail “Did you see that?”. From the start of the design process it became clear that we wanted extra rigidity. To yield this we would need to make the Stem using a forging process - a new thing for us. The result of which allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result this gives superior strength fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We’ve vastly increased this to give a stout rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product it’s fully CNC machined and anodized in all your favourite flavours. Tested with the world’s fastest jibbers and sendiest racers this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. Forged and Fully CNC machined from AL6061 – T6 Aluminium Stainless Steel Hardware Available lengths - 35mm 42.5mm and 50mm Available in both 31.8mm and 35mm Clamp Weight; 35mm 138g 42.5mm 152g 50mm 160g Available in 9 Colours. Burgtec Black Race Red Deep Blue Purple Rain Kash Bronze Iron Bro Orange Rhodium Silver Burgtec Bullion Gold and Toxic Barbie Pink
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro’s and Bro’s alike. It was obvious we all live for the same challenge of pushing our own limits. As riders we want a Stem that inspires confidence to change lines through the middle of a rock garden like it’s no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear to ear grins and saying to your mates at the bottom of a trail “Did you see that?”. From the start of the design process it became clear that we wanted extra rigidity. To yield this we would need to make the Stem using a forging process - a new thing for us. The result of which allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result this gives superior strength fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We’ve vastly increased this to give a stout rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product it’s fully CNC machined and anodized in all your favourite flavours. Tested with the world’s fastest jibbers and sendiest racers this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. Forged and Fully CNC machined from AL6061 – T6 Aluminium Stainless Steel Hardware Available lengths - 35mm 42.5mm and 50mm Available in both 31.8mm and 35mm Clamp Weight; 35mm 138g 42.5mm 152g 50mm 160g Available in 9 Colours. Burgtec Black Race Red Deep Blue Purple Rain Kash Bronze Iron Bro Orange Rhodium Silver Burgtec Bullion Gold and Toxic Barbie Pink
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro’s and Bro’s alike. It was obvious we all live for the same challenge of pushing our own limits. As riders we want a Stem that inspires confidence to change lines through the middle of a rock garden like it’s no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear to ear grins and saying to your mates at the bottom of a trail “Did you see that?”. From the start of the design process it became clear that we wanted extra rigidity. To yield this we would need to make the Stem using a forging process - a new thing for us. The result of which allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result this gives superior strength fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We’ve vastly increased this to give a stout rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product it’s fully CNC machined and anodized in all your favourite flavours. Tested with the world’s fastest jibbers and sendiest racers this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. Forged and Fully CNC machined from AL6061 – T6 Aluminium Stainless Steel Hardware Available lengths - 35mm 42.5mm and 50mm Available in both 31.8mm and 35mm Clamp Weight; 35mm 138g 42.5mm 152g 50mm 160g Available in 9 Colours. Burgtec Black Race Red Deep Blue Purple Rain Kash Bronze Iron Bro Orange Rhodium Silver Burgtec Bullion Gold and Toxic Barbie Pink
Key Features:Smart Cable Routing (SMR),3D forged and CNC machined AL6061,Alloy faceplate,Chromoly hardware,Fine blasted anodized black,Weight: 235g.
Specifically designed for road bikes, this high-quality stem is engineered to deliver a strong and secure connection between your handlebar and your fork's steerer tube. Its 3D forged and CNC-machined aluminium construction means that any excess material has been shaved off to keep weight to a minimum, while still offering maximum durability. Vision has also equipped this model with a unidirectional (UD) carbon finish, which uses a carbon skin that's applied through a CSI process for reinforcing the strength of the aluminium centre and ensuring an exceptionally low weight from the carbon. Coming complete with a four-bolt alloy faceplate that's fine-blasted and anodised, this road stem provides a dependable interface for holding your ride together, mile after mile. Manufacturer's Part Numbers: 670-0338016030 80mm 670-0338017030 90mm 670-0338018030 100mm 670-0338019030 110mm 670-0338020030 120mm 670-0338021030 130mm