A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1 inch setting rings and three 1-1/8 inch setting ringsSafer and easier to use than traditional slide hammers
The BTA HSF800 system has a bottle that has been designed to hide the cage from the wind. We worked to minimise frontal area wherever possible to avoid adding aero drag to your setup.The system features a Garmin mount on the cage above the bottle for easy viewing,The revised and new mounting bracket offers greater compatibility than previous models,Redesigned cage has a high retention design,Bottle unscrews at the middle to make for easy cleaning,Easy to open secure fill port lid to avoid any sports drink splashing over bike or rider,800ml capacity.Please watch the cleaning and assembly video before purchasing
The Nukeproof Sam Hill Horizon Stem is the newest addition to the Nukeproof cockpit component range. Developed alongside Nukeproof pro athlete, Sam Hill, the Horizon stem has been tested in the most demanding Enduro and Downhill conditions; Nukeproof has optimised this stem to be lightweight and ultra-strong.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the titanium steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The faceplate has also been designed specifically with "no gap" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and is also included within the stem packaging.Features:Precision CNC-machined,Lazer etched Sam Hill logo,Titanium bolts,Opposing offset steerer clamp to give maximum thread contact,Knee-friendly steerer clamp design,Four-bolt front mount face plate,Bar Clamp: 31.8mm, 35mm,Steerer Diameter: 1 1/8",Length: 35mm, 50mm, 60mm,Rise: +/- 5mm,Stack Height: 35mm.
A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1 inch setting rings and three 1-1/8 inch setting ringsSafer and easier to use than traditional slide hammers
Hope AM/FR StemCNC machined from a single piece of 2014 T6 aluminium, the AM/FR stem brings you increased levels of strength, rigidity and handling. One of the strongest and more durable mountain bike stems on the market, it's strength and clamping force is further enhanced by the four opposing handlebar clamping bolts. To further reduce the weight, Hope adapted its design to remove extra material but without compromising on toughness or durability.Reasons to Buy: Increased strength, rigidity and handling. One of the strongest and more durable mountain bike stems on the market. Reduced weight without compromising durability.Features: Material: CNC Machined from 2014 T6 Aluminium Head size: 1-1/8" Diameter: 31.8mm Invertible: No Stem Cap Included: No Opposing steerer clamp bolts and four-bolt handlebar clamp give exceptionally rigid steering Anodised and laser etched 3D milled detailing Compatible with Hope Light systems Weight: 133g (0°)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness. The Thomson X4 stem allows you to realise the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampOne piece 7000 series Aluminium31.8mm ClampMachined by Thomson, in Macon, GeorgiaAvailable in 45mm, 75mm and 95mm lengthsCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It s built and tested to the same standards as aerospace parts and it s the best stem for all-around mountain bike and cyclocross riding.
Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness. The Thomson X4 stem allows you to realise the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampOne piece 7000 series Aluminium31.8mm ClampMachined by Thomson, in Macon, GeorgiaAvailable in 45mm, 75mm and 95mm lengthsCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It s built and tested to the same standards as aerospace parts and it s the best stem for all-around mountain bike and cyclocross riding.
Too many modern mountain bike stems sacrifice strength and torsional stiffness for a few grams of saved weight. The Thomson X4 is the leader in strength and stiffness. The Thomson X4 stem allows you to realise the benefits of stiffer forks and stiffer 31.8mm bars. X4 offers precise steering, tracking and more control while riding, all wrapped up in a beautiful design.Leader in strength and stiffnessPrecise steering, tracking and more riding controlTraditional, knee friendly steerer clampOne piece 7000 series Aluminium31.8mm ClampMachined by Thomson, in Macon, GeorgiaAvailable in 45mm, 75mm and 95mm lengthsCertified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBThe Thomson X4 is stronger and 30g lighter than the Thomson Elite 25.4mm mountain stem. It features a traditional steerer clamp that is shaped to save weight and to be knee friendly. X4 is absolutely the best combination of strength and weight available. Thomson stems are the strongest in the industry, meaning enduro and downhill riders can run Thomson confidently. The stem is one piece of solid 7000 series Aluminium extruded billet precision, machined by Thomson in Macon, Georgia. It s built and tested to the same standards as aerospace parts and it s the best stem for all-around mountain bike and cyclocross riding.
Making its debut on the all-new Roubaix the S-Works Future stem is the stiff lightweight upgrade that your Roubaix has been waiting for. It’s compatible with all Future Shocks (with shim) and our Specialized accessory mount and its sleek design will create a seamless integration. Sleek & seamless integration with all Future Shocks (with shim see below). Supremely stiff for responsive handling and feel. Compatible with the Specialized accesory mount. 6-degree rise Length options: 70-140mm Approximate weight: 145g (100mm) *If you wish to make a stem length change on your current Future Stem 2.0 equipped 2020 Roubaix you require no additional parts. *For none 2.0 Future Shock versions you would need the shim adapter see our product ID- '82856'
Chromag BZA 35mm Mountain Bike StemCNC Machined from a premium 6061 Alloy, the BZA 35mm bike stem is perfect for pairing with the geometry seen on today’s mountain bikes (MTBs), which tend to have longer top tubes for increased stability. At only 35mm in length, it gives you snappy, responsive steering for attacking the most technical trail sections at speed. Tipping the scales at only 165 grams, it’s an ideal match for larger 35mm handlebars such as Chromag’s OSX 35 and BZA models.Features: Material: Full CNC Machined Premium 6061 AlloyRise: 0°Bar Clamp Area: 35mmSteerer Tube Clamp Area: 1.1/8"Stack Height: 38mmInvertible: NoStem Cap Included: NoSharp, clean and intricate designStrong, stiff and lightweightDesigned for the BZA or OSX 35 handlebarManufactured and assembled in Whistler, CanadaWeight: 165g (35mm extension)Please Note: This stem is only compatible with handlebars with a central clamp area of 35mm in diameter.Buy Chromag Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The 3D-forged and CNC-machined S-Works SL stem is sleek stiff lightweight and strong. It comes in six different length options features a six-degree rise and weighs 110-115g in its 110mm option. 3D-forged and CNC-machined 7075 aluminium road stem . Includes expander plug for carbon steerer tubes and titanium hardware. Lengths: 70 80 90 100 110 120 130mm Rise: 6 12 or 17 degree rise Weight: 110-115g (for 110mm) Clamp Diameter: 31.8mm Clamp Height: 40mm Steerer Tube: 1-1/8”
With its opposing steerer tube clamping bolts, the Hope XC/FR stem provides exceptionally rigid steering characteristics for your trail-ready MTB. It’s also available in a wide range of lengths and anodised colour options.