This mountain bike (MTB) stem is specifically designed for the rigours of modern trail riding and all mountain exploring. It comes equipped with a hard-wearing 6061 alloy build to ensure a strong and secure connection between your handlebar and your fork's steerer tube. Suitable for use on handlebars with a 31.8mm bar clamp diameter and forks with a 1 1/8" steerer diameter, this is a great choice of upgrade for holding your steering set-up together as you conquer your way around the mountain. Manufacturer's Part Numbers: 91360060002 Black/White 110mm 7 Degrees 91360060004 Black/White 80mm 12 Degrees 91360060006 Black/White 110mm 12 Degrees
All set for the next trail adventure, this MTB stem features a high-grade alloy build to achieve the perfect balance of strength, stiffness and weight. Syncros has also put this model through a sandblasting process for extra protection against wear as well as an anodising finishing process for corrosion resistance. This allows it to deliver a strong and secure connection for your steering setup in all weather conditions. Compatible with handlebars that feature a 31.8mm bar clamp diameter and forks with a 1 1/8" steerer diameter, it's engineered to ensure a dependable hold as you tackle the more demanding of terrain conditions. Manufacturer's Part Numbers: 91360060021 Black/Grey 130mm 91360060022 Black/Grey 120mm 91360060023 Black/Black 80mm 91360060024 Black/Black 70mm
Keeping your BMX held together with style, this hard-wearing stem is more than capable of handling all the knocks and bumps that come with nailing your favourite tricks at the skatepark. Seal BMX has also equipped this model with a classic top load design with a 50mm reach and a 30mm stack height.
When replacing your old pads, take note of which sized washer is brake side (large or small) and replace accordingly.
ENVE Pressure Relief Presta Valve Stem NutsThese valve stem nuts come as a pack of two and are specifically designed to ensure that an improper tubeless tape set-up doesn't result in a damaged rim. If the tubeless seal between your tyre's air chamber and the rim's cavity is breached, the rim's cavity can become pressurised resulting in a pressurised rim and potential delamination of the rim's sidewall. These pressure relief valve stem nuts prevent this from happening by creating an escape for the air via fluted reliefs on the inner diameter of the nut. Air escaping from these ports, indicates a compromised tubeless seal.Recommended for all tubeless ENVE SES wheelsets as well as other brand road tubeless wheelsets.Features: Use: Road Size: Comes as a pack of two Manufacturer's Part Numbers: EN7201012Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus ZX-1 Evo Stem Cable GuideThis cable guide is developed specifically for use with Vitus ZX-1 Evo road bike stems from 2021 to present. Perfect for tidying up your cable routing. Genuine Vitus spare parts.Features: Use: Road Compatibility: Vitus ZX-1 Evo (2021-Present) Genuine Vitus spare partsBuy Vitus Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Mountain Bike StemThe Brand-X Mountain Bike Stem is constructed from 3D forged aluminium ensuring it is incredibly durable and strong, without compromising on weight. Featuring a flip design which ensures the front end stays low, it is made for a clamping zone of 31.8mm, making it the perfect choice for a 29" or 27.5" bike. Features:Sizes: 60, 70 + 80mm LengthsRise: 7 DegreesClamp Diameter: 31.8Material: 3D Forged AluminiumFinish: AnodisedColour: BlackEN-M ApprovedWeight: 146 grams (60mm)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Enduro Mountain Bike StemCreated from a 3d forged aluminium construction, this stem is highly durable and stiff, yet also incredibly lightweight, so you can tackle whatever challenges you meet on the trails. Designed to be used alongside a bar with a clamping zone of 31.8mm, it is available in lengths of 40, 50 and 60mm.The Flip/Flop design allows the user to easily run it upside down to help keep the front end low; ideal for a 29” or 27.5” bike, where the front tends to be higher than you may want.Features:Sizes: 40mm, 50mm, 60mmRise: 3 degreesClamp Diameter: 31.8mmMaterial: 3D Forged AluminiumFinish: AnodisedColour: BlackEN-M ApprovedWeight: 114g (40mm), 131g (50mm) and 134g (60mm)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Seal BMX Switch Top Load StemMade from lightweight alloy, the Seal BMX Switch Top Load Stem features a classic top load design with a 50mm reach and 30mm stack height.Features: Material: AlloySteerer Clamp Diameter: 1 1/8" Reach: 50mm Stack Height: 30mm Top load stem Buy Seal BMX Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Syncros 6061 Alloy StemThis mountain bike (MTB) stem is specifically designed for the rigours of modern trail riding and all mountain exploring. It comes equipped with a hard-wearing 6061 alloy build to ensure a strong and secure connection between your handlebar and your fork's steerer tube. Suitable for use on handlebars with a 31.8mm bar clamp diameter and forks with a 1 1/8" steerer diameter, this is a great choice of upgrade for holding your steering set-up together as you conquer your way around the mountain.Features: Material: 6061 Alloy Use: Mountain Bike (MTB) Bar Clamp Diameter: 31.8mm Steerer Diameter: 1 1/8"Manufacturer's Part Numbers: 91360060002 Black/White 110mm 7 Degrees 91360060004 Black/White 80mm 12 Degrees 91360060006 Black/White 110mm 12 DegreesBuy Syncros Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Syncros TR1.5 Alloy StemAll set for the next trail adventure, this MTB stem features a high-grade alloy build to achieve the perfect balance of strength, stiffness and weight. Syncros has also put this model through a sandblasting process for extra protection against wear as well as an anodising finishing process for corrosion resistance. This allows it to deliver a strong and secure connection for your steering setup in all weather conditions. Compatible with handlebars that feature a 31.8mm bar clamp diameter and forks with a 1 1/8" steerer diameter, it's engineered to ensure a dependable hold as you tackle the more demanding of terrain conditions.Features: Material: Alloy Finish: Sandblasted and Anodised Use: Mountain Bike (MTB) Bar Clamp Diameter: 31.8mm Steerer Diameter: 1 1/8" Faceplate: 4-boltBuy Syncros Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Thermal Bag provides total body coverage for maximum personal protection and is an essential part of any outdoor survival kit When a person is inside the bag it will reflect and retain over 90% of radiated body heat Strong metalised polyester materials Thermally welded and taped seams Windproof waterproof and radar reflective Weight: 220g Dimensions: Packed: 9 x 14 x 4cm Unpacked: 240 x 90cm