Fox Suspension 38 Float Performance Grip ForkPart of Fox Suspension's Performance Series, this enduro fork features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT GRIP DamperInspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, the Fox Suspension 38 Float Performance Grip Fork sets a new benchmark for confidence, performance, and durability. Features: Upper Tubes Finish: Anodised Use: Enduro Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP (3-position on-the-fly adjustability) Adjustments: Compression damping positions Open, Medium, Firm; Additional micro-adjust between settings Detents; Low-speed rebound Travel: 170mm Rake: 44mm Compatible Rotor Size: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 2180gTechnologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways we've further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not. 58mm crown diameter to match modern frame shape profiles. Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model.Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Perf E-Optimized Grip ForkThis electric mountain bike (E-MTB) suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.E-MTB Fork with FIT GRIP DamperInspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tubes Finish: Anodised Use: Electric Mountain Bike (E-MTB) Axle Size: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: GRIP (Three position on-the-fly adjustability) Travel: 160mm Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatibleTechnologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately).Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 34 Float AWL ForkEngineered for modern electric mountain bike (E-MTB) riding, this suspension fork features anodised upper tubes for an excellent balance of strength and durability as well as extra protection against corrosion during wetter rides. Its combination of a lightweight Float EVOL air spring and a RAIL damper smoothen out your ride, so you can stay in full control as you conquer your way from trail to trail. Benefitting from Boost axle spacing and 160mm to 230mm disc brake rotor compatibility, this model is designed prepared for fast and fun adventures, wherever your next ride takes you.AWL: Adventure Without LimitsDesigned to bring highly evolved, broadly tuneable, super capable, ultra-reliable suspension to the cycling SUV market. Whether you are racing the clock to fit in another lap, or riding further than you have ever before, AWL suspension is here to make every ride limitless.Race PedigreeLeveraging FOX's extensive experience with building the world's highest-performance off-road suspension systems, the AWL fork is based around the acclaimed FOX 34 chassis. Featuring lightweight but stiff 34mm stanchions and a precision cast magnesium lower, the AWL tracks precisely without any unwanted flex and ensures optimal long-term performance, regardless of the weather and dirt you plough through. Performance and adjustability are paramount thanks to our infinitely tuneable EVOL air spring and proven Rail damper. Externally adjustable rebound and compression damping are tool-free and easily accessible, while the Rail's sealed damper system delivers exceptional performance, bomber reliability, and hassle-free maintenance.Everyday Adventure ReadyAWL's stout chassis is available in both 27.5” and 29” wheel sizes and is rigorously tested to withstand a 169kg total weight rating. Fender, rack and light mounts are integrated into the fork for optimal compatibility, durability and versatility. Adverse conditions, rocks and roots will no longer harm your zip tied fenders. The AWL also comes with a special mount for a soon to be available, next level safety feature. Designed to handle whatever you load it up with and track smoothly and precisely across whatever terrain you point it at, the AWL can unlock your bike's electric potential, open up new landscapes, and bring adventure to your everyday ride.Features: Upper Tubes Finish: Anodised Use: Electric Mountain Bike (E-MTB) Axle Size: 15QRx110mm, Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: RAIL Brake Rotor Compatibility: 160mm direct Post Mount, Up to 230mm compatible Max Tyre Size: 2.8" (2.6" with a fender)Technologies: E-SUV Optimised: The explosion of electric assist technology has radically altered the cycling landscape. Not only are dedicated mountain bikers exploring new terrain and carrying more momentum over bigger obstacles, but capabilities across the entire e-cycling continuum have ramped up massively. This has put a whole new set of performance - and safety - demands on bikes and their components. People are riding farther, faster, and hauling more gear across more varied terrain than ever before and they need proven, high-performance suspension that can handle this new range of needs. RAIL Damper: RAIL damper is a simplified version of Fox Suspension's renowned GRIP damper. It offers an unmatched ride feel combined with bombproof durability and easy-to-use on-the-fly adjustment ranging from wide open to fully locked out.Manufacturer's Part Numbers: 910-20-210 Black 29" QR110 100mm 51mm 910-21-045 Black 29" QR110 140mm 51mm 910-20-211 Black 27.5" QR110 120mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Adaptor for the Park CRC-1 that allows the quick and perfect facing of 1.5' / 39.8 mm standard crown racesDesigned for use on tapered steerer forksGrub screws lock adaptor and cutter in place for easy useIncludes precision ground crown race cutterFor best results use plenty of Park CF-2 cutting fluid
Cyclus Steerer Cutting Guide for 1 and 1/8' Steerers
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction.• 3D forged 7075• CNC machined for weight reduction• Four bolt handlebar clamp• Two bolt steerer clamp• Strength and weight• The right spec for trail and enduro• Perfect match with Descendant 35mm handlebars
Park Tool Threadless Saw Guide SG-6The SG-6 Threadless Saw Guide ensures a straight, clean cut on 1", 1-1/8", and 1-1 4" threadless forks. Simply clamp the SG-6 onto the fork and cut, letting the SG-6 guide the hacksaw blade.The SG-6’s non scratching composite body incorporates steel threads and a steel reinforcing plate to withstand the rigors of heavy shop use.NOTE: SG-6 is intended for use with a steel hacksaw blade.Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Fork steerer cutter for for seat posts handlebars etc.,Compatible with 6-38mm diameter tubes.,Spare cutting wheel included..
Key Features:1.1/8", 36°×45° ACB,For tapered 50mm/62mm OD Head Tube,1.1/8" to 1.5" steerer,Alloy top cover,Upper: Forged alloy cup with ACB (blue seal),Lower: 1.5" CNC machined alloy cup with ACB (blue seal),Stack height: 16.9 + 2.9 = 19.8mm,Weight: 129.6g.
Super light weight storage for essential tools, hidden away in your steerer tube. The Stash hides an 8-piece multi-tool and spoke key inside your steerer,weighing just 145g.Installation is quick and easy with no tapping of your steerer required. 8-piece Multi-tool: 2, 2.5, 3, 4, 5, 6, T25, Flathead,Spoke key: 0, 1, 2, 3 with valve core removing function,System weight (incl. multi-tool): 135g,Multi-Tool weight: 57g,Color: Black and Orange.Note:Compatible with tapered and 1-1/8" straight steer tubes with different low cap options.,Suitable for MTB with the "bottom of fork crown to top of stem"length from 150mm to 240mm..
Key Features:For up to 1-1/4" (32mm) tubes.90-degree no swing design.Cr-Mo Steel construction.
Key Features: For tapered 50/68mm OD head tube,For 1.1/8" to 1.5" tapered fork,Alloy top cover,Upper: forged alloy cup with ACB,Lower: 1.5" CNC machined alloy cup with ACB,Stack Height: 16.9 + 2.9=19.8mm,Weight: 128.5g.