The Flank Core is designed to keep your torso protected in the event of a crash and utilises D3O shock absorbing protective foam to keep your vitals safe in during an impact. The Flank is the perfect choice for any extreme rider who is searching for lightweight protection that is comfortable with a fit and forget mentality for a day on the descent. The Flank uses D3O foam plates to protect the shoulders and spine from impact damage and a custom Heat-Moulded foam chest plate to protect the ribs sternum. This protective top is also compatible with leading neck braces and the Lycra stretch panels with flatlock seams ensures mobility and comfort all day long.Size Chart:
The Flank Core is designed to keep your torso protected in the event of a crash and utilises D3O shock absorbing protective foam to keep your vitals safe in during an impact. The Flank is the perfect choice for any extreme rider who is searching for lightweight protection that is comfortable with a fit and forget mentality for a day on the descent. The Flank uses D3O foam plates to protect the shoulders and spine from impact damage and a custom Heat-Moulded foam chest plate to protect the ribs sternum. This protective top is also compatible with leading neck braces and the Lycra stretch panels with flatlock seams ensures mobility and comfort all day long.Size Chart:
The Flank Core is designed to keep your torso protected in the event of a crash and utilises D3O shock absorbing protective foam to keep your vitals safe in during an impact. The Flank is the perfect choice for any extreme rider who is searching for lightweight protection that is comfortable with a fit and forget mentality for a day on the descent. The Flank uses D3O foam plates to protect the shoulders and spine from impact damage and a custom Heat-Moulded foam chest plate to protect the ribs sternum. This protective top is also compatible with leading neck braces and the Lycra stretch panels with flatlock seams ensures mobility and comfort all day long.Size Chart:
Leatt MTB AllMtn 3.0 HelmetThe Leatt MTB AllMtn 3.0 Helmet has been created to offer all-round comfort and it's stacked with features for boosting safety and confidence when you're mountain biking.The MTB AllMTN 3.0 Helmet features a lightweight polymer shell to brush off the dings and bumps from overhanging branches. This durable outer shell is directly moulded to the impact-absorbing foam core. Should you be unfortunate enough to crash, this core soaks up and dissipates impact forces. The 3.0 also features Leatt's 360 ̊ Turbine Technology.360 ̊ Turbine TechnologyThe 360 ̊ Turbine Technology is focused on reducing the damaging effects of a crash on your brain. It works via 360 ̊moving discs, all made from an energy-absorbing material. These impart a reduction of rotational acceleration to the head and brain by up to 40%. The system also improves the absorption of impact energy - it reduces peak brain acceleration by up to 30% at the impact speeds associated with concussion. Cool and ComfortableRowdy riding will soon see you sweating. But with a total of 20 vents, you'll enjoy excellent airflow, letting in cool air and allowing sweat to escape. Inside, the moisture-wicking padding also adds to the excellent comfort levels. They're anti-odour and washable too, letting you keep everything fresh for every ride. Features:Lightweight polymer shellIn-moulded impact foam for superior energy absorption360-degree Turbine Technology - Reduces forces associated with concussionAdjustable visor with breakaway function for rotational impact force reductionMaximized ventilation with 20 vents effective even at low speedsFidlock magnetic closure systemSunglasses dock port for easy, secure storageMoisture-wicking, breathable, anti-odour and washable inner linerCertified and tested: EN1078Weight: from 350gBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt MTB AllMtn 3.0 HelmetThe Leatt MTB AllMtn 3.0 Helmet has been created to offer all-round comfort and it's stacked with features for boosting safety and confidence when you're mountain biking.The MTB AllMTN 3.0 Helmet features a lightweight polymer shell to brush off the dings and bumps from overhanging branches. This durable outer shell is directly moulded to the impact-absorbing foam core. Should you be unfortunate enough to crash, this core soaks up and dissipates impact forces. The 3.0 also features Leatt's 360 ̊ Turbine Technology.360 ̊ Turbine TechnologyThe 360 ̊ Turbine Technology is focused on reducing the damaging effects of a crash on your brain. It works via 360 ̊moving discs, all made from an energy-absorbing material. These impart a reduction of rotational acceleration to the head and brain by up to 40%. The system also improves the absorption of impact energy - it reduces peak brain acceleration by up to 30% at the impact speeds associated with concussion. Cool and ComfortableRowdy riding will soon see you sweating. But with a total of 20 vents, you'll enjoy excellent airflow, letting in cool air and allowing sweat to escape. Inside, the moisture-wicking padding also adds to the excellent comfort levels. They're anti-odour and washable too, letting you keep everything fresh for every ride. Features:Lightweight polymer shellIn-moulded impact foam for superior energy absorption360-degree Turbine Technology - Reduces forces associated with concussionAdjustable visor with breakaway function for rotational impact force reductionMaximized ventilation with 20 vents effective even at low speedsFidlock magnetic closure systemSunglasses dock port for easy, secure storageMoisture-wicking, breathable, anti-odour and washable inner linerCertified and tested: EN1078Weight: from 350gBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt MTB AllMtn 3.0 HelmetThe Leatt MTB AllMtn 3.0 Helmet has been created to offer all-round comfort and it's stacked with features for boosting safety and confidence when you're mountain biking.The MTB AllMTN 3.0 Helmet features a lightweight polymer shell to brush off the dings and bumps from overhanging branches. This durable outer shell is directly moulded to the impact-absorbing foam core. Should you be unfortunate enough to crash, this core soaks up and dissipates impact forces. The 3.0 also features Leatt's 360 ̊ Turbine Technology.360 ̊ Turbine TechnologyThe 360 ̊ Turbine Technology is focused on reducing the damaging effects of a crash on your brain. It works via 360 ̊moving discs, all made from an energy-absorbing material. These impart a reduction of rotational acceleration to the head and brain by up to 40%. The system also improves the absorption of impact energy - it reduces peak brain acceleration by up to 30% at the impact speeds associated with concussion. Cool and ComfortableRowdy riding will soon see you sweating. But with a total of 20 vents, you'll enjoy excellent airflow, letting in cool air and allowing sweat to escape. Inside, the moisture-wicking padding also adds to the excellent comfort levels. They're anti-odour and washable too, letting you keep everything fresh for every ride. Features:Lightweight polymer shellIn-moulded impact foam for superior energy absorption360-degree Turbine Technology - Reduces forces associated with concussionAdjustable visor with breakaway function for rotational impact force reductionMaximized ventilation with 20 vents effective even at low speedsFidlock magnetic closure systemSunglasses dock port for easy, secure storageMoisture-wicking, breathable, anti-odour and washable inner linerCertified and tested: EN1078Weight: from 350gBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
ProTaper MTB Carbon HandlebarOffering a fantastic balance of stiffness and strength as well as an impressively low weight, this mountain bike (MTB) riser handlebar is kitted out with a carbon construction. ProTaper has also put this model through its Plastic Foam Lamination (PFL) manufacturing process, which uses tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars. As a result, it uses less excess resin and fewer plys, resulting in a 15% lighter bar.Carbon MTB Riser Bar with Comfortable GeometryEngineered for wherever the trail leads you, this model is equipped with four degrees upsweep and eight degrees backsweep for comfortable and precise steering in demanding terrain conditions. Weighing in at only 190g, this is a great choice of upgrade for strong steering performance without any weight penalty.Features: Material: Carbon Use: MTB Width: 810mm Upsweep: 4 degrees Backsweep: 8 degrees Diameter: Multiple options available to select Rise: Multiple options available to select Weight: 190gTechnologies: ProTaper Carbon bars feature PFL (Plastic Foam Lamination) manufacturing. PFL utilises tiny particles and steam pressure in the lamination process to expand and shape the structure of the bars. The process uses less excess resin and fewer plys, resulting in a 15% lighter bar. Cut marks provide a range of width options. Textured Grit Grip finish in clamp areas eliminates over-tightening of components.Manufacturer's Part Numbers: 301-36182-C102 Black/Black Stealth 31.8mm 810mm 25.4mm Rise 301-36183-C101 Black/Black Stealth 35mm 810mm 25.4mm Rise 301-36182-C101 Black/Black Stealth 31.8mm 810mm 12.7mm RiseBuy ProTaper Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Osprey Women’s Tempest 30 BackpackThe Osprey Women's Tempest 30 Backpack was designed with lightweight multi-day trips and travellers in mind. When navigating technical terrain, an injection-moulded AirScape™ back panel and continuous-wrap harness and hip-belt move with you for optimum support and comfort, while built-in compression adapts to your journey to reduce bulk. The streamlined women’s-specific pack also features multiple pockets, ice axe and trekking pole attachment points, and a reservoir sleeve to keep you fully hydrated all day long and prepared for any eventuality.Additionally, reflective detail helps with your visibility in low-lit environments, and it comes constructed from high-quality, Bluesign-approved recycled high-tenacity Nylon with a PFC-free Durable Water Repellent coating that is kinder to the environment.FeaturesInjection moulded AirScape™ HDPE back panel with EVA foam paddingDie-cut EVA harness with stretch pocket; Sternum strap with emergency whistle; Padded hip-belt with twin zipped pocketsTop lid access; Under-lid zipped mesh pocketCompatible with Hydraulics™ Reservoirs; External hydration accessStretch front pocket; Zippered scratch-free sunglasses and electronics pocket; Internal key attachment clipStow-on-the-Go™ trekking pole attachment; Stowable twin ice axe loopsSide compression straps; Dual access side pockets with InsideOut™ compressionReflective graphics; LED light attachment pointDimensions: XS/S: H61 x W28 x D25cm; M/L: H66 x W28 x D25cm; Capacity: 30 litres; Weight: XS/S: 1070g approx.; M/L: 1290g approx.Buy Osprey Rucksacks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Osprey Women’s Tempest 30 BackpackThe Osprey Women's Tempest 30 Backpack was designed with lightweight multi-day trips and travellers in mind. When navigating technical terrain, an injection-moulded AirScape™ back panel and continuous-wrap harness and hip-belt move with you for optimum support and comfort, while built-in compression adapts to your journey to reduce bulk. The streamlined women’s-specific pack also features multiple pockets, ice axe and trekking pole attachment points, and a reservoir sleeve to keep you fully hydrated all day long and prepared for any eventuality.Additionally, reflective detail helps with your visibility in low-lit environments, and it comes constructed from high-quality, Bluesign-approved recycled high-tenacity Nylon with a PFC-free Durable Water Repellent coating that is kinder to the environment.FeaturesInjection moulded AirScape™ HDPE back panel with EVA foam paddingDie-cut EVA harness with stretch pocket; Sternum strap with emergency whistle; Padded hip-belt with twin zipped pocketsTop lid access; Under-lid zipped mesh pocketCompatible with Hydraulics™ Reservoirs; External hydration accessStretch front pocket; Zippered scratch-free sunglasses and electronics pocket; Internal key attachment clipStow-on-the-Go™ trekking pole attachment; Stowable twin ice axe loopsSide compression straps; Dual access side pockets with InsideOut™ compressionReflective graphics; LED light attachment pointDimensions: XS/S: H61 x W28 x D25cm; M/L: H66 x W28 x D25cm; Capacity: 30 litres; Weight: XS/S: 1070g approx.; M/L: 1290g approx.Buy Osprey Rucksacks from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Level TLM Disc BrakeFeaturing a durable forged aluminium lever, a two-piston caliper and industry-leading technologies, this mountain bike (MTB) hydraulic disc brake is ready for every trail riding adventure. SRAM know good value. It comes with practicality. Durability. Sensible design. The Level TLM is that sweet spot — alloy lever blades, DirectLink actuation, DOT 5.1 fluid, and SRAM's two-piston, two-piece caliper — all in a compact, lightweight package. This is the tried-and-true machinery, for all-day, never quit performance.Expandable BladderSRAM's brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved back-pressure relief, which produces dependable braking power and consistency.Heat ShieldThe stainless steel heat shield breaks the thermal connection between the pad and caliper body, reducing caliper fluid temperature by about 20°C even in the most extreme testing conditions.Bleeding EdgeWith this new caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four-piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed.DirectLinkSRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control.MatchMaker X IntegratedThe MatchMaker X clamp is more than just a clamp. Since each clamp accepts up to three controls, you can put everything from your XLoc suspension lockout, your SRAM shifters, SRAM brake levers and AVID brake levers as well as your Reverb XLoc remote, all on two clamps. Short of genetically engineering longer thumbs, it's the ideal way to put everything within easy reach.Timing Port ClosureA hydraulic brake's timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.Features: Lever Blade Material: Forged Aluminium Finish: Anodised Pad Type: Steel-backed Organic Use: Mountain Bike (MTB) Brake Type: Hydraulic disc brake Bracket: Direct Mount DIR Recommended MMX Clamp (Not Included): Stainless bolt, blk clamp Caliper: Two-piston, two-piece caliper Rotors Included: No, available separately Single or Pair: SingleBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Next Carbon Riser Bar (35mm)By adopting the larger 35mm clamping standard, the Next Carbon Riser mountain bike (MTB) handlebars bring you precise handling, increased durability and a super low weight of only 180g. Made from unidirectional carbon fibre and 760mm wide, they’re ideal for cross country (XC) racing and trail riding. These tough and efficient bars have 8° of backsweep and 5° of upsweep to put you in the ideal position for control and comfort.Features: Material: Unidirectional (UD) Carbon with matte clearcoat Carbon optimised flex for improved small bump compliance Comes with a Race Face 3 Year Warranty Built for: Cross Country (XC) Racing, Trail, Electric Bike (E-Bike) Backsweep: 8°Upsweep: 5°Weight: 180gBuy RaceFace Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt MTB AllMtn 4.0 HelmetThe Leatt MTB AllMtn 4.0 Helmet is just right for the more adventurous mountain biker who loves to explore big mountain trails. Fully featured for big days out, it keeps you safer when you lose control. Be it pedalling up or lift-assisted escapades, you can be sure that once you're in the zone and picking your lines, the MTB AllMtn 4.0 Helmet won't cause you any distractions. However, should you get caught out by tricky terrain or a sudden loss of grip, it gives reliable impact protection too - all being well you'll be dusting yourself down all safe and sound. Incredible Impact ProtectionThe MTB AllMtn 4.0 Helmet is packed with head-protecting features, keeping you safer when you find yourself caught up in a crash. At the heart of the 4.0 is a dual foam construction, featuring EPS + EP0 impact foams. These foams work in unison to soak up the forces of both slow and high-speed crashes. This protective layer is covered by a tough Polymer outer shell, enhancing structural strength and durability.An adjustable visor not only keeps off sun and dirt but if you wear goggles, the adjustability lets you easily store them below the visor too. And in the event of a crash, the visor is designed to break away, reducing the effects of rotation force impacts.360 ̊ Turbine TechnologyA key feature of this helmet is the 360 ̊ Turbine Technology. This is focused on reducing the damaging effects of a crash on your brain. It works via 360 ̊ moving discs, all made from an energy-absorbing material. These impart a reduction of rotational acceleration to the head and brain by up to 40%. The system also improves the absorption of impact energy - it reduces peak brain acceleration by up to 30% at the impact speeds associated with concussion. Feel the FreshnessWhile the focus is of course on keeping your head protected, the AllMtn 4.0 also delivers on comfort too. With 18 air vents, you'll always enjoy optimal airflow over your head, preventing too much heat from causing discomfort. With inner channels, this airflow works at both low and high speeds too. Even when you're riding hard and enjoying the heat of summer, the internal padding is quick to deal with sweat. It draws away moisture quickly to prevent it from pooling on the skin, leaving you dry and comfy. It's odour resistant too, keeping nasty smells and itch scalp at bay, ride after ride. And if you want that brand-new feel, simply remove the padding and throw it in the wash.A quick-adjust system allows you to dial in a secure fit incredibly easily while a Fidlock magnetic buckle makes it easy to pull your AllMtn 4.0 on and off. There's also a sunglasses dock port for easy, secure storage of your eyewear.Features:Lightweight Polymer shellIn-moulded EPS + EP0 impact foam for superior energy absorption360-degree Turbine Technology - Reduces forces associated with concussionAdjustable visor with breakaway function for rotational impact force reductionMaximized ventilation with 18 vents - Optimized for riding and effective even at low speedsFidlock magnetic closure systemSunglasses dock port for easy, secure storageMoisture-wicking, breathable, anti-odour and washable inner linerCertified and tested: EN1078Weight: From 430gBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.