Key Features: The RPP-1 offers simple but effective protection for your service area,This 32ÔÇØ tall pad prevents damage to bikes caused by being leaned against or knocked over onto your Park Tool professional repair stand,Covered with an attractive Park Tool blue vinyl finish for easy wiping off of dirt and grease,Compatible with Park Tool Shop Repair Stands with a 2" diameter lower post, including all generations of PRS-2 and PRS-3,Easily removed and installed with hook-and-loop material.
Park Tool Storage Hook - Wood ThreadPark Tool Threaded Storage Hook 451Park Tool Storage Hooks are pefect for hanging bikes, wheels, etc. Vinyl coated to prevent scratching.Features:Wood threaded Made from 5/16" steel rodBuy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Team Issue Repair Workstand (PRS-25)Highly adjustable to suit all bike types including those with aero-shaped frames and seatposts, the PRS-25 Team Issue Repair Workstand is ideal for those that work on various bikes and need a stand that packs away easily. The strong hexagon shaped aluminium tubes ensure it gives you the stability you need when making fine adjustments and the 360° rotatable clamp head enables you to access hard to reach areas. Park Tool has been careful to think of all the details with this repair stand, even including soft rubber pads on the clamp to prevent any damage to the bike’s frame or seatpost. This means it’s ideal for home mechanics and busy shop mechanics too.Features:Material: Proprietary "Hexatube" hex-shaped Aluminium tubing ensures low flex and no rotationAluminium leg straps ensure all parts slide, fold and unfold together100-25D Professional Micro-Adjust Clamp quickly clamps and releases nearly any tube from 23-76mm (7/8" to 3"), including aero tubesFully adjustable clamping pressureNarrow clamping jaws (2.7”/7cm) fit into tight areas or on short seatposts360º clamp rotationQuickly and easily folds to 119cm (47")Clamping height adjusts up to 152cm (60")Base when open forms a triangle of 92x92x115cm (36" x 36" x 45")Soft, durable composite rubber clamping padsSaddle cradle provides a perfect spot to temporarily rest a bike by its saddleThree-point leg system creates a stable base on smooth or rough surfacesWeight: 6kg (13 lbs)Please Note: The maximum weight holding capacity of the PRS-25 is 45kg (100 lbs). This assumes the weight is centred over the legs.Buy Park Tool Team Issue Stand - PRS25 from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Team Issue Repair Workstand PRS-22.2The PRS 22.2 Team Issue Repair Stand from Park Tool has been updated with a super-smooth and solid rotation system! It was designed originally for professional Pro Tour mechanics, to mount bikes for maintenance without clamping the frame, the bike is held in place by supporting the bottom bracket then locking either the front or rear dropouts. This stand functions perfectly with any modern axle standard, including Quick Release and every size of Thru-Axle without the need for adaptors. It is perfect for general cleaning and repair work, and it features a sturdy and solid tripod base, which folds compactly for storage; this stand is the mechanics ultimate partner.Features:Material: 6063 T6 lightweight Aluminium Adjustable BB Height: 76cm to 114cm Horizontal Rotation: 360° Main Beam Adjustment: Fore & Aft for optimised balance points Easily transported in the BAG-20 (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Park Tool portable bike stand is ideal for riders who love their last minute tweaks before races or sportives. Note: The maximum weight holding capacity of the PRS-25 is 100 lbs. (45kg). This assumes the weight is centered over the legs.
Key Features: Keep your most commonly used tools close at hand with this clever, multi-function tool holder, The TK-4 was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas, Available in two versions, the Tool Kaddie rotates for easy access and is moulded from a durable composite material, Specific slots and holders for 3-way hexes, screwdrivers, P Handles, pliers/cutters, Generic slots and holders to hold a wide variety of tools and small parts, Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately), Built in Receiver Port for PTH-1 Paper Towel Holder (sold separately).
Adding this adaptor will allow you to work on Cannondale® Lefty™ wheels, as well as 12mm, 15mm, 20mm and 25mm thru axle front wheels. increasing the capabilities of the TS-2.2 and TS-3 Truing Stands by making them compatible with rear 135mm thru axle hubs, the Truing Stand Thru-Axle Adaptor TSTA will also allow for all rear thru axle hubs to be worked on with TS-8, TS-25, TS-15, TS-7 and TS-5 stands. Constructed from a durable ACME rod, two centring cones and turning knobs at each end, this is a vital device for making your Park Tool Truing Stand more adaptable.
Park Tool Truing Stand Tilting Base TSB-2.2 The Truing Stand Tilting Base TSB-2.2 from Park Tool utilises its sturdy durable composite base and 20 degrees tilt-range to allow for comfortable wheel work and the clearest sight lines at any bench height when carrying out essential wheel maintenance. Adjustable and Versatile Stand Base Designed for use with Park Tool's TS-2, TS-2.2, and TS-2.2P Professional Wheel Truing Stands, the Truing Stand Tilting Base TSB-2.2 gives better access and angles to your wheel for more efficient working. As well as providing a steady hold, the base itself features compartments to keep your small parts and components at your fingertips, as well as spoke wrench holders to keep your required tools within easy reach. A great companion to any Park Tool truing stand, the Truing Stand Tilting Base TSB-2.2 is a brilliant fit for any workshop. Features: Material: Durable Composite Material Compatibility: TS-2, TS-2.2, and TS-2.2P Professional Wheel Truing Stands Additional Features: Small Parts Compartments, Spoke Wrench Holders Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
This detachable, steady base ensures that you get the best and most comfortable view of your wheel when straightening it out, due to its 20-degree tilt range. Built from a composite material base, it will sit flat on any workbench, with in-built slots and compartments to keep the tools and components required for the job right at your fingertips. A fantastic compliment to a great range of truing stands, the Truing Stand Tilting Base TSB-2.2 does a great job in making your realignment work more accurate and professional.
Designed for the home mechanic, TS-8 allows accurate wheel truing at an economical price. Can be used free standing or bolted to work bench Accurate wheel truing at an economical price. Constructed from heavy gauge steel to resist flexing, the TS-8 can be used freestanding or bolted to a bench for extra stability. Accepts wheels from 16" to 29", with or without the tire mounted. Innovative sliding dropout allows quick wheel installation, no matter what the hub width (up to 170mm). Dishing (centering) is performed by simply flipping the wheel in the stand
Is the worktop in your workshop running low on space or do you require to have all the gear in your van when out racing or on weekend trips away to discover new trails Then add the TS25 mounted wheel truing stand to your cycle stand and have everything in one place. Will fit the PCS-1 and PCS-4-1, PCS-4-2, and PCS-4 Repair Stands when used with the adjustable height extension.