Every aspect of the Zero Aero pedal design has been painstakingly tailored to boost speed by minimising wind drag. Developed specifically for Time Trials and Triathlons where every second counts, the Zero Aero Pedal System provides more speed with the same power. Aerodynamic Due to its aerodynamic advantage, the Zero Aero Pedal System was chosen by Bradley Wiggins to set the UCI World Hour Record of 54.526 km on June 7, 2015, at the Lee Valley Olympic Velodrome in London. The average speed of the historic ride was 33.88 mph. Considered the holy grail of cycling achievements, the Hour Record is an honour earned by the cyclist who covers the greatest distance in kilometers in one hour. Large, stable cycling platform The Zero Aero Pedal System provides the same solid connection as conventional single-sided pedals, but with Speedplay's unique, inverted design the cleat provides the platform once the cleat is engaged. Quality without compromise Zero Aero pedals use precision cartridge and needle bearings - three of them instead of two found in most other pedals - which allows the Zero Aero to be thinner for a lower stack height, better cornering clearance, and reduced aerodynamic drag. Like all Speedplay Pedal Systems, the locking edges of Zero Aero pedals and cleats are metal-on-metal for durability and safety, unlike their competitors who use engagement edges made of plastic. Foot adjustments No other pedal system offers the precise adjustment or convenience of independently adjustable fore-aft, side-to-side, and rotational foot positions. Unlike the inexact set-up of traditional cleats, each of the three critical foot-axis adjustments of Zero Aero Walkable™ Cleats can be set or changed without affecting the position of the other two adjustments. This feature also eliminates guesswork and misalignment when replacing cleats.
The TorqTite bottom bracket line is designed to replace any press fit type on the market. This means no more glue, paste or tape to try and keep things quiet. This unique and patent pending system uses a double threaded internal sleeve to tighten the right and left cups with two spanner wrenches and torque your bottom bracket tight on installation. No more movement or internal fretting of your bottom bracket against your carbon fiber or aluminium frame, just a tightened mechanical system eliminating annoying and unwanted noises. Noises and internal friction that can also sap energy and wattage output. TorqTite guarantees perfect parallel alignment between the bearings even if the frame is not perfectly straight, eliminating lost energy.Key Features: Fits BB386Evo frames - 46mm diameter with a shell width of 86.5mm, Suitable for chainsets with 30mm axle, Lightweight, machined aluminium cups, Stainless Steel Angular Contact bearings.
Speedplay Zero Stainless Road Bike PedalsWhether you’re an aspiring road racer or a seasoned endurance rider, you’ll love the support, comfort and ease of use that the Zero Stainless Road Bike Pedals offer you. The high comfort level they offer is thanks to their 0-15° of cleat float adjustment, which you can accurately adjust to suit your preference. With this amount of adjustability, you’ll be able to enjoy long rides with less knee discomfort, as your legs will be able to find their natural range of motion. Speedplay has also made these pedals to be lightweight yet also durable and strong, giving you mile after mile of smooth operation and efficient power transfer.Pedals with Dual-Sided EntryAnother invaluable feature is the dual-sided entry, which means you can just step down on the pedal and go. No more fumbling or looking down to get into the right position, as the cleat’s design and pedal’s shape ensure that you’ll engage quickly and safely without having to stop and think.Adjustable Foot Position and Float AmountUnlike traditional cleats, each of the essential foot positioning adjustments can be changed without affecting each other. The cleat's three-way adjustment ensures you can set up its front/rear and side-to-side positions individually and then choose how much float you want on the pedals. These unique adjustment settings significantly increase comfort and efficiency while dramatically reducing knee strain and fatigue.High-Grip Pedal Cleat CoversThese Zero pedals come with Speedplay's rubberised cleats, which make those off the bike periods less dangerous if your bike's mechanical problem forces an extended walk on the tarmac, or if you feel the need for a coffee stop.Features: Material: Body: Grivory; Spindle: Stainless-Steel Cleat Type: Look three-bolt road cleats Cleats Included: Yes Cleat Tension: Standard tension cleats included Axle Diameter: Standard 9/16" thread Bearing Type: Triple sealed cartridge and needle bearings Release Angle: Micro-adjustable from 0° to 7.5° Pedal Float: Adjustable from 0° to 15° Cleat Forward/backward Adjustability: Up to 13mm Cleat Left/Right Adjustability: Up to 8mm Walkable Cleats: Yes (adaptor included) Stack Height: 11.5mm (3 hole) 8.5mm (4 hole) Pedal Dimensions: 99x50x50mm / 3.9" x 2" x 2" (each) The Zero cleat positions your foot closer to the top of the spindle for improved power transfer The thin pedal profile of the Zero pedal lets you power through corners where your rivals coast - 39° The Zero cleat fits any shoe with a three-hole or four-hole mount Built-in grease port for easy bearing lubrication Walkable cleats included Phenomenally low weight Weight: 222g (pair)Technologies: Large, Stable Pedalling Platform: The Zero pedal system provides the same solid connection as conventional single-sided pedals, but with Speedplay's unique, inverted design the cleat provides the platform once the cleat is engaged Quality Without Compromise: Zero pedals use precision cartridge and needle bearings - three of them instead of the two that are found in most other pedals. This allows them to be thinner for a lower stack height, better cornering clearance and reduced aerodynamic drag. Like all Speedplay pedal systems, the locking edges of Zero pedals and cleats are metal-on-metal for durability and safety, unlike competitors who use engagement edges made of plastic True Locking Mechanism: The Zero's locking mechanism does not rely on spring tension for security, so entering and exiting Zero pedals is easy, but unintended release is virtually impossibleBuy Speedplay Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Fly is made of only two tubes making it the purist in the lightweight class. 341g takes 18kg ofluggage. Making this model even more efficient than it already is would be almost impossible.Weight - 432g (with parts)Max Load - 18kg
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fitted with high quality seals and bearings, our threaded bottom brackets are renowned for their durabilityKey FeaturesExternal bottom bracket designed for threaded bottom brackets,The machined aluminium cups hold either stainless steel cartridge bearings or ceramic bearings in stainless races,Custom Swiss made bearings are double sealed which gives a much greater life span than stock units,Cartridge bearings are replaceable,The unit is suitable for 68, 73, 83 and 100mm width bottom brackets,Designed to suit 24mm crank axles.Tech SpecsAll common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required),Available with replaceable stainless or ceramic bearings for less friction and greater durability,Designed to fit 24mm crank axles,Available for road, mtb, DH and Fatbikes,Free running labyryinth seal protects bearings and has less drag,Available in: black, silver, red, blue, purple and orange,Weight: 110g.
Hope PF41 Press Fit Stainless Bottom BracketDesigned and manufactured in the UK, this Hope Press Fit bottom bracket has stainless steel bearings and suits BB92 and BB89 bottom bracket shells. It's compatible with any crank with a 24mm axle, such as Shimano Hollowtech II chainsets and SRAM GXP (with separately sold adaptors). It can also easily be serviced with replaceable sealed bearings and external labyrinth seals.Features: Type: Press Fit Bearings: Stainless Steel Axle Compatible: 24mm Cup Diameter Measurements: 41mm external, 24mm internal Bearing cups thread into a centre tube to give a very secure, safe fit Easy to service and replaceable parts Specific fitting tool required - purchased separatelyManufacturer Reference Number: BBPF41SSN Weight: 112g (approx) Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Features: External bottom bracket designed for threaded bottom brackets Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Free running labyrinth seal protects bearings and has less drag
This bottom bracket is the ultimate, serviceable, long-life upgrade for your frame/drivetrain when wanting to step away from the manufacturers standard BB.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Road Stainless Steel Bottom BracketThe eagerly anticipated road specific external bottom bracket is now available. The machined aluminium cups hold full stainless steel cartridge bearings.These custom, Swiss made bearings are double sealed, fully serviceable and removable which gives a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Hope use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.Features: External bottom bracket designed for threaded bottom brackets The machined aluminium cups hold either stainless steel cartridge bearings or ceramic bearings in stainless races Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Cartridge bearings are replaceable Designed to suit 24mm crank axles Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
These custom, Swiss made bearings are double sealed, fully serviceable, and removable which give a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers, again increasing life and reliability. Hope uses a noncontact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.