Ritchey Stainless Steel Stem Bolt Set (6 Parts)Genuine Ritchey replacement parts, this Stainless-Steel Stem Bolt Set works with all of Ritchey’s road and mountain bike (MTB) stems that have a 31.8mm handlebar clamp and a 1.1/8” fork steerer tube clamp. Durable and corrosion-resistant, they’re ideal for giving your stem a fresher look.Features: Material: Stainless-Steel 4x M5x16mm faceplate clamp bolts 2x T25 steerer clamp bolts for 1 1/8" steerer tubes Designed for use with 31.8mm handlebars and stems Genuine Ritchey replacement parts Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
FSA Replacement Headset BearingThis Single replacement headset bearing from FSA is made from durable stainless steel and is incredibly lightweight at only 22g making it the ideal component to invest in, when you need a replacement bearing.Features:ACB 36°x45°Sold as a single bearingMaterial: Stainless steelWeight: 22gBuy FSA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
FSA TH-870S ACB Headset BearingThe smooth operating TH-870S angular contact bearing (ACB) has been made by FSA from durable steel and with its fully sealed design, it can withstand the toughest weather and most challenging terrains. Created for use in bike frames with fully integrated type headtubes, this durable headset bearing will ensure your bike has precise handling and it requires no tools for installation.Features:Material: SteelBearing Type: Sealed Cartridge Angular Contact Bearing (ACB)Headset Type: Fully IntegratedDimensions: 41.8mm x 30.5mm x 8mm (Outer diameter x inner diameter x thickness)Angles: 45°x45° Steerer Tube Compatibility: 1.1/8"Sold individuallyManufacturer's Part Number: 160-6483Weight: 22gBuy FSA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Speedplay Zero Stainless Road Bike PedalsWhether you’re an aspiring road racer or a seasoned endurance rider, you’ll love the support, comfort and ease of use that the Zero Stainless Road Bike Pedals offer you. The high comfort level they offer is thanks to their 0-15° of cleat float adjustment, which you can accurately adjust to suit your preference. With this amount of adjustability, you’ll be able to enjoy long rides with less knee discomfort, as your legs will be able to find their natural range of motion. Speedplay has also made these pedals to be lightweight yet also durable and strong, giving you mile after mile of smooth operation and efficient power transfer.Pedals with Dual-Sided EntryAnother invaluable feature is the dual-sided entry, which means you can just step down on the pedal and go. No more fumbling or looking down to get into the right position, as the cleat’s design and pedal’s shape ensure that you’ll engage quickly and safely without having to stop and think.Adjustable Foot Position and Float AmountUnlike traditional cleats, each of the essential foot positioning adjustments can be changed without affecting each other. The cleat's three-way adjustment ensures you can set up its front/rear and side-to-side positions individually and then choose how much float you want on the pedals. These unique adjustment settings significantly increase comfort and efficiency while dramatically reducing knee strain and fatigue.High-Grip Pedal Cleat CoversThese Zero pedals come with Speedplay's rubberised cleats, which make those off the bike periods less dangerous if your bike's mechanical problem forces an extended walk on the tarmac, or if you feel the need for a coffee stop.Features: Material: Body: Grivory; Spindle: Stainless-Steel Cleat Type: Look three-bolt road cleats Cleats Included: Yes Cleat Tension: Standard tension cleats included Axle Diameter: Standard 9/16" thread Bearing Type: Triple sealed cartridge and needle bearings Release Angle: Micro-adjustable from 0° to 7.5° Pedal Float: Adjustable from 0° to 15° Cleat Forward/backward Adjustability: Up to 13mm Cleat Left/Right Adjustability: Up to 8mm Walkable Cleats: Yes (adaptor included) Stack Height: 11.5mm (3 hole) 8.5mm (4 hole) Pedal Dimensions: 99x50x50mm / 3.9" x 2" x 2" (each) The Zero cleat positions your foot closer to the top of the spindle for improved power transfer The thin pedal profile of the Zero pedal lets you power through corners where your rivals coast - 39° The Zero cleat fits any shoe with a three-hole or four-hole mount Built-in grease port for easy bearing lubrication Walkable cleats included Phenomenally low weight Weight: 222g (pair)Technologies: Large, Stable Pedalling Platform: The Zero pedal system provides the same solid connection as conventional single-sided pedals, but with Speedplay's unique, inverted design the cleat provides the platform once the cleat is engaged Quality Without Compromise: Zero pedals use precision cartridge and needle bearings - three of them instead of the two that are found in most other pedals. This allows them to be thinner for a lower stack height, better cornering clearance and reduced aerodynamic drag. Like all Speedplay pedal systems, the locking edges of Zero pedals and cleats are metal-on-metal for durability and safety, unlike competitors who use engagement edges made of plastic True Locking Mechanism: The Zero's locking mechanism does not rely on spring tension for security, so entering and exiting Zero pedals is easy, but unintended release is virtually impossibleBuy Speedplay Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 104 BCD Stainless Steel ChainringReady for adventure, this solid component is compatible with 104 BCD crankset for a perfect fit. It features Wolf Tooth's patented Drop Stop technology which uses a narrow/wide tooth pattern to improve chainring life. This superb version's wide side of the tooth has maximum contact on the drive side which spreads the load while its narrow side allows for mud and debris clearance. Compatibility:These are functionally the same as the aluminium 104 BCD rings. These rings fit any 104 BCD crankset, and here are instructions on how to measure your BCD. Notes for those the plan to run a 32t chainring on a 2x Shimano crankset (XT, SLX, or Deore). 30t x 104 ring is the only Quarq power meter compatible 30t ring available.For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains. If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Chainline: Chainline (approximate as BB centering and cranksets vary) 30t - 48mm on 3x cranksets and 49mm on 2xChainring bolts are required for 1x 104 x 30t - use 10mm bolts 104 x 32t uses 6mm chainring bolts If mounting a 104 BCD bashring you will need 8mm bolts which Wolf Tooth does not sell but are standard on most triple cranksets. Features: Material: Hardened and electropolished 416 Stainless Steel Use: MTB BCD: 104 Tooth Pattern: Wide/Narrow Weight: 30T: 72g; 32T: 88gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF41 Press Fit Stainless Bottom BracketDesigned and manufactured in the UK, this Hope Press Fit bottom bracket has stainless steel bearings and suits BB92 and BB89 bottom bracket shells. It's compatible with any crank with a 24mm axle, such as Shimano Hollowtech II chainsets and SRAM GXP (with separately sold adaptors). It can also easily be serviced with replaceable sealed bearings and external labyrinth seals.Features: Type: Press Fit Bearings: Stainless Steel Axle Compatible: 24mm Cup Diameter Measurements: 41mm external, 24mm internal Bearing cups thread into a centre tube to give a very secure, safe fit Easy to service and replaceable parts Specific fitting tool required - purchased separatelyManufacturer Reference Number: BBPF41SSN Weight: 112g (approx) Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Road Stainless Steel Bottom BracketThe eagerly anticipated road specific external bottom bracket is now available. The machined aluminium cups hold full stainless steel cartridge bearings.These custom, Swiss made bearings are double sealed, fully serviceable and removable which gives a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Hope use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.Features: External bottom bracket designed for threaded bottom brackets The machined aluminium cups hold either stainless steel cartridge bearings or ceramic bearings in stainless races Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Cartridge bearings are replaceable Designed to suit 24mm crank axles Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Stainless Steel Bottom Bracket BearingGenuine replacement bearing for Hope Bottom brackets using a 24mm axle. These are constructed with stainless steel cups and 2x rubber sealsFeatures:Size: 24mm (Inner Diameter) x 37mm (Outer Diameter) x 7mm (Depth)Material: Stainless SteelSeals: 2x Rubber SealQuantity: 1 Bearing
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.